Psi Woodworking Products Pkgrind7x Small Pepper Mill Kit Instruction Manual

PKGRIND7X Small Pepper Mill Kit

Product Information:

Product Name: PKGRIND7X Small Pepper Mill Kit

Manufacturer: PSI Woodworking Products

Kit Features:

• Includes all necessary accessories for assembly
• Compact size for easy handling
• Durable construction for long-lasting use

Required Accessories:

• Drill with a 36mm (3/16″) drill bit
• Profile of your choice for turning the blank
• Live center and end bushings for turning the blank
• Spacer bushings and knurled nut for the headstock
• Grinder mill assembly with adjustment knob and crank wheel
• Mounting screws (shorter and longer) for assembly

Product Usage Instructions:

1. Drilling the Blank:
   1. Refer to Diagram A for drilling the blank.
   2. Using a drill with a 36mm (3/16″) drill bit, drill the blank
      according to the measurements provided in the diagram.
2. Turning the Blank:
   1. Refer to Diagram B for turning the blank on the headstock.
   2. Attach the live center and end bushings to the blank.
   3. Select a profile of your choice and turn the blank
      accordingly.
3. Grind Assembly:
   1. Refer to Diagram C for grind assembly.
   2. Assemble the grinder mill by attaching the adjustment knob and
      crank wheel.
   3. Ensure that the wood is not turned down to meet the
      bushings.
4. Assembly:
   1. Refer to Diagram E for assembly.
   2. Place the bottom plate over the base with the extended portion
      facing downwards.
   3. Screw in the mounting screws (shorter) through the grinder base
      and housing into the base securely.
   4. Attach the upper cup, spring, grinder mill, and grinder base to
      complete the assembly.

#PKGRIND7X
Small Pepper Mill Kit
Kit Features:
· Easy to hold in the palm of your hand · Requires only drilling two hole sizes · Ceramic grinding parts can use salt or pepper · Only 3-3/4″ tall
Required Accessories:
· 7mm Pen Mandrel · Drill Bit(s):
1-1/16″ #FBI-116 (For thru holes) 36mm #FB36MM (For top recess) 1-1/2″ #FB150 (For bottom recess) · PKGRIND7BU Bushing set(2 pc) · Small Phillips Screw Driver · 60º Live Tailstock Center · Wood Blank Required: Minimum Size- 2″ x 2″ x 3-1/4″ H

PSI Woodworking Products

Drilling the Blank
· Square the ends of the blank to start. · Locate and mark the center of each end of the blank. · Bore a 36mm hole 3/16″ deep in the top of the blank. · Bore a 1-1/16″ hole half way through the top of the blank. · Bore a 1-1/2″ hole 3/8″ deep in the bottom of the blank. · Bore a 1-1/16″ through the bottom of the blank to meet up with the top hole.
DIAGRAM A / Drilling the Blank
36mm 3/16″

3-1/4″

0
1-1/16″

3/8″ 1-1/2″
2″

#PKGRIND7X

DIAGRAM B / Turning the

Headstock

Bottom End

Blank

PSI Woodworking Products
Spacer Bushings Knurled Nut Top End

Spacer Bushings

Live Center

End Bushings

Profile of your choice

End Bushings

Turning the Blank (see diagram B)
· Mount an end bushing wide end first on the mandrel. · Slide the blank on the mandrel onto the bushing. · Mount the other end bushing, narrow end in first into the blank. · Lock the setup tight on the mandrel, secure with the tail stock. · Turn the blank into the profile desired. Finish the wood with a food safe finish.

Diagram C Grind Assembly

Adjustment Knob

Crank Wheel

NOTE: The wood is not turned down to meet the bushings

2 Mounting Screws (Shorter)

Assembly
· Layout parts according to diagram C

This part has hole in it for shaft

· Glue the upper cup into the recess on the upper blank.

· Insert the grinder assembly,shaft in first through the hole in the bottom. Push on the Grinder mill to keep in place for the next step of assembly.
· Mount the crank wheel over the threaded end of shaft, then screw the adjustment . knob over the threads. · Line up the grinder housing rim shoulders to match the holes in the grinder
base. Cover with the bottom plate, extended portion toward the bottom (see
diagram E) Screw in through the grinder base and housing securely into the
wood. · When filled with pepper or salt, to adjust the grind just loosen or tighten the knob. · To reload the mill, remove the knob and crank wheel and reload through the top.

Diagram D / Bushings #PKGRIND7BU
1/4″
3/8″

.248 Holes through

Upper Cup
Housing
Grinder Assembly
Spring Grinder Mill Grinder Base
Bottom Plate
2 Mounting Screws (Longer)

ø1.375″

ø1.058″

same

Diagram E
© 2012 PSI Woodworking Philadelphia PA 19115 – v02/22