Polibi Cb-2plgls-23 57.5 Inch And 79.9 Inch W Round Arm Linen Straight Sofas Instruction Manual

ASSEMBLY INSTRUCTIONS
CB-2PLGLS-23 57.5 Inch and 79.9 Inch W Round Arm Linen Straight Sofas

If you have any questions about the product, please contact the email: [email protected] 

WARNING

• This product has been designed for seating two (2) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
• This product is designed for home use and not intended for commercial use.
• Children under the age of 5, small infants, and babies should not sleep alone on this product for safety reasons.
• Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
• THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

PARTS 

Step 1: Carefully unpack parts/hardware from the box and store of seat body, place on a clean flat surface. Step 2: Place both arms as shown below, and secure two legs into pre-drilled holes on the bottom of the arms.
Please avoid overtightening. Step 3: Carefully lift and turn assembled arms onto their legs. Insert seat body metal plates to both arms as shown below.
Ensure it is correctly in place. Step 4: Insert backrest with earpiece metal plates to both arms as shown below. Ensuring is correctly in place. Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place. Step 6: Finally, stretch and pull down the rear cover evenly before securing the velcro strap to the seat base. Repeat if necessary for a better fit.

ASSEMBLY INSTRUCTIONS

• This product has been designed for seating three (3) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
• This product is designed for home use and not intended for commercial use.
• Children under the age of 5, small infants, and babies should not sleep alone on this product for safety reasons.
• Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
• THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

PARTS

Step 1: Carefully unpack parts/hardware from the box and store of seat body, place on a clean flat surface. Step 2: Place both arms as shown below, and secure two legs into pre-drilled holes on the bottom of the arms.
Please avoid overtightening. Step 3: Carefully lift and turn assembled arms onto their legs. Insert seat body metal plates to both arms as shown below.
Ensure it is correctly in place.Step 4: Insert backrest with earpiece metal plates to both arms as shown below. Ensuring is correctly in place. Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place. Step 6: Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.