IT-A 112 PA 2400 Watts 2 Way Passive Speaker
Product Information
The Pro DG Systems IT-A 112 PA is a self-powered multipurpose
sound system that is designed, assembled, and optimized in Spain.
It has a power handling capacity of 500 W (RMS) and a frequency
range that allows for high-quality sound output. The system comes
with an amplifier and a range of controls that allow for easy
management of the sound output. The cabinet is made of
CNC-fabricated 15mm birch plywood and has a special textured black
paint finish. It also has rigging points, connectors, and a 2mm
metal grille with 0.5mm acoustic foam.
Product Usage Instructions
Before using the Pro DG Systems IT-A 112 PA, it is recommended
that you read the user manual and save it for later use. The system
is designed for use by authorized professionals who have sufficient
knowledge of its use and can follow the instructions provided. The
fiability, safety, and efficiency of the system are only guaranteed
by Pro DG Systems if the temperature ambiental is acquired and if
no unauthorized personnel without enough knowledge of use access
the system.
The system comes with an amplifier and a range of controls that
allow for easy management of the sound output. These include an
ON/OFF switch, volume control, Bluetooth ON/OFF switch, TWS switch,
DSP management switch, and an LCD display for presets selection.
The rigging points, connectors, and controls are located on the
cabinet of the system.
The Pro DG Systems IT-A 112 PA has been specially designed to
provide high-quality sound output. It has a power handling capacity
of 500 W (RMS) and a frequency range that allows for optimal
performance. The cabinet is made of CNC-fabricated 15mm birch
plywood and has a special textured black paint finish. It also has
rigging points, connectors, and a 2mm metal grille with 0.5mm
acoustic foam.
It is important to note that Pro DG Systems is not responsible
for any inadequate use of the system by unauthorized personnel
without enough knowledge of use. Therefore, it is recommended that
only authorized professionals use the system and always follow the
instructions provided in the user manual.
An updated .pdf version of this manual is always available at: www.prodgsystems.com
0
Pro DG Systems IT-A 112 PA. Manual de usuario – User manual
Indice Index
Introducción / Introduction – Descripción / Description ………………………………………………………………. Pag 4 – Especificaciones técnicas y arquitecturales / Technical
and architectural specifications ………………………………………………………… Pag 5
Interior del IT-A 112 PA / Inside IT-A 112 PA – Características principales del transductor, Especificaciones
técnicas, Parámetros Thiele-Small, Información de montaje, Curva de Impedancia, Respuesta de frecuencia y distorsión / Speaker key features, Technical specifications, Thiele-Small parameters, Mounting information, Free air impedance curve, Frequency response and distortion ………………………………………………… Pag 6-7 – Características principales de la bocina de directividad constante de IT-A 112 PA / Features of IT-A 112 PA constant directivity horn …………………………………………………………………………… Pag 8 – Motor de compresión de IT-A 112 PA. Características principales (1 unidad), Información de montaje, Dimensiones, Respuesta de Frecuencia y distorsión, Curva de Impedancia. IT-A 112 PA Compression driver, features (1 unit), Mounting Information, Dimensions, Frequency Response & Distortion, Impedance Curve …………………………………………………………………….. Pag 9-10
Amplificación / Amplification ………………………………………………………. Pag 11 Hardware / Hardware …………………………………………………….. Pag 12-13-14-15 Software de predicción / Prediction Software …………………………………. Pag 16 Accesorios / Accessories ………………………………………………………….. Pag 17
1
PRO DG SYSTEMS LE DA LAS GRACIAS POR ADQUIRIR ESTE SISTEMA DE SONIDO PROFESIONAL TOTALMENTE DISEÑADO, ENSAMBLADO Y OPTIMIZADO EN ESPANA Y LE DESEAMOS QUE DISFRUTE CON SU ALTA CALIDAD Y PRESTACIONES.
El sistema ha sido diseñado, ensamblado y optimizado por Pro DG Systems en un estado técnicamente perfecto. Para conservar este estado y asegurar el correcto funcionamiento el usuario ha de respetar las siguientes indicaciones y advertencias de este manual.
LA FIABILIDAD, SEGURIDAD Y RENDIMIENTO DEL SISTEMA ESTAN UNICA Y EXCLUSIVAMENTE GARANTIZADAS POR PRO DG SYSTEMS CUANDO:
· El montaje, manipulación, reajuste y los cambios o reparaciones hayan sido realizados por Pro DG Systems.
· La instalación eléctrica cumpla con la determinación IEC (ANSI).
· El sistema se use según las indicaciones de uso.
ADVERTENCIA: · Si se destapan protecciones o se retiran piezas del chasis, exceptuando las que se puedan retirar manualmente, se pueden dejar piezas al descubierto que sean conductoras de tensión.
· Cualquier ajuste, manipulación, optimización o reparación del sistema debe ser realizada única y exclusivamente por Pro DG Systems. PRO DG SYSTEMS NO SE RESPONSABILIZA DE NINGUN DANO QUE SUFRA EL SISTEMA A CAUSA DE UNA MANIPULACION, AJUSTE, OPTIMIZACION O REPARACION REALIZADA POR PERSONAL NO AUTORIZADO POR PRO DG SYSTEMS.
· Niveles elevados de intensidad de sonido pueden ser causa de daños auditivos se debe evitar acercarse demasiado a altavoces que funcionen a altos niveles, de to contrario se deben usar protecciones auditivas.
ACOMETIDA A LA RED: · El sistema está fabricado para un funcionamiento continuo.
· La tensión de funcionamiento ajustada tiene que coincidir con la tensión de la red del lugar.
· La conexión a la red eléctrica se efectuará con la fuente de alimentación o cable de red que se entreguen con el sistema.
· Fuente de alimentación: una línea de conexión dañada no se puede sustituir. La fuente de alimentación no se puede volver a poner en funcionamiento.
· Evite una conexión de la red eléctrica a distribuidores con muchas tomas de corriente.
· El enchufe para el suministro de corriente tiene que estar cerca del aparato y ser de fácil acceso.
SITUACION: · El sistema debe situarse en una superficie limpia y totalmente horizontal.
· El sistema no puede estar expuesto a ninguna sacudida o movimiento durante su funcionamiento.
· Evite el contacto del sistema con el agua y superficies húmedas.
· Procure que el sistema disponga de la suficiente ventilación y no bloquee ni tape ninguna abertura de ventilación.
· Evite la exposición directa con el sol, así como la proximidad a fuentes emisoras de calor o radiación.
· Si el sistema sufre un cambio extremo de temperatura es posible que afecte
a su funcionamiento, antes de poner en marcha el sistema espere que éste 2
haya adquirido la temperatura ambiental.
PRO DG SYSTEMS GIVES YOU THANKS FOR ACQUIRE THIS PROFESSIONAL SOUND SYSTEM FULLY DESIGNED, ASSEMBLED AND OPTIMIZED IN SPAIN, WE WISH THAT YOU ENJOY WITH ITS HIGH QUALITY AND PERFORMANCE.
· This system has been designed, fabricated and optimized by Pro DG Systems in perfect working order. To maintain this condition and ensure the right operation, the user must respect the following indications and advices of this manual.
THE FIABILITY, SAFETY AND EFFICIENCY OF THE SYSTEM ARE ONLY AND EXCLUSIVELY GUARANTEED BY PRO DG SYSTEMS IF:
· Assembly, manipulation, re-adjustment and modifications or repairs are carried out by Pro DG Systems.
· The electrical installation complies with the requirements of IEC (ANSI).
· The system is used according to the use indications.
WARNING: · If protectors are opened or sections of chassis are removed, except where this can be done manually, live parts can become exposed.
· Any adjustment, manipulation, optimization or reparation of the system must be done only and exclusively by Pro DG Systems. PRO DG SYSTEMS IS NOT RESPONSIBLE OF ANY DAMAGE OF THE SYSTEM CAUSED BY A MANIPULATION, ADJUSTMENT, OPTIMIZATION OR REPARATION REALIZED BY
NO-AUTHORIZED PERSONAL BY PRO DG SYSTEMS
· High loudspeaker levels can cause hearing damage, it must avoid the direct contact with loudspeakers operating at high levels, Dtherwise it must use hearing protectors.
MAIN CONNECTION: · The system is designed for continuous operation
· The set operating voltage must match the local mains supply voltage.
· The unit has to be connected to the main via the supplied power unit or power cable.
· Power unit: never use a damaged connection lead. Any type of damage must be fixed.
· Avoid connection to the mains supply in distributor boxes together with several other power consumers.
· The plug socket for the power supply must be positioned near the unit and must be easily accessible.
PLACE OF SITUATION: · The system should stand only on a clean and totally horizontal surface.
· The system must not be exposed to any type of vibration during its operation.
· Avoid the contact with the water or wet surfaces. Do not place objects containing liquid on the system.
· Procure that the system has sufficient ventilation and do not block or cover any ventilation opening. Obstruct the ventilation may cause overheating in the system.
· Avoid direct exposure to the sun, as well as proximity to sources of heat or radiation.
· If the system undergoes an extreme change in temperature may affect its operation, before starting the system hope it has reached room temperature.
ACCESORIOS:
· El sistema no debe colocarse encima de ningún soporte inestable que pueda causar daños personales o al sistema coloque el sistema solo en un carro, rack, tr(pode, soporte recomendado o suministrado por Pro DG Systems siguiendo las indicaciones de instalación. El conjunto del sistema con el pedestal se debe mover con mucho cuidado. La aplicación de una fuerza desmesurada o un suelo irregular puede ocasionar la caída de todo el conjunto.
· Piezas adicionales: no utilice nunca piezas adicionales que no estén recomendadas por Pro DG Systems. El uso de piezas no recomendadas puede provocar accidentes y rotura del sistema.
· Para proteger el sistema de una tormenta o si éste no se supervisa o utiliza durante algún tiempo, se debe desconectar la clavija de la red. Así se evitan daños en el sistema a causa de un rayo y golpes de tensión en la red de corriente alterna.
SE RECOMIENDA AL USUARIO LEER ESTAS INSTRUCCIONES ANTES DE USAR EL SISTEMA Y GUARDAR PARA SU USO POSTERIOR.
PRO DG SYSTEMS NO SE RESPONSABILIZA DEL USO INADECUADO DEL SISTEMA POR PARTE DE PERSONAL NO AUTORIZADO SIN LOS SUFICIENTES CONOCIMIENTOS DE USO.
EL USO DE LOS PRODUCTOS PRO DG SYSTEMS ESTA INDICADO PARA LOS PROFESIONALES AUTORIZADOS QUE DEBEN POSEER LOS SUFICIENTES CONOCIMIENTOS DE USO DEL MISMO Y SIEMPRE RESPETANDO LAS INDICACIONES QUE SE MUESTRAN A CONTINUACION EN ESTE MANUAL.
ACCESSORIES:
· Do not place the system on a unsteady base that can be cause of damage to people or to the system, use it only with the trolley, rack, tripod or base recommended or supplied by Pro DG Systems following the installation indications. The system’s combination must be moved very carefully. The application of an excessive use of force and uneven floors can cause the combination of system and stand to tip over.
· Additional equipment: don’t use additional equipment wich has not be recommended by Pro DG Systems. The use of not recommended equipment can cause accidents and damage to the system.
· To protect the system during bad weather or when left unattended for prolonged periods, the main plug should be disconnected. This prevents the system being damaged by lightning and power surges in the AC mains supply.
IT IS RECOMMENDED TO THE USER READ THESE INSTRUCTIONS BEFORE USING THE SYSTEM AND SAVE FOR LATER USE.
PRO DG SYSTEMS IS NOT RESPONSIBLE OF AN INADEQUATE USE OF THE SYSTEM BY NO-AUTHORIZED PERSONNEL WITHOUT ENOUGH KNOWLEDGE OF USE.
THE USE OF THE PRO DG SYSTEMS PRODUCTS IS INDICATED FOR AUTHORIZED PROFESSIONALS THAT MUST TO HAVE ENOUGH KNOWLEDGE OF THE SYSTEM USE AND ALWAYS RESPECTING THE INDICATIONS SHOWED BELOW.
DESIGNED, ASSEMBLED AND OPTIMIZED IN SPAIN
3
Introducción – Introduction
[ES] Este manual ha sido diseñado para ayudar a los usuarios del sistema IT-A 112 PA de Pro DG Systems a la correcta utilización y entendimiento de los beneficios y versatilidad del mismo. IT-A 112 PA es un sistema multifunción autoamplificado totalmente diseñado, ensamblado y optimizado en España.
[EN] This manual has been designed to help all the users of the system IT-A 112 PA of Pro DG Systems to its correct use as well as for the understanding of the benefits and versatility of the same. IT-A 112 PA is a self-powered multipurpose system totally designed, assembled and optimized in Spain.
IT-A 112 PA
Totalmente diseñado, ensamblado y optimizado en España Totally designed, manufactured and optimized in Spain.
Descripción – Description
[ES] IT-A 112 PA es un sistema multifunción autoamplificado de dos vías equipado con un altavoz de 12″ en un recinto sintonizado. La sección de agudos cuenta con un motor de compresión de 1/4″ acoplado a un difusor rotable con cobertura 80×50. IT-A 112 PA incorpora un módulo de amplificación Clase-D de última generación y procesamiento propio de uso muy intuitivo para un fácil manejo y absoluto control, listo para enchufar y trabajar. Perfecto para ser utilizado como P.A, frontfill y sidefill con o sin subwoofer, como sistema portátil o instalación permanente. Permite ser utilizada individualmente, o para trabajar estacada o volada horizontalmente con dos o más unidades juntas como sistema X-Array de curvatura constante, o adaptada verticalmente gracias a su hardware especial de vuelo, para trabajar también como sistema Line Array.
[EN] IT-A 112 PA is a 2-way multipurpose self-powered system equipped with one (1) speaker of 12″ in a tuned enclosure. The HF section has one (1) compression driver of 1/4″, coupled to one (1) rotating diffuser of 80×50. IT-A 112 PA incorporates state-of-the-art Class-D amplification and a very intuitive processing for easy handling and absolute control, ready to plug in and work. It is perfect to be used as P.A, frontfill and sidefill with or without subwoofer, as portable system or permanent installation. It can be used individually and horizontally stacked or flown with two or more units together as X-Array system of constant curvature, or vertically adapted thanks to its special flight hardware to work as a Line Array system as well.
4
Especificaciones técnicas – Technical specifications
Power Handling: Nominal Impendence: Average Sensitivity: Calculated Maximum SPL: Frequency Range: Nominal Directivity: Low / Mid Frequency Driver: Mid Frequency Cut-off: High Frequency Driver: High Frequency Cut-off: Amplifier included:
Rigging points: Connectors: Controls:
Acoustic Enclosure: Power Supply: Finish: Grille / Hardware:
Cabinet Dimensions: Weight:
2400 W peak / 1200 W program / 600 W RMS (EIA 426A Standard). 8 Ohm 100 dB / 2.83V / 1m (average of 150 – 16000Hz wideband). 1m 130 dB continuous / 133 dB program / 136 dB peak. +/- 3dB between 40 Hz – 18 KHz. 80×50 rotating diffuser. One (1) Pro DG Systems speaker of 12″, 8 Ohm, 500 W. 70 Hz Linkwitz-riley 24 filter – 1200 Hz Linkwitz-riley 24 filter. One (1) Pro DG Systems driver of 1/4″, 8 Ohm, 100 W. 1200 Hz Linkwitz-riley 24 filter – 18000 Hz Linkwitz-riley 24 filter. Last generation Class-D amplifier with voltage selector. 96kHz, 24 bit DSP processor with 3 factory presets.
12 x M10 1 XLR channel / combo with output for satellite + XLR Link. ON/OFF switch, volume control, Bluetooth ON/OFF switch, TWS switch, DSP management switch + LCD display for presets selection.
CNC fabrication in 15mm birch plywood. 110~220V 50/60HZ with voltage selector. Special textured black paint finish. 2 mm metal grille with 0.5 mm acoustic foam + 2 handles with aluminum handgrip. (HxWxD); 690x390x380mm (27,16″x15,35″x14,96″). 28,5 Kg (62,83 lbs) net / 29,9 Kg (65,92 lbs) with packaging.
Especificaciones arquitecturales – Architectural specifications
5
Interior del IT-A 112 PA – Inside IT-A 112 PA
[ES] El interior del IT-A 112 PA está compuesto por un altavoz Pro DG Systems de 12″, 500 W (RMS). Especialmente diseñado bajo nuestros propios parámetros para el mejor rendimiento del sistema.
[EN] IT-A 112 PA counts with one Beyma speaker of 12″, 500 W (RMS). Specially designed under our own parameters for the best performance of the system.
KEY FEATURES
High power handling: 1000 W program power 3″ copper wire voice coil. High sensitivity: 97 dB (1W / 1m) FEA optimized ceramic magnetic circuit Designed with MMSS technology for high control, linearity and low harmonic distortion Waterproof cone treatment on both sides of the cone Xmax ± 6,3 mm / Xdamage ± 30 mm Low harmonic distortion and linear response
TECHNICAL SPECIFICATIONS
Nominal diameter
300 mm (12 in)
Rated Impedance
8
Minimum impedance
6,5
Power capacity
500 W (RMS)
Program power
1000 W
Sensitivity
97 dB 1W / 1m @ ZN
Frequency range
45 – 5.000 Hz
Recom. Enclosure vol. 30 / 100 l 1,06 / 3,53 ft3
Voice coil diameter
77 mm (3 in)
Bl factor
18 N / A
Moving mass
0,062 kg
Voice coil length
16 mm
Air gap height
8 mm
Xdamage (peak to peak)
30 mm
Especialmente diseñado bajo nuestros propios parámetros para el mejor rendimiento del sistema.
Specially designed under our own parameters for the best performance of the system.
6
THIELE-SMALL PARAMETERS*
Resonant frequency, fs D.C. Voice coil resistance, Re Mechanical Quality Factor, Qms Electrical Quality Factor, Qes Total Quality Factor, Qts Equivalent Air Volume to Cms, Vas Mechanical Compliance, Cms Mechanical Resistance, Rms
Efficiency, 0 Effective Surface Area, Sd Maximum Displacement, Xmax ** Displacement Volume, Vd Voice Coil Inductance, Le @ 1 kHz
42 Hz 5,8 5,6 0,30 0,28 91,1 l
229 m / N 2,9 kg / s 2,2 % 0,053 m2 6,3 mm 334 cm3 1 mH
MOUNTING INFORMATION
Overall diameter Bolt circle diameter
Baffle cutout diameter: – Front mount Depth Net weight
312 mm (12,28 in) 294,5 mm (11,59 in)
278 mm (10,94 in) 131 mm (5,16 in) 5,5 kg (12,12 lb)
* T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working for a short period of time).
** The Xmax is calculated as (Lvc – Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and Hag is the air gap height.
FREE AIR IMPEDANCE CURVE
FREQUENCY RESPONSE AND DISTORTION
Note: On axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber, 1W @ 1m 7
Interior del IT-A 112 PA – Inside IT-A 112 PA
[ES] IT-A 112 PA incorpora además una bocina rotable de directividad constante, específicamente diseñada para trabajar con un motor de compresión Pro DG Systems de 100 W RMS. Las características de directividad constante de este modelo aseguran poder cubrir 80º de amplitud horizontal y 50º de amplitud vertical (en función de su posición), en prácticamente cualquier frecuencia dentro de su radio de acción.
[EN] IT-A 112 PA also incorporates a constant rotatable directivity horn specifically designed to work with one Pro DG Systems compression driver of 100 W RMS. Its constant directivity characteristics ensure the ability to cover 80º wide horizontally and 50º wide vertically (depending on its position), at virtually any frequency within its operational range.
KEY FEATURES
· Designed to work with one (1) Pro DG Systems compression driver of 100 W RMS.
· Uniform response, on and off – axis with a neutral frequency reproduction.
· Coverage angles of 80º in the horizontal plane and 50º in the vertical plane (depending on its position).
· Precise directivity control in the pass band. · Square and compact design , providing versatile
mounting options with cast aluminum construction.
TECHNICAL SPECIFICATIONS
Throat diameter
36 mm. 1.4 in.
Horizontal beamwidth Vertical beamwidth
80º (+16º, -32º) (-6 dB, 1 – 20 kHz)
50º (+29º , -14º) (-6 dB, 1.6 – 20 kHz)
Directivity factor (Q) 12.4 (average 0.63 – 16 kHz)
Directivity index (DI)
10.5 dB (+3.5 dB, -3.2 dB)
Cutoff frequency
800 Hz
Size (WxHxD) 235x235x120mm (9.25×9.25×4.72in)
Net weight
1.2 kg (2.64 lb)
Construction
Cast aluminum.
8
Interior del IT-A 112 PA – Inside IT-A 112 PA
[ES] IT-A 112 PA está compuesto además por un motor de compresión Pro DG Systems de 100 W RMS acoplado a una guía de onda. Especialmente diseñado bajo nuestros propios parámetros para el mejor rendimiento del sistema.
[EN] IT-A 112 PA is also composed by one Pro DG Systems compression driver of 100 W RMS coupled to a wave guide. It is specially designed under our own parameters for the best performance of the system.
KEY FEATURES (ONE UNIT)
· High power handling: 100 W RMS. · Lightweight PM-4 polymer diaphragm. · Excellent high frequency response with low distortion. · Excellent sensitivity: 111 dB, 2,83 V @ 1m. · 200 W program power above 1,2 kHz.
TECHNICAL SPECIFICATIONS
Throat diameter
36 mm (1.4 in)
Rated impedance
8 ohms
Minimum impedance
5.2 ohms @ 3.5 kHz
D.C. Resistance
4.3 ohms
Power capacity
100 W RMS above 1.2 kHz
Program power
200 W above 1.2 kHz
Sensitivity *
111 dB (2.83 V @ 1m)
coupled to IT-A 212 P.A. horn
Frequency range
0.7 – 19 kHz
Recommended crossover 1.2 kHz or higher
Voice coil diameter Magnetic assembly weight Flux density
(12 dB/oct. min.) 44.4 mm (1.75 in)
1.86 kg (4.1 lb) 1.65 T
BL factor
6,6 N/A
CONSTRUCTION MATERIALS
Diaphragm
PM-4 polymer
Voice coil
Ultra lightweight edge wound
aluminum voice coil
Voice coil former
Aluminum cover
Magnet
Ferrite
Note: * Sensitivity was measured at 1m distance on axis with 1w input, averaged in the range 1-7 KHz
MOUNTING INFORMATION
Overall diameter
120 mm (4.72 in)
Depth
65 mm (2.56 in)
Mounting
Four M5 threaded holes, 90º apart on 101,6 mm (4″) diameter circle
Net weight (1 unit)
2.04 kg (4.5 lb)
9
DIMENSION DRAWINGS
FREQUENCY RESPONSE AND DISTORTION
Note: On axis frequency response measured coupled to IT-A 112 P.A. horn in anechoic chamber 2,83 v @ 1m.
FREE AIR IMPEDANCE CURVE
Note: Electrical impedance measured coupled to IT-A 112 P.A. horn
10
Amplificación de IT-A 112 PA – IT-A 112 PA Amplification
[ES] IT-A 112 PA incorpora un nuevo módulo de amplificación Clase-D de última generación con selector de corriente. Procesador DSP de 96kHz, 24 bit con 3 presets de fábrica. Interruptor de encendido / apagado, nivel de volumen, interruptor de encendido / apagado de Bluetooth, interruptor TWS, interruptor de gestión DSP+ pantalla LCD selección de presets.
[EN] IT-A 112 PA incorporates a new Class-D amplification module with voltage selector. 96kHz DSP Processor, 24 bit with 3 factory presets. ON/OFF switch, volume control, Bluetooth ON/OFF switch, TWS switch, DSP management switch + LCD display for presets selection.
11
Hardware para instalación – Hardware for installation
Trípode (Opcional) / Tripod (Optional)
[ES] – Material:
Aluminio recubierto de pintura negra. Fijación en 5 pasos (17 cm cada paso), incluye perno de seguridad.
– Altura: 125cm hasta 195cm / 49.21″ – 76.77″
–
– Carga Máxima:
32 Kg / 70.55 lbs.
– Diametro del tubo:
35mm – 1.38″
– Dimensiones (plegado): 1040x120x120mm
40.94×4.72×4.72 in
[EN] – Material:
Aluminum with black powder coating. Five steps fixation (17cm each step), it includes safety bolt.
– Height: 125cm to 195cm / 49.21″ to 76.77″
– Max load:
32 Kg / 70.55 lbs.
– Tube diameter:
35mm – 1.38″
– Folded Dimensions:
1040x120x120mm
40.94×4.72×4.72 in
Interacción con subgraves (Opcional) / Interaction with subwoofers (Optional)
[ES] Accesorio extensible para IT-A 112 PA.
– Material:
Acero reforzado.
– Color:
Negro.
– Diametro del tubo:
35mm – 1.38″
– Altura: 840mm – 1120mm / 33.07″ – 44.09″
[EN] Extensible bar with thread for IT-A 112 PA.
– Material:
Reinforced steel.
– Colour:
Black.
– Tube diameter:
35mm – 1.38″
– Height: 840mm – 1120mm / 33.07″ – 44.09″
12
[ES] Accesorio extensible con manivela y sistema »Ring Lock« de König & Meyer para IT-A 112 PA. (Opcional)
– Material:
Acero reforzado.
– Color:
Negro.
– Extremo(s) del tubo: »Ring Lock« 35 hasta 37mm de
diámetro perno roscado M20.
– Altura:
920mm – 1520mm / 36.22″ – 59.84″
– Ajuste de altura:
Manivela con sistema de botón y tornillo de seguridad.
– Combinación de Barra: Diseño plegable de dos piezas.
– Características:
Sistema de expansión patentado »Ring Lock«; conexión sin vibraciones debido a férulas de plástico movibles ; sistema de botón y manivela para evitar el movimiento inverso incontrolado; tornillo de bloqueo para seguridad adicional; perno de M20 para un ajuste preciso y vertical.
– Peso:
3.86 kg / 8.51 lbs.
[EN] Distance rod with hand crank and »Ring Lock« system from König & Meyer for IT-A 112 PA. (Optional)
– Material: – Colour: – Tube end(s):
Reinforced steel. Black.
»Ring Lock« diameter 35 to 37 mm, threaded bolt M20.
– Height:
920mm – 1520mm / 36.22″ – 59.84″
– Height adjustment:
Hand crank with push-button system and locking screw.
– Rod combination:
2-piece folding design.
– Features:
Patented expanding mandrel system »Ring Lock«; vibration free connection due to moveable plastic splints; push -button system and hand crank avoid uncontrolled reverse motion; locking screw provides additional safety; M20 bolt for precise and vertical fit.
– Weight:
3.86 kg / 8.51 lbs.
13
[ES] Soporte “T” para dos unidades IT-A 112 PA (Opcional)
– Material:
Acero reforzado.
– Perno de montaje: Diámetro 35x120mm / 1.38×4.72 in
– Anchura:
Ajustable de 310 a 490mm. 12.20 – 19.29 in.
– Carga Máxima:
2 x 32 Kg / 2 x 70.55 lbs.
[EN] “T” support for two (2) units IT-A 112 PA (Optional)
– Material:
Reinforced steel.
– Mounting bolt:
Diameter 35x120mm / 1.38×4.72 in
– Width:
Adjustable from 310 to 490mm. 12.20 – 19.29 in.
– Max Load:
2 x 32 Kg / 2 x 70.55 lbs.
Cáncamo para instalación en pared o techo (Opcional) / Eyebolt for wall or ceiling installation (Optional)
[ES] Bracket de instalación en pared con poste de montaje de acero y angulación ajustable para soportar hasta 32 Kg (70.55 lbs) y 300mm (11.81 in) de longitud (Opcional) [EN] Wall mount bracket with steel mounting pole and adjustable angulation to support up to 32 Kg (70.55 lbs) and with a length of 300mm (11.81 in) (Optional)
14
[ES] Hardware de vuelo para IT-A 112 P.A.
[EN] Flight Hardware for IT-A 112 P.A.
[ES] Bumper de vuelo para trabajar en modo cluster.
[EN] Flight Bumper to work in cluster mode.
[ES] Bumper de vuelo para trabajar como sistema Line Array.
[EN] Flight Bumper to work as Line Array system.
[ES Dispone de Hardware y Bumpers de vuelo para elevar hasta 3 unidades IT-A 112 P.A. horizontalmente en modo cluster, o para trabajar verticalmente como sistema Line Array (Opcional). Incluye cautro pinlocks magnéticos + grillete.
[EN] Flight Hardware and Bumpers to raise up to 3 units IT-A 112 P.A. horizontally adapted in cluster mode, or vertically adapted to work as Line Array system are available (Optional). Four pinlocks and one shackle are included.
[ES] Bumper de vuelo para elevar hasta 3 unidades IT-A 112 P.A. horizontalmente en modo cluster.
[EN] Flight Bumper to raise up to 3 units IT-A 112 P.A. horizontally adapted in cluster mode.
[ES] Bumper de vuelo para elevar hasta 3 unidades IT-A 112 P.A. verticalmente como sistema Line Array.
[EN] Flight Bumper to raise up to 3 units IT-A 112 P.A. vertically adapted to work as Line Array system.
15
Software de predicción – Prediction software.
[ES] En Pro DG Systems sabemos que fabricar cajas acústicas de alta calidad es una parte importante del trabajo. La garantía de poder utilizar los sistemas adecuadamente, es la otra parte fundamental de nuestro trabajo realizado. Las buenas herramientas marcan la diferencia para lograr un óptimo uso de los sistemas. IT-A 112 PA dispone de Software de predicción Ease Focus V2, con el cual podemos simular el comportamiento de diferentes sistemas en distintos lugares y circunstancias, así como obtener información sobre cobertura, frecuencia, SPL y comportamiento general del sistema, de una manera sencilla y cómoda para el usuario. Es muy sencillo de manejar y disponemos de cursos de entrenamiento para los usuarios de productos Pro DG Systems. Haga clic aquí para dirigirse al enlace de descarga de EASE Focus V2.5.10. Haga clic aquí para descargar el archivo GLL de IT-A 112 PA Para más información consulte con nuestro servicio técnico en: [email protected]
[EN] In Pro DG Systems we know that making high quality speakers is an important part of our job. Then, offering the warranty of using speakers properly is another part which is also fundamental in our job. Good tools make the difference for an optimal use of the system. With Ease Focus V2 prediction software for IT-A 112 PA we can design different configurations between systems and simulate their behavior in different places and circumstances like obtain information of: coverage, frequency, SPL and general system behavior in an easy and comfortable way. It is easy to handle and we offer training courses for Pro DG Systems users. Click here to redirect to the download link of EASE Focus V2.5.10. Click here to download GLL file for IT-A 112 PA For more information, consult our technical service at: [email protected]
16
Accesorios – Accesories.
[ES] Disponible de cableado completo del sistema listo para funcionar. [EN] Complete cabling for the system is available and ready to use.
17
www.prodgsystems.com
18
Home | Ahnert Feistel Media Group
