7063 Table Lamp
Product Information
- Product Name: Balance Table Lamp
- Model Number: 7063 E26 03
- Material: Natural Wood Veneer, MDF, and Carbon Steel
- Weight: 1.75 Kg / 3.85 lbs
Product Usage Instructions
- Remove the protecting package from the pieces taking care to
not harm any parts with cutting surfaces or objects. - Lay the parts of the fixture on some horizontal surface in
order to connect them, if needed use the protecting package to
soften the surface and protect the parts from getting scratched or
harmed. - Once the protecting packages are removed, connect both parts of
the fixture: fit the dome to the metallic support through its
superior opening, aligning the holes and fastening the provided
screws (S01) to lock the dome in place. - Finish the fastening of the Philips screws located on the
swivel joints base, in order to keep it tight. - Plug the fixture into a proper outlet, using the hand switch to
turn the fixture ON/OFF. - The wooden dome which houses the light source is articulated.
Hold the dome and rotate it in order to direct the light to the
desired spot. Be careful not to exceed the swivel joint’s
articulation limit so it doesn’t break.
Note: It is recommended to use a mini LED bulb
(E26 – A15) in this fixture. Due to the dome size, a regular bulb
size would come out of the dome causing excessive light glare.
Provided Screws: S01(2)
7063 E26 03
Balance Table Lamp Balance Accord Table Lamp 7063 Natural Wood Veneer, MDF and Carbon Steel. 1,75Kg / 3,85lbs
Read carefully all the Assembly Instructions below, before starting the installation process.
01 Notice that the fixture is packed separately and dismantled in two separate parts. Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface in order to connect them, if needed use the protecting package to soften the surface and protect the parts from
getting scratched or harmed.
02 Once the protecting packages are removed, connect both
parts of the fixture: fit the dome to the metallic support
02
through it’s superior opening, alligning the holes and
fastening the provided screws (S01) to lock the dome in
place.
03
Finish the fastening of the Philips screws located on the swivel joints base, in order to keep it tight.
Once the dome is assembled and tight, the luminaire is ready USER GUIDE
Plug the fixture in a propper outlet, using the hand switch to turn the fixture ON/OFF.
The wooden dome which houses the light source is articulated. Hold the dome and rotate it in order to direct the light to the desired spot. Be careful to not exceed the swivel joint’s articulation limit so it doesn’t break.
PROVIDED SCREWS
It is recommended to use a mini LED bulb (E26 – A15) in this fixture. Due to the dome size a regular bulb size would come out of the dome causing excessive light glare.
S01(2)
