Halloween Dz16-050 Rocking Horse Instruction Manual

DZ16-050 Rocking Horse

Product Information

• Product Name: DZ16-050 Rocking horse
• Assembly Time: 10 minutes
• Recommended Age: 14 and up
• Power Adapter Specification: Input – 100-240V-50/60Hz, Output –
  5.9V 2A
• Operation Settings: ON1, OFF/TRY ME, ON2

Product Usage Instructions

1. Setting up the Frame:
   • Attach 3 Support Poles (B) to the Base (A) by aligning the
     quick-connected push button into the pre-drilled holes.
   • Secure the Torso Frame (C) by aligning the quick-connected push
     button into the pre-drilled holes.
2. Adding the Costume and Arms:
   • Lower the Costume (D) over the Torso Frame.
   • Insert the Right Arm (E) through the right sleeve and repeat
     for the Left Arm (F).
   • Close and velcro the hands to the sleeves.
3. Adding the Head and Horse Head:
   • Set the Head (G) onto the Torso Frame into the hole.
   • Repeat the same for the Horse Head (H).
   • Close the velcro neck to the collar.
   • Carefully connect the connector jack wired from the function
     box to the head.
   • Connect the UL adapter and Try Me button at the function box
     and run down through the costume and out the back.
4. Operation Instructions:
   • The Rocking horse has 3 operation settings which can be
     controlled from the main function control box on the torso
     frame.
   • ON1 Setting: Allows the item to be activated continuously.
   • OFF/TRY ME Setting: Allows the item to be activated only when
     the try me button is pressed.
   • ON2 Setting: Includes sound and light sensor activation. The
     item will operate for one audio cycle with sensor activation.
   • The Function Control box also includes a Volume Control knob to
     adjust the volume level.
   • Test the item before finalizing your display to set the volume
     to your liking.

Note: This product is not a toy and should be used for
decoration only. It contains small parts that can be a choking
hazard. Keep all plastic and wire parts away from children. For
best performance, operate indoors or in a sheltered outdoor area.
Store the product in its original packaging when not in use, and
keep it away from heat and moisture.

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
DZ16-050 Rocking horse

This item, when assembled by the following instructions, should take 10 minutes to assemble.Please follow the step by step guide and enjoy your Rocking horse !

CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors or in a sheltered outdoor area. We also recommend that you bring your item indoors during adverse weather (extreme cold, strong winds and/or rain). When not in use, store this product in it’s original packaging. Keep away from heat and moisture.

WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children. This product is intended for people ages 14 and up.

Please read all instructions carefully before assembling. Save this instruction sheet for future reference.

PARTS LIST

A.Base

B.Support poles x 3

C.Torso frame

D.Costume

E.Right arm

C

F.Left arm

G.Head

H.Horse head

UL Power Adapter Spec Input:100-240V-50/60Hz Output:5.9V 2A

A

H

B

E

D G

F

STEP 1:SETTING UP THE FRAME Attach 3 Support Poles (B) to the base (A) as shown and secure by aligning the quick-connected push button into the pre-drilled holes.The torso frame (C)as shown and secure by aligning the quick-connected push button into the pre – drilled holes.

C B
B B
A
STEP 2:ADDING THE COSTUME AND ARMS Lower the costume (D) over the torso frame.Side right arm (E) up through the right sleeve , repeat for the left arm(F),close and velcro on hands to sleeve.

D F
E

1/2

PROCEED TO PAGE 2>>

STEP 3:ADDING THE HEAD AND HORSE HEAD Set the head (G) onto the torso frame into the hole,repeat for the horse head(H).close the velcro neck to collar.Carefully connect connector jack wired from the funtion box to the head,Connect the UL adapter and Try Me button at the funtion box and run down through the costume and out the back.
G H
FINISH
OPERATION INSTRUCTION The Rocking horse has 3 operation settings which can be the main function control box on the torso frame. ON1:This setting allows the item to be activated . OFF/TRY ME: This setting allows the item to only be activated when you push the try me button is activated. ON2:This setting included sound and light sensor ,this setting allows the item to only be activated when the sensor is activated.the item will operate for
one audio -cycle with sensor activation. ENJOY YOUR Rocking horse ! The Function Control box also includes a Volume Control knob, which allows you to adjust the volume to be as loud or as quiet as needed. Be sure to test the item before finalizing your display so you can set the volume to your liking.
2/2