Buyers Toolbox Instructions

Buyers Toolbox Instructions

Buyers Logo

www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003

Toolbox Mounting Instructions
Please read these instructions and warnings before installation.

Buyers Toolbox Instructions

Warning-Icon DANGER
Do not use this toolbox for the storage or transportation of flammables, explosives, hazardous waste or materials such as gasoline, solvents, gun powder,  dynamite, propane tanks, acetylene tanks or cutting torches. This toolbox is only intended and safe for use in storing and transporting small tools and equipment and/or other materials.

Warning-IconWARNING

  1. If the proper mounting brackets are not used, the toolbox could drop off the vehicle while it is moving and cause personal injury and/or property damage.
  2. Mounting your toolbox through the top, back, or sides without bottom support will significantly reduce the capacity and possibly the life of the toolbox.
  3. Prior to any welding or drilling holes in a vehicle frame, check for location of fuel tanks, fuel lines, brake lines, or electrical wires.
  4. If welding is to be done on a vehicle frame in the mounting of this toolbox, disconnect the cables from the battery to prevent shorting of electrical components on the vehicle.
  5. Always wear protective eyewear when drilling, welding, or checking the underside of a vehicle.

Buyers Toolbox Instructions - 1

To properly support your Underbody Toolbox, we recommend the use of bottom support mounting brackets. These brackets should be placed so that each end  of the toolbox is supported by the full width of the mounting bracket. To prevent rust, touch-up drilled holes with aerosol paint. To prevent water leaks, apply silicone sealant all around each fastener after installation.

PART NO.QTY.DESCRIPTION
1701005One Pair of18″ x 18″ Structural Welded Brackets
1701010One Pair of18″ x 24″ Structural Welded Brackets
1701015One Pair of24″ x 24″ Structural Welded Brackets
1701005BOne Pair of18″ x 18″ Structural Bolted Brackets
1701010BOne Pair of18″ x 24″ Structural Bolted Brackets
1701006One Pair of18″ x 18″Formed Welded Brackets
1701011One Pair of18″ x 24″ Formed Welded Brackets
1701016One Pair of24″ x 24″ Formed Welded Brackets
1701006BOne Pair of18″ x 18″ Formed Bolted Brackets
1701011BOne Pair of18″ x 24″ Formed Bolted Brackets
1701030One Pair of18″ x 18″ Aluminum Brackets
1701040One Pair of24″ x 24″ Aluminum Brackets
1701031One Pair of18″ x 18″ Stainless Brackets
1701041One Pair of18″ x 24″ Stainless Brackets

WARRANTY

Buyers Products Co. warrants all truck/trailer hardware manufactured or distributed by it, to be free from defects in material and workmanship for a period of one year from date of shipment. Parts must be properly installed and used under normal conditions. Any product which has been altered, including modification, misuse, accident, or lack of maintenance will not be considered under warranty. Normal wear is excluded. The sole responsibility of Buyers Products Co. under this warranty is limited to repairing or replacing any part or parts which are returned, prepaid, and are found to be defective by Buyers Products Co. Authorization from Buyers Products Co. must be obtained before returning any part. No charges for transportation or labor performed on Buyers’ products will be allowed under this warranty.

3000105 Rev. D

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals