ZY-M100-1 Micro Motion Sensor

ZY-M100-1 Micro Motion Sensor Product ManualV1.1

Product Function

• Fretting detection: It can detect small movements, such as hand
  lifting, hand flicking, hand turning, etc.
• Motion detection: It can detect walking, trotting, fast
  running, circling, jumping and other movements.
• Illuminance detection: Detectable illuminance value. Adjustable
  parameters. Various parameters such as detection distance can be
  set through app.
• Presence detection: It can detect the human body standing
  still, squatting still, sitting still and other static states.
• Distance measurement: The target distance measurement function
  can accurately filter targets outside the area.
• Log query: It can query the records of human existence and
  illumination change.
• Fault detection: Equipment fault information can be
  self-checked through the app.

Application Area

Existing detection radius: 1 ~ 3M fretting detection radius: 5 ~
7M

Installation

1. Distribution network:
   • The sensor is powered by 12V and connected with the power
     adapter.
   • The indicator light of the sensor will be on for 1s and then
     flash slowly, indicating that the power on is successful.
   • The distribution network button is in the bottom cover. Open
     the cover and you can see a reset button.
   • Press and hold the reset button for more than 6S until the
     indicator light flashes and enter the ZigBee distribution
     network.
2. Installation:
   • Use the clips on both sides to install on the ceiling gypsum
     board.

Caution: Any changes or modifications to this
device not explicitly approved by the manufacturer could void your
authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the
radiator and your body.

ZY-M100-1 Micro Motion Sensor Product ManualV1.1

1 Product Function

Fretting detection
It can detect small movements, such as hand lifting, hand flicking, hand turning, etc.
Motion detection
It can detect walking, trotting, fast running, circling, jumping and other movements.
Illuminance detection
Detectable illuminance value Adjustable parameters
Various parameters such as detection distance can be set through app.

Presence detection
It can detect the human body standing still, squatting still, sitting still and other static states.
Distance measurement
The target distance measurement function can accurately filter targets outside the area. Log query
It can query the records of human existence and illumination change Fault detection
Equipment fault information can be self checked through app

Height 3M Presence sensing 1-3m Micro motion sensing 7-5 meters

2 Application Area
ZY-M100 micro motion sensor can be widely used in lighting, security, home appliances, hotels, garages, buildings, transportation. (1) “Inching” detection area: it can detect inching (small actions such as leaning head, waving, raising hands, light start, turning books, slightly tilting left and right, back and forth), movement (walking, trotting, fast running, turning, high jump and other movements), existence (standing still, squatting still); (2) “Presence” detection area: it can detect the human body in static state, such as standing still, squatting still, sitting still, etc. Detection area (related to installation height and sensitivity parameters);
existing detection radius: 1 ~ 3M fretting detection radius: 5 ~ 7M
3 Installation
(1) Distribution network The sensor is powered by 12V and connected with the power adapter. The indicator light of the sensor will be on for 1s and then flash slowly, indicating that the power on is successful. The distribution network button is in the bottom cover. Open the cover and

you can see a reset button. Press and hold the reset button for more than 6S until the indicator light flashes and enter the ZigBee distribution network. (2) Installation Use the clips on both sides to install on the ceiling gypsum board.

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.