Go pod Wearable HD Bluetooth Headphone
Product Information
The GO pod is a wearable HD Bluetooth DAC/headphone amp that
comes with a charging case. It has a built-in mic for hands-free
calls when paired with your smartphone. The charging case has LED
indicators to show the battery status of the GO pod. It also
supports USB-C battery charge input and Qi wireless charging
battery charging input. The GO pod is capable of storing up to 8
paired Bluetooth devices.
Product Usage Instructions
- GO Pod Status Indicator: The LED on the GO pod
indicates its status as follows:- Charging: Steady Red
- Fully charged: Light off
- Awaiting connection: Flashing Blue
- Ready to pair: Alternately flash Red and Blue
- Successfully paired: Light off
- Factory Reset: Steady Blue 3s. Alternately flash Red and Green
(only operated within Gaia APP when in binaural working mode)
To enter the pairing mode manually, press the left and right touch
area together for 2 seconds until the LED flashes red/blue. The GO
pod can store up to 8 paired Bluetooth devices. - Microphone: The GO pod has a built-in mic for
hands-free calls when paired with your smartphone. To wake up your
phone’s voice assistant, single tap then hold left or right for 2
seconds on the touch control area. - Charging: The GO pod supports USB-C battery
charge input and Qi wireless charging battery charging input. The
charging box LED indicates the battery status with different LED
lights flashing when the battery is charging or fully charged. - Bluetooth Pairing: When removed from the
charging case, the GO pod automatically searches for a previously
paired device. If a stored device is not found, it automatically
enters pairing mode with LED blinking blue and red. To connect to a
Bluetooth device, turn on the phone’s Bluetooth function and select
GO pod in your Bluetooth list. - GO Pod Auto-connecting: The GO pod switch on
and connect to each other automatically when taken out of the
charging case. The GO pod will flash blue lights to indicate that
the GO pod are automatically interconnected to each other. Once
interconnected successfully, the GO pod L+R will alternately flash
the red light and blue light. - Single-GO Pod Mode: Removing the right or left
GO pod from the charging case, it will automatically turn on, and
select GO pod (Left GO pod) or GO pod (Right GO pod) in the
Bluetooth list to connect GO pod. If the GO pod has not
successfully connected to Bluetooth for more than 5 minutes, they
will automatically shut down. - iFi-Gaia: The Gaia app helps you to use all
functions and settings of the headset, such as digital filters to
adjust the sound, resetting of GO pod. To set up your Bluetooth
connection using our iFi-Gaia APP, please search for GO pod within
the Gaia app. - Ear Loops: Three ear loop pairs are supplied:
0.78mm 2-pin, MMCX. Ear loops are connected to the GO pod touch
control units.
1
1
2
2
Thank you for purchasing this GO series pod. The GO pod is an Wearable HD Bluetooth DAC/headphone amp.
1. GO pod status indicator
LED
Status
Charging:
Steady Red
Fully charged:
Light off
Awaiting connection: Flashing Blue
Ready to pair:
Alternately flash Red and Blue
Successfully paired: Light off
Factory Reset:
Steady Blue 3s. Alternately flash Red and Green (only operated within Gaia APP
when in binaural working mode)
2. Touch control area – Play/Pause/Answer the call (Single tap) – Reject/hang up (Double tap) – Skip forward (Double tap) – Skip back (Triple tap) – Volume Up (Hold right, used when in binaural working mode, not available in monaural working mode)) – Volume Down (Hold left, used when in binaural working mode, not available in monaural working mode)) – Wake up voice assistant (Single tap then hold) – Bluetooth Pairing (Hold left and right together for 2s) – Power Reset (Hold left or right for 12s, release when steady blue light is on*)
Tip: The reboot function can be used when the GO pod is abnormal or dead.
3
3
3. Microphone Built-in mic for hands-free calls when paired with your smartphone.
Tip: To wake up your phone’s voice assistant, Single tap then hold left or right for 2s the Touch control area (2).
4
4. 5V/1A USB-C battery charge input For charging only. 5V/1A and above Type-C charger.
5
5. 5V/1.5A Qi wireless charging battery charging input Use a 5V/1.5A and above Qi certified wireless charger.
6
6. Charging box LED for Battery Status
LED
Status
4/4
> 75%
3/4
> 50%
2/4
> 25%
1/4
25%
*Battery LED will flash when it is charging and will go out when it is fully charged.
Bluetooth Pairing When removed from the charging case, GO pod LED blinks blue as it automatically searches for a previously paired device. If a stored device is not found, it then automatically enters pairing mode with LED blinking blue and red.
To enter pairing mode manually, Press the left and right touch area together for 2s until LED flashes red / blue.
The GO pod is able to store up to 8 paired Bluetooth devices. Manual reconnection may still be necessary.
Connecting to Bluetooth device Turn on the phone’s Bluetooth function, and select ” GO pod” in your Bluetooth list.
GO pod Auto-connecting The GO pod switch on and connect to each other automatically when taken out of the charging case. And the GO pod will flash blue lights to indicate that the GO pod are automatically interconnection to each other. Once interconnection successfully, the GO pod L +R will alternately flash the red light and blue light.
Single-GO pod Mode Removing the right or left GO pod from the charging case, it will automatically turn on, and select “GO pod” (Left GO pod) or “GO pod” (Right GO pod) in the Bluetooth list to connect GO pod.
If the GO pod has not successfully connected to Bluetooth for more than 5 minutes, they will automatically shut down.
When the GO pod is placed back in the charging case it automatically switches off and goes into charging, the binaural hanging steady red light is always on until it is fully charged and then goes out.
Do not leave the left and right GO pod too far when you take out them from the charging case for pairing. The recommended distance is no more than 15 CM.
“iFi-Gaia”
GAIA
Client
Scan the QR code to download the app
Set up your Bluetooth connection using our iFi-Gaia APP Please search for “GO pod” within the Gaia app.
The Gaia app helps you to use all functions and settings of the headset, such as digital filters to adjust the sound, Resetting of GO pod.
L
R
L
R
L
R
L
R
Ear loops connected to the GO pod touch control units Three ear loop pairs are supplied: 0.78mm 2-pin, MMCX.
L
R
Scan the QR code to view the official iFi audio GO pod video on YouTube.
Cautions 1. Avoid extreme heat, cold and humidity. 2. Avoid dropping or crushing the GO pod, stressing ear loop by rapid pulling or extreme force, or bending
ear loop at sharp angle 3. If you experience discomfort or pain, try lowering the volume or discontinuing use
temporarily. 4. If you experience regular discomfort while using this product, discontinue use and consult the
physician.
Warning: Dry the GO pod completely before placing them in the charging case to avoid damaging the case.
Specifications Bluetooth version Codecs
Bluetooth 5.2TM LDAC*, LHDC/HWA*, aptX Adaptive, aptX, AAC, SBC
Chipset:
Qualcomm QCC 5100 Series
Chipset:
10 m
Auto impedance detection: 16/32/64/300
SNR:
32 129dB (A) / 300 132dB (A)
THD + N:
0.002% (1kHz/32)
Frequency response:
10-20kHz(-3dB) LDAC
Battery:
Ear hood 180mAh + Charging box 1500mAh
Working hours:
Ear hood ~7h + Charging box ~30h
Charging time:
Ear hood ~1.5h + Charging box ~2h
Power System:
5V/1A or 5V/2A Qi certified charger
Dimensions:
Ear hood
43.5 x 16.4 x 9.5 mm (1.7″ x 0.6″ x 0.4″)
Charging box
116 x 76 x 38.5 mm (4.6″ x 3″ x 1.5″)
Net weight:
Ear hood
12g (0.42 oz)
Charging box
126g (4.44 oz)
Limited Warranty:
12 months**
*LDAC – 660k(stereo) 990k(mono), LHDC – 560(Stereo) 900k(mono)
**12 months typical or as permitted/required by local reseller laws.
***Specifications are subject to change without notice.
