WRS-EU1-WH-MS WiFi 2 Way Touch Light Switch
Product Information:
The Smart Switch by MOES HOME is a newly designed switch that
supports the WiFi protocol and replaces traditional switches. It
offers various control modes and features multi-control association
to other smart switches through the Smart Life/Tuya App. The switch
also includes a backlight on/off function and relay status. Its
scratch-resistant glass panel makes it suitable for different
decoration styles.
Technical Parameters:
– Model: WS-EU-RF (EU version) / WS-US-RF (US version)
– Voltage: 90-250V AC, 50/60Hz
– Max. Current: 10A per gang, total 10A
– Wireless Protocol: Wi-Fi 2.4GHz + RF433MHz
Safety Information:
Risk of Electric Shock: Electricity can cause personal injury
and property damage if handled improperly. If you are not sure
about any part of these instructions, please seek professional
assistance from a qualified electrician.
Warnings:
– Turn off the power at the circuit breaker and test that power
is off before wiring.
– Please disconnect the power supply before installing or
removing the device to avoid irreversible damage or unpredictable
problems.
Installation Instructions:
Step 1: Turn off the circuit breaker and use an electrical
tester to ensure the power is off.
Step 2: Remove the old switch.
Step 3: Remove the switch and pull it away from the wall.
Identify the Line/Load Wire.
Step 4: Take pictures of the wiring.
Step 5: Remove the panel with a screwdriver. (Do not install
with electricity power on)
Step 6: Prepare to install wiring:
- A. Live wire connects to the L terminal.
- B. Neutral wire connects to the N terminal.
- C. Lamp wire connects to L1, L2, L3, L4 terminals based on the
number of gangs (1 Gang connects to L1 terminal, 2 Gang connects to
L1, L2 terminals, and so on).
Adding Devices:
1. Download the Smart Life App or MOES App (highly
recommended).
2. Complete the wiring of the switch module before pairing.
Note: The switch only supports 2.4G network. If you have
connected to a 5G network, please disconnect it and connect to a
2.4G network.
HOME, SMART MOES HOME
Instruction Manual Smart Switch
Wi-Fi+RF433 Neutral+Live
EU
US
English
Step 5
Remove the panel with screwdriver (Please don’t install with electricity power on)
See the picture below
Step 6
Prepare to install wiring A. Live wire connects ” L ” terminal B. Neutral wire connects ” N ” terminal C. Lamp wire connects ” L1,L2,L3,L4 ” terminal 1 Gang connects “L1” terminal 2 Gang connects “L1,L2” terminal 3 Gang connects “L1,L2,L3” terminal 4 Gang connects “L1,L2,L3,L4” terminal
1 Gang L1 and N line. 2 Gang L1 and N line. 3 Gang L1 and N line. 4 Gang L1 and N line.
English
5
2. Select EZ mode, tick to confirm that the indicator flashes, and click Next
Bitte scannen Sie den QR-Code hier für eine Anleitung in deutscher Sprache
Por favor escanear el código QR aquí para instrucciones en español
Veuillez scanner le QR code ici pour des instructions en français
, QR- , .
Leia o código QR aqui para obter instruções em português
English
1
1-3 Gang
N
Product Description
The newly designed smart switch supports the WiFi protocol and replaces the traditional switch with function of various control modes.Now one new smart feature as multi-control association to other smart switches is added into the Smart Life/Tuya App,together with the backlight on/off and relay status.And its scratch resistance glass panel is suitable for different decoration styles with its best value.
Safety Information
Risk of Electric Shock:Electricity can cause personal injury and property damage if handled improperly.If you are not sure about any part of these instructions,please seek professional assistance from a qualified electrician.
Technical Parameters:
Model: WS-EU-RF / WS-US-RF Voltage: 90-250V AC, 50/60Hz Max. Current: 10A/Gang; Total 10A Wireless Protocol: Wi-Fi 2.4GHz+RF433MHz
Warnings:
Turn off the power at the circuit breaker and test that power is off before wiring.
2
English
Installation
Note: Make sure that the power at the circuit breaker is off before wiring. Neutral Wire is required.Confirm the wall box contains a Neutral Wire(typically white).If the wall box don’t have a Neutral Wire,please try another location at your home or call a professional electrician to install the switch. The wire colors indicated in this manual are the usual colors and may differ in some houses. Ensure the wire conductors are securely fastened to each wire. Ensure the Wi-Fi signal is steady and normally working before wiring. If you don’t have any wiring experience,please call a professional electrician.
Step 1
Turn off the circuit breaker and use the electrical tester to test the power. Ensure the circuit breaker is off before wiring.
Step 2 Remove the old switch
Step 3 Remove the switch and pull it away from the wall. Identify Line/Load Wire(Note:The color of your wire may be different from the color shown on the manual.)
Verify power is off
We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
You may need to turn off more than one circuit breaker.
Attention:
Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.
English
3
Step 4
Take pictures of the wiring
Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.
4
English
N L4 L3 L2 L1 L
Add Devices
1 Download Smart Life App
MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life App, functional well for scene controlled by Siri, widget and scene recommendations as the fully new customized service. (Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended)
Wi-Fi link method
Complete the wiring of the switch module before pairing
Note: The switch only supports 2.4G network.If you have connected 5G network,please disconnect 5G network firstly and connect 2.4G network.
1. Scan the QR code to configure the network guide.
4 Gang
L4 L3 L L2 L1 N
Step 7
Put the switch into switch box in the wall Mount the two side screws Install the glass panel (install from up above) Finish installation
Wire channel
Cover glass panel
Wire channel
6
English
3. Enter Wi-Fi Password and click “Next”, waiting for completing the connection.
English
7
5. Add the device successfully, you can edit the name of the device to enter the device page by click “Done”
6. Click”Done”to enter the device page to enjoy your smart life with home automation.
2 Registration or Log in
Download “MOES”Application
Enter the Register/Login interface;tap “Register” to create an account by entering your phone number to get verification code and “Set password”.Choose “Log in” if you already have a Smart Life account.
3 Configure the APP to the switch Preparation: Ensure the switch has been connected with electricity;ensure your phone has been connected to Wi-Fi and is able to connect to the Internet.
Note:
The switch only supports 2.4G network.If you have connected 5G network,please disconnect 5G network firstly and connect 2.4G network.
8
English
Scan the QR code
English
Please connect the device according to the configuration process.
9
How to reset/re-pair Wi-Fi code
Long press the switch for 10 seconds until the blue indicator on the switch flashes fast and the device will start the network connection mode.
3.2 Remote radio frequency (RF)link method:
Pair and clear the RF code How to pair the RF code with APP 1 Click the setting option and choose RF remote control setup.
3.3 How to achieve multi-control association Note:Please confirm you have successfully finished the WiFi link method above for adding this switch to your Smart Life App before the association. 1.WiFi add another smart switch to the same Smart Life/Tuya App.(If there is a smart switch having been added before to the app,just go to next step.)Note:There is no need to wire the new added switch to the light,only L and N are required for wiring. 2.Then you will see two devices in the app and click the main switch(as One gang switch as below) by entering into the next operation.
2 Click the “Add” button and the indicator of the 1st Gang of the switch flashes (same as the 1st Gang button pairing state when the rest Gang buttons),then press the remote control button with 10s for pairing.
New Added Switch
4. Select the device you want to add and click “+”
Main Switch
10
English
English
11
3.Click in the upper right corner and choose”MultiControl Association, and then click “+” in the right corner
Smart Switch
Smart Switch Light Switch
Switch 2
4.Choose the switch that you want to associate to and then choose the switch button that you want to control the same light.
5.Then go back to previous page,you will see two items in the page,one is your main switch,the other is the one you associate just now. Note:Please confirm the associated switch is enabled.
6.Now you are able to control your light with two switches.Do not associate another button in the same switch for multi-control.
7.If you want to add another third or more smart switches to control your light,just repeat the steps above.And you will see the result as below when you associate another new switch.
Switch 1 Switch 2
Main Switch Associated 1 Associated 2
English
15
WARRANTY CARD
Product Information Product Name________________________________________ Product Type_________________________________________ Purchase date________________________________________ Warranty Period_______________________________________ Dealer Information_____________________________________ Customer’s Name_____________________________________ Customer Phone______________________________________ Customer Address_____________________________________ ______________________________________________________
16
English
Thank you for your support and purchase at we Moes,we are always here for your complete satisfaction,just feel free to share your great shopping experience with us.
If you have any other need,please do not hesitate to contact us first,we will try to meet
your demand.
12
English
Enter MOES Skill in Alexa APP
1. Complete product networking configuration in the App. Complete the device’s networking configuration according to the prompts in the App. Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”.
2. Configure the Amazon Echo device (If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.) Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network. Open the Alexa APP on your phone and log in tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo. Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Click “Continue” to connect to the hotspot, connect to the Amazon Echo hotspot, and return to the APP page. Click “Continue” to find and connect to your home Wi-Fi network.
English
17
AMZLAB GmbH Laubenhof 23, 45326 Essen Made In China
EVATOST CONSULTING LTD Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR Tel: +44-292-1680945 Email: [email protected]
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China Tel: +86-577-57186815 After-sale Service: [email protected]
How to reset/re-pair Wi-Fi code Press and hold the button for about 6 seconds,until the blue indicator on the switch flash fast after 3 seconds. Reset/Repair is successful.
English
13
Amazon Echo will take a few minutes to try to connect to the network. After the network connection is successful, tap “Continue”. An introduction video will appear, After the video ends, tap “Continue” to jump to the Alexa Home page. You have now completed the Amazon Echo’s configuration process
3. Key step —- Link Skill Tap on”Skills” in the Alexa App menu. Then search for “App Name”. Tap “Enable” to enable the Skill. Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey
4. Common commands
Control the device via voice commands, now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands: “Alexa, turn on <device name>” “Alexa, turn off <device name>”
18
English
14
English
SERVICE
Thank you for your trust and support to our products, we will
provide you with a two-year worry-free after-sales service (freight is not included), please do not alter this warranty service card, to safeguard your legitimate rights and interests. If you need service or have any questions, please consult the distributor or contact us. Product quality problems occur within 24 months from the date of receipt, please prepare the product and the packaging,
applying for after-sales maintenance in the site or store where
you purchase; If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair.
We have the right to refuse to provide warranty service if: 1. Products with damaged appearance, missing LOGO or
beyond the service term 2. Products that are disassembled, injured, privately repaired, modified or have missing parts 3. The circuit is burned or the data cable or power interface is
damaged 4. Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
RECYCLING INFORMATION
All products marked with the symbol for separate collection of
waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed
of at designated collection points for electrical
and electronic equipment designated by the government or local authorities. Correct disposal
and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
English
19
Maintenance Records Failure date Cause Of Issue Fault Content Principal
@moessmart @moes_smart @moes_smart
MOES.Official @moes_smart www.moes.net
CA04
20
English
English
21
22
English
English
23
24
English
MOES Smart WiFi ZigBee Smart 2/3 Way Switch Socket Thermostat Sensor
