B-Air BA-FT-20X Multipurpose High-Velocity Fan
SAFETY INFORMATION WARNING
- Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet.
- Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
- Unplug the fan when it is not in use.
- Do not unplug the fan by holding the cable cord. Unplug by holding the plug.
- Do not use the fan when there is damage to the cable cord or plug.
- Do not use the fan with extension cord.
- Do not use the fan close to the fires.
- Do not insert your hand or other objects into the guard or the movable parts.
- To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- If the supply cord is damaged, it has to be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
- Do not use this fan outdoor.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth and then wipe off the surfaces of the fan. In order to remove the dust from the grill, use a vacuum cleaner or remove the front grill by removing the securing screw on the edge of the grill with a screwdriver. After cleaning, remount the grill. After doing this, fasten the securing screw on the edge of the grill.
ASSEMBLY INSTRUCTIONS
- Press the button on the base.
- Insert the fan into the bracket until the button pop-up from the hole.
OPERATING INSTRUCTIONS
- Place the fan on a safe, flat surface where it can not fall or be pulled by the cord.
- Select desired direction of air flow by tilting the fan grill upward or downward.
- Plug unit into electrical outlet.
- Select preferred speed (1-High,2-Med,3-Low) by rotating the switch on the back of the unit.
- Always turn off (0-off) and unplug fan after using.
CAUTION
- Unplug the fan from the socket and clean it with a soft cloth.
- Do not immerse the fan.
- Fit the guard onto fan before starting up the fan.
- This fan is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the fan by a person responsible for their safety. Supervise children to ensure they do not play with the fan.
Specification
FAQs
High velocity fans are designed to move more air at a higher velocity. This means that they are better for cooling a room or area.
You can clean your high velocity fan by using a damp cloth and wiping down the surface of the fan. You should not use any water to clean metal surfaces. High velocity fans are designed to move more air at a higher velocity. This means that they are better for cooling a room or area.
You can clean your high velocity fan by using a damp cloth and wiping down the surface of the fan. You should not use any water to clean metal surfaces. The high velocity fans are designed to move more air at a higher velocity than regular fans, therefore they are better for cooling a room or area. However, if you want to move air in another direction, you will need to purchase an oscillating fan that is designed to be used in another direction as well as up and down.
The size of the high-velocity fan you choose will depend on how much space you want cooled and how much money you want to spend on your new appliance. If you have a large room, it is recommended that you purchase an appliance that has more blades and is larger in size than one with fewer blades and is smaller in size. If you have a small room, it is recommended that you purchase an appliance with fewer blades and is smaller in size than one with more blades and is larger in size.
The mounting bracket is the only component that has to be completed. Everything else, however, is assembled.
The manufacturer claims 4650 cfm for the 20. I’m conducting a long-term experiment to compare this fan against an Air King of the same size because I like it. Although the B-Air moves air, don’t anticipate absolute silence.
Fans at higher speeds are noisier than those with lower speeds, regardless of the bearing they utilise. Comparable fans create similar noise levels while operating at low speeds.
Make sure the fan you choose has adequate power to cool the room. Depending on how big or tiny the space is that you wish to cool, use a high-velocity fan. There are many airflow rates on these incredibly powerful fans. Choose a fan with three speeds for more control over the volume of air circulation.
The higher-powered motors of the high-velocity fan, which can see beyond roughly 60 to 80 cm away, range from 60 to 120 Watts.
Large volumes of air are moved quickly using high velocity fans. They are frequently used for cooling, but they can also be used to remove odours, dry out flooded regions, and for other similar things. They come in a range of sizes, mounting options, and even a few different forms because of their numerous functions.
High velocity cooling fans can be used to cool down garages, living rooms, and outdoor patios in addition to creating strong air circulation in commercial and industrial environments.
HVLS fans have a range from a minimum speed of 71 RPM to a maximum speed of 200 RPM. 230 RPM is the maximum speed at which a residential fan may spin. The main distinction between HVLS and residential fans is airflow.
