Emser F20steras2447p Sterlina Ii Asphalt Polished Porcelain Marble Look Floor And Wall Instructions

F20STERAS2447P Sterlina II Asphalt Polished Porcelain Marble Look Floor and Wall

Product Information

The Sterlina IITM is a glazed porcelain tile that beautifully
combines the timeless look of marble with the urban touch of
concrete. It is available in both matte and polished finishes and
comes in seven different colorways to achieve any desired look. The
Sterlina IITM series offers a range of sizes, including 24×24,
24×47, 12×24, 8×10, 12×12 mesh, and 3×12 floor SBN. The thickness
of the tiles varies between 8.8mm and 10mm depending on the
size.

The Sterlina IITM series is designed for residential indoor use
and offers excellent abrasion resistance, breaking strength, and
chemical resistance. The water absorption rate is 0.55 for matte
tiles and it has a scratch hardness rating of 7 on the MOHS scale.
The shade variation rating ensures a consistent and uniform
appearance across the tiles.

Product Usage Instructions

1. Select the desired color and finish (matte or polished) of the
   Sterlina IITM tiles.
2. Measure the area where the tiles will be installed and
   determine the quantity needed.
3. Prepare the surface by ensuring it is clean, dry, and
   level.
4. If necessary, apply a suitable primer or underlayment to the
   surface before tiling.
5. Start laying the tiles from one corner of the room, working
   towards the opposite side.
6. Apply a thin layer of tile adhesive or mortar to the surface
   using a trowel.
7. Place each tile onto the adhesive, pressing firmly to ensure
   good adhesion.
8. Use tile spacers to maintain consistent grout joints.
9. Continue laying the tiles, ensuring they are properly aligned
   and leveled.
10. Allow the adhesive to dry according to the manufacturer’s
    instructions.
11. Once the tiles are securely in place, apply grout to the joints
    using a grout float.
12. Remove any excess grout from the tile surface using a damp
    sponge.
13. Allow the grout to cure as per the manufacturer’s
    recommendations.
14. Clean and maintain the Sterlina IITM tiles regularly according
    to the manufacturer’s instructions to preserve their appearance and
    longevity.

Please note that for running bond/brick joint patterns with
tiles larger than 18 inches, the running bond offset should not
exceed 33% unless specified by the tile manufacturer, specifier,
and owner approval.

Sterlina IITM beautifully unifies the look of timeless marble with the urban touch of concrete. Available in matte and polished finish and seven colorways to achieve any desired look.

STERLINA IITM
Glazed Porcelain

Sterlina IITM | Asphalt

www.emser.com 2

STERLINATM / STERLINA IITM

7 Colors | 4 Sizes

White

Silver

Ivory

Gray

Dove

RESIDENTIAL

INDOOR

Henna

Asphalt

Henna only available in 12″x24″ size.
Hex size is part of SterlinaTM Series. Some colors coordinate but may not be an exact match with other sizes. All other sizes are part of the Sterlina IITM Series.

Sizes

Thickness
Faces
Finish
Edge Grout Joint Recommendation

24″x24″
23.62″x23.62″
8.8mm
8 Matte & Polished Rectified
1/8″

24″x47″
23.62″x47.24″
10mm
5 Matte & Polished Rectified
1/8″

12″x24″
11.81″x23.62″
8.8mm
7 Matte & Polished Rectified
1/8″

8″x10″
8.46″x9.84″
9mm Check Website Matte
Pressed Check Website

12″x12″ Mesh
11.69″x11.69″
8.8mm

3″x12″
Floor SBN
8.8mm

N/A Matte Cut

N/A
Matte & Polished
Cut/Round

1/8″

1/8″

Abrasion Resistance Breaking Strength Chemical Resistance Water Absorption

Testing C1027

C648

C650

C373

DCOF ANSI A137.1

Scratch Hardness MOHS

Shade Variation Rating

Product and Installation Details | ANSI A108.02 Section 4.3.8.2 – For running bond/brick joing patterns utilizing tiles (square or rectangular) where the side being offset is greater than 18″ (nominal dimension), the running bond offset will be a maximum of 33% unless otherwise specified by the tile manufacturer. If an offset greater than 33% is specified, specifier and owner must approve mock-up and lippage.

Results* III

>350 lbf

Resistant

<0.5%

Sustainability Attributes
· Red List Free · Health Product Declaration (HPD) provided upon request · Product Packaging is 100% recyclable

· VOC Free

*For more information visit www.emser.com. Always consult a professional for proper usage and installation.

>0.55 (Matte)

7 (Matte)

<0.42 (Polished) Min 5 (Polished)

V2

Recommended 33% Offset*
Rev. 2023-04

References

• Emser Tile - Tile and Natural Stone