850/1000 Rear Receiver Hitch
Product Information: Sportsman & Scrambler – 850/1000 2
Rear Receiver Hitch
| Part # | Hardware Kit | Kit Components |
|---|---|---|
| 101490 | HK-061 |
|
Product Usage Instructions:
Follow the steps below to install the Rear Receiver Hitch:
- Place the 1/2 x 1-1/2 bolt with flat washer through the hole
(A) in the frame (see Figure 2 & 3). Place two 1/2 lock washers
on the 1/2 bolt (see Figure 2). - Repeat step 1 for the other side (B).
- Place the hitch into the desired location. Put the two 1/2 hex
nylock nuts and flat washers loosely on the bolts installed in
previous steps (see Figure 3). - Slide the 1/2 x 2-1/2 hex bolt through the OEM hitch pin hole
and loosely attach using the 1/2 hex nylock nut and flat washer
(see Figures 1 & 3). - Tighten down all hardware.
Note: Do not exceed the manufacturer’s recommended towing
capacity.
Figure 1:
Figure 2:
Figure 3:
Page 1
Sportsman & Scrambler – 850/1000 2″ Rear Receiver Hitch
Receiver
PART # 101490 Hardware Kit: HK-061
Kit Components:
Qty.
Part Description
1…………….. Receiver Mount 2…………….. 1/2″-13 x 1-1/2″ Hex Bolts 1…………….. 1/2″-13 x 2-1/4″ Hex Bolt 3…………….. 1/2″-13 Hex Nylock Nuts 4…………….. 1/2″ Lock Washers 6…………….. 1/2″ SAE Flat Washers
INSTALLATION INSTRUCTIONS:
1. Place 1/2″ x 1-1/2″ bolt with flat washer though the hole (A) in the frame Figures 2 & 3. Place two 1/2″ lock washers on the 1/2″ bolt Figure 2.
2. Repeat step 1 for other side (B).
3. Place hitch into location. Put the two 1/2″ hex nylock nuts and flat washers loosely on the bolts installed in previous steps Figure 3.
4. Slide the 1/2″ x 2-1/2″ hex bolt through the OEM hitch pin hole and loosely attach using the 1/2″ hex nylock nut and flat washer Figures 1&3.
5. Tighten down all hardware.
Note: Do not exceed manufacturers
A
recommended towing capacity
Figure 1
A
Figure 2
B
©2021 Copyright Kappers Fabricating, Inc. All rights reserved
Figure 3
Page 1
