Polibi CB-2PLGLS-13 Round Arm Linen Straight Sofas Living Room Set
WARNING
- This product has been designed for seating one (1) average aduit. To prevent injury and damage to this unit, PROHIBIT jumping on it.
- This product is designed for home Use and not intended for commercial use.
- Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
- Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
PARTS
INSTALLATION INSTRUCTIONS FOR 1 SEATER SOFA
- Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean fat surface.
- Step 2: Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
- Step 3: . Carefully lift and tum assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctly in place.
- Step 4: Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
- Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place.
- Step 6: Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
INSTALLATION INSTRUCTIONS FOR 3 SEATER SOFA
WARNING
- This product has been designed for seating one (1) average aduit. To prevent injury and damage to this unit, PROHIBIT jumping on it.
- This product is designed for home Use and not intended for commercial use.
- Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
- Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
PARTS
- Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean fat surface.
- Step 2: Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
- Step 3: . Carefully lift and tum assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctivity in place.
- Step 4: Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
- Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place.
- Step 6: Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
