Bebestars 4220 2in1 Fun Park Baby Walker User Manual

4220 2in1 Fun Park Baby Walker

Product Information:

Product Name: Baby walker 2in1 Fun park

Item Number: 4220 / 4221 (805)

Standards: EN 1273 EN 71

Safety Guide:

Read the instructions carefully before use and save for future
reference. The child may be injured if you do not follow these
instructions.

It is intended for children aged about 6 months and up who can
sit on their own without assistance. Not intended for children who
can walk or weigh more than 12kg.

Do not place any load on the walker that could affect stability.
The maximum load of the walker is 12kg.

WARNING: Never leave your child unattended!

Battery Information:

No battery required for this product.

Parts List:

  1. Seat
  2. Toy tray
  3. Height adjustment
  4. Main frame
  5. Tilt adjustment
  6. Bumper
  7. Speed adjustment
  8. Anti-slip pads
  9. Wheels

Installation:

A. Insert the legs in the corresponding holes
on the base and adjust the height with the (A) button.

Install the bumper when in walker mode. Remove when in pusher
mode.

Clamp the seat on the corresponding holes on the main frame.

Install the toy bar on the main toy tray and place the tray on
the main frame of the walker.

Instructions of Use:

Use the strap on the seat to adjust the height of the
crotch.

Use the speed adjustment wheel (D) to reduce or increase the
speed of the walker.

Pusher Mode: Remove the bumper before
converting to pusher mode.

  1. Push the tilt adjustment buttons on both sides of the
    walker.
  2. Tilt the seat as shown in the picture until it locks in
    place.

Care & Maintenance:

Please check on a regular basis that the latches, connecting
elements, belt systems, and seams are properly functional.

Care for, clean, and check this product regularly. Clean with a
damp sponge or cloth and mild detergent. Do not use abrasives or
bleach.

Thank you for choosing Bebe Stars products!

Follow Us:

Website

Instagram

Facebook

63200 | Nea Moudania | Greece

Baby walker 2in1 Fun park
Item 4220 / 4221 (805)

Standards:

EN 1273 EN 71

Your child’s safety depends on you. Proper usage cannot be assured unless you follow these instruc ons. DO NOT USE THIS PRODUCT UNTIL YOU READ AND UNDERSTAND THESE INSTRUCTIONS
. .

SAFETY GUIDE

Read the instructions carefully before use and save for future reference. The child may be injured if you do not follow these instructions.

It is intended for children aged about 6 months and up who can sit on their own without assistance. Not intended for children who can walk or weigh more than 12kg.
Do not place any load on the walker that could affect stability. The maximum load of the walker is 12kg.
Warning: Avoid access to stairs, steps and non-flat surfaces. Warning: The child may move quickly and move away when using the walker. Avoid access to fireplaces, heaters and cookers. Avoid access to hot liquids, electrical cables and other potential hazards. Prevent collisions with glass doors, glass balcony doors and furniture. Do not move the walker while the baby is inside. Do not use the walker if any of its parts are broken or missing. Keep the plastic cover away from the baby, there is a risk of suffocation, etc. The walker should only be used for a short time (eg 20 ‘). When using a walker, the child should step on both feet. Adjust the height of the position appropriately to prevent falls or injuries. Do not use spare parts that are not approved by the manufacturer or distributor. Small pieces should only be assembled by adults.

!

WARNING !!!
Never leave your child unattended!

3

. .
6 . 12kg.
. 12kg.
: , .
: .
, . ,
. ,
. .
. , . (
20’). ,
. .
. .

!

!!!
!

2

BATTERY INFORMATION |

CAUTION Non-rechargeable batteries must not be recharged. Rechargeable batteries must be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision. Different type of batteries or new and used batteries must not be mixed. Only batteries of the same type as recommended are to be used, alcaline AA 1.5V. Batteries must be inserted with the correct polarity. Exhausted batteries must be removed from the toy. Toy tray should be put onto the top tray when the baby stays in the walker. Batteries should be removed if the product is not going to be used in a short while Batteries not included . . . . , AA 1,5V. . . . . .

PARTS LIST |

1

1. Seat

1.

2. Toy tray

2.

3. Height adjustment 3.

2

5

4. Main frame 5.Tilt adjustment

4. 5.

6 6.Bumber

6.

3

7. Speed adjustment 7.

8. An -slip pads

8.

9. Wheel

9.

4

7

9

8

4

INSTALLATION |

A

Insert the legs in the corresponding holes on the base

and adjust the height with the (A) bu on.

().

Install the bumber when in walker mode. Remove when in pusher mode.
. .
Clamp the seat on the corresponding holes on the main frame.
.

Install the toy bar on the main toy tray and place the tray on the main frame of the walker.
.

5

INSTRUCTIONS OF USE |
Use the strap on the seat to adjust the height of the crotch.
.

Use the speed adjustment wheel (D) to reduce or increase the speed of the walker.
(D).
Pusher mode /
Remove the bumber before conver ng to pusher mode.
.

2

1. Push the lt adjustment bu ons on both sides of

the walker.

2. Tilt the seat as shown in the picture un l it locks in 1 place.

2
1. . 2. .

6

Pusher mode /
CARE & MAINTENANCE | &
Please check on a regular basis that the latches, connec ng elements, belt systems and seams are properly func onal.
Care for, clean and check this product regularly. Clean with a damp sponge or cloth and mild detergent. Do not use abrasives or bleach. , , ,
. , . : . .
7

Thank you for choosing Bebe Stars products
Bebe Stars

FOLLOW US
www.bebestars.gr

bebestarsbygilis @bebe.stars bebestarsbygilis 63200 | Nea Moudania | Greece

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals