Sony MDR-Z7M2 Hi-Res Stereo Overhead Headphones
The MDR-Z7M2 headphones are quality, comfortable Hi-Res headphones with precision in sound and performance, featuring a wide frequency range that brings the brilliance out of every note. Newly developed 70mm drivers with Fibonacci Pattered Grills bring smooth ultra-high frequency characteristics, making full use of the richness of Hi-Res audio files.
Features
- Enjoy premium sound with High-Resolution Audio
Take your digital music collection to another level with High-Resolution Audio. By digitally capturing music at a higher rate than CD, High-Resolution Audio allows you to get closer to the original studio recording and enjoy your music just as the artist intended. - 70mm HD driver units delivers high quality sound
Newly developed HD driver units with a large diameter of 70mm, designed to cover most people’s ears, produce a plane wave front similar to that in a natural sound field and reproduce frequencies from 4Hz-100kHz. Every note stays precise and clear across a spacious sound stage, reproducing the emotion and energy of the original recording, with true vocal clarity and precise bass response. - Fibonacci-patterned grill for smooth ultra-highs
Fibonacci-patterned grill inherited from MDR-Z1R, reproduces the intended sound properties smoothly. It is made of stiff resin to achieve both thinness and strength and minimize sound damping from the grill at ultra high frequencies. - Aluminum-coated LCP diaphragm for more precision
An aluminum-coated liquid crystal polymer diaphragm gives a more consistent and precise sound across the entire frequency range. Combining aluminum and LCP, material-specific resonance is canceled and delivers natural sound with low coloration. - 225% bigger Dynamic Neodymium Magnet
With a newly developed magnetic circuit and bigger magnet, double the size of the MDR-Z7, the MDR-Z7M2 establishes more driving power and a fast response to high resolution signals, which results in sharp clarity of sound. - 4.4mm balanced cable connection
Enjoy clear, precise and dynamic sound with a 4.4mm balanced connection cable, which separates left and right sound signals and reduces noise from the output signal. - Silver-coated oxygen free copper cable
Silver-coated oxygen-free copper cables, enables to minimize resistance and signal-transmission loss. The result is less sound degradation, finer detail and smoother treble sounds.
Specifications
| General Features(Headphone) | |
|
CableLength | Headphone cable (Approx. 118 1/8 in (3 m), silver-coated OFC strands, Gold- plated stereo mini plug), Balanced-connection headphone cable (Approx. 47 1/4 in (1.2 m), silvercoated OFC strands, L-shaped gold plated balanced standard plug) |
| Cable Type | Detachable Y type |
| Diaphragm | Aluminum-coated LCP diaphragm |
| Driver Unit | 70 mm, dome type (CCAW Voice Coil) |
| Frequency Response | 4 Hz – 100,000 Hz (JEITA) |
| Headphone Type | Closed, dynamic (circum-aural) |
| Impedance | 56 Ω at 1 kHz |
| Magnet | Neodymium |
| Plug | Headphone cable (Gold-plated stereo mini plug), Balanced-connection headphone cable (L-shaped gold plated balanced standard plug) |
| Power Handling Capacity | 2,000 mW (IEC) |
| Sensitivity | 98 dB/mW |
| Wearing Style | Circum-aural |
| Weights (Approx.) *excl.cable erights | 340g |
2018 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and the Sony logo are registered trademarks of Sony Corporation. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.
Updated: October 25, 2018
FAQS
For sure! You can use these headphones with the NW-WM1Z Walkman via a wired connection. …
the unit is supplied with both a standard headphone cable and a balanced-connection headphone cable. It will depend on which connection your MP3 player supports.
No, they do not have Active Noise Cancelling
Bass is just right. Not overwhelming
Yes
I use the WM1A with the Z7M2. They are perfect together.
From what I’ve heard, they are replaceable and there is a screw under the pad you need to unscrew to remove them.
Yes it does
The supplied unimatch plug adaptor is intended for use with the headphone cable only. It cannot be used with a balanced-connection headphone cable.
Yes, these headphones support L-shaped balanced standard plug.
Stronger bass
The manufacturer warranty is only valid from where the product was purchased.
Yes just plug in. If you want more sound and volume add a DAC
For sure! You can use these headphones with the NW-WM1Z Walkman via a wired connection.
the unit is supplied with both a standard headphone cable and a balanced-connection headphone cable. It will depend on which connection your MP3 player supports.
