F9 Robot Vacuum Mop
Dreame Robot Vacuum-Mop F9 User Manual
Safety Information
Only for navigation and positioning purposes, the camera of the
vacuum-mop will collect individuals in the surroundings within the
range of the viewing angles when it is cleaning. Please be assured
that all your personal information will be protected by the data
encryption technology.
Usage Restrictions
- The vacuum-mop is only for navigation and positioning
purposes.
Product Overview
The Dreame Robot Vacuum-Mop F9 comes with the following
accessories:
- Charging Dock
- Cleaning Tool
- Power Cord
- Water Tank
- Mop Pad
- Side Brush
The vacuum-mop is equipped with various sensors and
components:
- Visual Navigation Sensor
- Cover latch
- Reset button
- Wi-Fi Indicator
- Cleaning Tool Air Outlet/Speaker
- Cliff Sensor
- Omnidirectional Wheel
- Charging Contacts
- Optical Sensor
- Main Wheels
- Main Brush
- Brush Guard Clips
- Collision Buffer
- Infrared Deceleration Sensor
- Dust Bin
- Bin Clip
- Bin Cover
- Filter
- Mopping module
- Signaling Area
- Power Port
- Water Tank Stopper
- Mop Pad Attaching Area
Preparation
- Remove the protective film.
- Install the side brush.
- Place the charging dock on a level ground against the wall and
connect it to a power outlet. - Ensure there is a clear space of more than 1.5 meters in front
of the vacuum-mop and charging dock. - Make sure the vacuum-mop and charging dock are within the range
of Wi-Fi. - Do not block the signaling area of the vacuum-mop, as this may
hinder it from returning to the charging dock. - Place the robot onto the charging dock to recharge.
Battery Level Indicator
- White: Battery level is more than 15%
- Orange: Battery level is less than 15%
Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app. Follow
these steps to connect:
- Scan the QR code to download and install the app. If the app is
already installed, you will be directed to the connection setup
page. - Alternatively, search for Mi Home/Xiaomi Home in the app store
to download and install it. - To reset Wi-Fi, simultaneously press and hold the buttons
[button1] and [button2] until you hear a voice saying “Waiting for
the network configuration.” Once the Wi-Fi indicator is slowly
blinking, the Wi-Fi has been successfully reset. - Open the Mi Home/Xiaomi Home app, tap “+” on the upper right,
and follow the prompts to add your device.
Dreame Robot Vacuum-Mop F9 User Manual
Read this manual carefully before use, and retain it for future reference.
Safety Information
Only for navigation and positioning purposes, the camera of the vacuum-mop will collect individuals in the surroundings within the range of the viewing angles when it is cleaning. Please be assured that all your personal information will be protected by the data encryption technology.
Usage Restrictions
This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor surfaces, or in a commercial or industrial setting. Do not use the vacuum-mop in an area suspended above ground level without a protective barrier. Do not use the vacuum-mop at an ambient temperature above 40° C or below 0° C or on a floor with liquids or sticky substances. Pick up any cables from the floor before using the vacuum-mop to prevent it from dragging them while cleaning. Remove fragile or small items from the floor to prevent the vacuum-mop from bumping into and damaging them. This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning and maintenance shall not be made by children without supervision. Children shall not play with this product. Ensure children and pets are kept at a safe distance from the vacuum-mop while it is operating. Keep the brush cleaning tool out of reach of children. Do not place children, pets, or any item on top of the vacuum-mop regardless of whether it is stationary or moving. Keep hair, fingers, and other body parts away from the suction opening of the vacuum-mops. Do not use the vacuum-mop to clean any burning substances. Do not vacuum up hard or sharp objects. Make sure the vacuum-mop is turned off and the charging dock is unplugged before cleaning or performing maintenance. Do not wipe any part of this product using a wet cloth or any liquids. Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or damage arising from improper use of this product.
1
Safety Information
Batteries and Charging
Do not use any third-party battery, charger, or charging dock. Use only with RCS0 supply unit. Do not attempt to disassemble, repair, or modify the battery or charging dock on your own. Do not place the charging dock near a heat source. Do not use a wet cloth or wet hands to wipe or clean the dock’s charging contacts. Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an appropriate recycling facility. If the power cord becomes damaged or broken, stop using it immediately and contact after-sales service. Make sure the vacuum-mop is turned off when being transported and kept in its original packaging if possible. If the vacuum-mop will not be used for an extended period, fully charge it, then turn it off and store in a cool, dry place. Recharge the vacuum-mop at least once every 3 months to avoid over-discharging the battery. This product contains batteries that can only be replaced by qualified technicians or after-sales service.
Hereby, Dreame Technology (Tianjin) Limited declares that the radio equipment type RVS5-WH0 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.dreame.tech
2
Product Overview
Accessories
Charging Dock
Cleaning Tool
Power Cord
Water Tank
Mop Pad
Side Brush
Note: The illustrations in this manual are for reference only, please refer to the actual product for the actual appearance. 3
Product Overview
Vacuum-Mop
4
Power/Clean Button Press and hold for 3 seconds Press to start cleaning after the vacuum-mop is powered on
Status Indicator White: Cleaning, or cleanup is completed Blinking white: Cleaning paused Blinking blue: Connecting to network Blinking orange: Error
Spot/Dock Button Press to send vacuum-mop back to charging dock Press and hold for 3 seconds to start Spot Clean mode Note: Press any button to pause while the vacuum-mop is cleaning, returning to dock, or in Spot Clean mode.
Visual Navigation Sensor
Cover latch
Product Overview
Vacuum-Mop
Reset button Press and hold to restore factory settings Wi-Fi Indicator Blinking slowly: To be connected Blinking quickly: Connecting On: Wi-Fi connected Cleaning Tool Air Outlet/Speaker
Vacuum-mop and Sensors
Cliff Sensor
Omnidirectional Wheel Charging Contacts Optical Sensor Side Brush Main Wheels Main Brush Brush Guard Clips
Collision Buffer
Infrared Deceleration Sensor 5
Product Overview
Dust Bin
Bin Clip Bin Cover Filter
Mopping module
Charging Dock
Signaling Area Charging Contacts Power Port
6
Water Tank Water Tank Stopper
Mop Pad Attaching Area
Preparation
1. Remove the protective film
2. Install the side brush
3. Place the charging dock on the level ground against wall and connect to a power outlet
>0.5m
Note
>1.5m
>0.5m
· Make sure there is a distance of 0.5 meters or more on either side of the charging dock, and
more than 1.5 meters in front of it.
· Tidy up any loose cord which could accidentally move or unplug the charging dock.
· To ensure you can well connect to the vacuum-mop with your phone, make sure the
vacuum-mop and charging dock are in the range of Wi-Fi.
· Do not place the charging dock in an area with direct sunlight or where other objects could
block its signaling area, as this may hinder the vacuum-mop from returning to the charging
dock.
4. Place the robot onto the charging dock to recharge
Battery Level Indicator
White: Battery level is more than 15%
6h
Orange: Battery level is less than 15%
Note · Full charge before first use. · Don’t install the mopping module while charging.
7
Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app Store to download and install it.
Reset Wi-Fi
Simultaneously press and hold the buttons and until you hear a voice saying “Waiting for the network configuration”. Once the Wi-Fi indicator is slowly blinking, the Wi-Fi has been successfully reset.
Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
8
How to Use
1. Turn On/Off
Press and hold the button to turn on the vacuum-mop. Once the power indicator turns solid white, the vacuum-mop is in standby mode. To turn off the vacuum-mop, press and hold the button while the vacuum-mop is stationary. Turning off the vacuum-mop will end the current cleaning task.
2. Start Cleaning
Upon activation, the vacuum-mop will methodically clean each room in an S-shape pattern, then finish by cleaning along edges and walls to ensure a thorough job. When the vacuum-mop is done cleaning, it will automatically return to the charging dock to recharge.
Note: · Please fully charge and start from the charging dock before cleaning. Don’t move the
robot and charging dock when the robot is working. · If the battery is too low , the robot will automatically return to the dock to charge.It
will resume unfinished cleaning tasks after charging to the appropriate power.
3. Cleaning Mode
Four cleaning modes are available in the app: Quiet, Standard, Strong and Turbo. The default mode is Standard.
4. Pausing/Sleep Mode
· Press any button to pause the vacuum-mop during cleaning. · The vacuum-mop will automatically enter sleep mode after 10 minutes of
inactivity, then the power and charging indicators will go off. To wake up the vacuum-mop, press any button. Note: When the vacuum-mop is paused, placing it onto the charging dock will end the current cleaning task.
5. Spot Clean mode
When the vacuum-mop is in standby mode or paused, press and hold the button for 3 seconds to start Spot Clean mode. In this mode, it will clean a square-shaped area of 1.5 ×1.5 meters directly around the vacuum-mop. When the spot cleaning is done, the vacuum-mop will automatically return to its original location and shut off. Note: Activating Spot Clean mode will end the current cleaning task of the vacuummop.
9
How to Use
6. Do Not Disturb Mode
Do Not Disturb mode prevents the vacuum-mop from automatically starting cleaning tasks, and the power indicator remains off. You can enable Do Not Disturb or modify its hours in the app. Note: · Scheduled cleanups will still be carried out during the DND period. · The vacuum-mop will continue cleaning after this period ends.
7. Scheduled Cleaning
You can schedule cleaning time in the app. The vacuum-mop will automatically start cleaning at the designated time and then return to the charging dock to recharge when the cleaning is done.
8. Advanced Function
The app can be used to set up advanced functions such as selected room cleaning, zone cleaning, forbidden area / virtual wall, etc. Note: · Map Saving mode switched on before this functions can be used. After completing
several cleanups under different lighting conditions, a full map will be created. When starting a cleanup, please open all the doors in your home to ensure the integrity of the map. · Do not rely on forbidden areas and virtual walls to isolate dangerous areas. · Moving the robot manually or making significant changes to the home environment may cause the loss of virtual walls.
Select Room A
Forbidden Area / Virtual Wall C
D B
10
How to Use
9. Use the mopping function
It is recommended that all floors are vacuumed at least three times before the first mopping session to achieve better cleaning effect.
Install the mop pad: Dampen the mop pad and wring out excess water. Slide the pad all the way into the slot of the water tank until it is securely in place.
Install the mopping module: Align the mopping module as indicated by the arrow, then slide it into the back of the vacuum until it clicks into place.
Fill the water tank: Open the water tank lid, fill the tank with water, then securely close the lid.
Note: · Only use the mopping module when someone is at home. · To prevent the vacuum from entering carpeted areas, objects may be used. · Use the app to adjust the water flow as required.
Press the two side clips inwards and slide the water tank backwards to separate it from the robot.
Note: Do not use non-designated detergents or disinfectants.
Note: When the vacuum-mop is charging or not in use, remove the mopping module, pour out all remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors.
11
FAQ
Problem Type Vacuum-mop does not turn on
Vacuum-mop does not recharge
Vacuum-mop does not return to charging dock Vacuum-mop is malfunctioning Vacuum-mop makes a strange noise Vacuum-mop no longer cleans efficiently or leaves dust behind
Vacuum-mop cannot connect to Wi-Fi
Solution
Battery level is low. Recharge the vacuum-mop at the charging dock, then try again. The ambient temperature is too low (below 0°C) or too high (above 50°C). The operating temperature of the vacuum-mop is 0°C to 40°C.
The charging dock is not receiving power. Please confirm that both ends of the power cord are plugged in correctly. Poor contact, clean the charging contacts of the charging dock and the vacuum-mop.
There are too many obstructions around the charging dock. Place the charging dock in a more open area. Please clean the dock’s signaling area.
Turn off the vacuum-mop and then reactivate it.
A foreign object might be caught in the brush, side brush, or one of the main wheels. Stop the vacuum-mop and remove any debris.
The dust bin is full. Please clean it. The filter is blocked. Please clean it. A foreign object is caught in the brush. Please clean it.
Wi-Fi signal is weak. Make sure the vacuum-mop is in an area with good Wi-Fi coverage. There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the app, then try reconnecting.
12
FAQ
Problem Type
Vacuum-mop does not perform scheduled cleaning.
Does leaving the vacuum-mop on the charging dock consume power if it’s already charged?
Does the vacuum-mop need to be fully charged for 16 hours the first three times it is used?
No water comes out of the mopping module, or only a little bit comes out.
Too much water comes out of the mopping module
Vacuum-mop doesn’t resume cleaning after charging
Vacuum-mop doesn’t return to charging dock after being moved
Solution
Vacuum-mop has low battery. Scheduled cleaning will not start unless the vacuum-mop has at least 15% battery left .
Leaving the vacuum-mop on the charging dock after it’s fully charged consumes very little electricity and helps maintain optimal battery performance.
Lithium batteries do not suffer from memory effects, so it is not necessary to wait 16 hours after fully charging the vacuum-mop before using it.
Confirm that the water tank is filled with water, and clean the mop pad if necessary. Make sure the mop pad is installed correctly according to the user manual.
Make sure the water tank lid is securely closed.
Make sure the vacuum-mop is not set to Do Not Disturb mode, which will prevent it from resuming cleaning. The vacuum-mop does not resume cleaning when it is manually recharged or placed onto the charging dock.
Moving the vacuum-mop may cause it to re-position itself or re-map its surroundings. If the vacuum-mop is too far from the charging dock, it might not be able to automatically return on its own, in which case you need to manually place the vacuum-mop onto the charging dock.
13
Specifications
Vacuum-Mop
Model Battery Wireless Connectivity Rated Voltage Rated Power Operation Frequency Maximum Output Power
RVS5-WH0 14.4 V 5200 mAh(Rated Capacity) Wi-Fi IEEE 802.11b/g/n 2.4 GHz 14.4V 40W 2400-2483.5 MHz
20 dBm
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
Charging Dock
Model Rated Input Rated Output
RCS0 100-240 V ~ 50/60 Hz 0.5 A 19.8 V 1 A
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
14
For further information, please go to www.dreame.tech Manufactured by: Dreame Technology )Tianjin( Limited
Made in China
