4CHR3 4 Gang WiFi Smart Switch
Product Information
The SONOFF TECHNOLOGIES CO., LTD. product is available in two
models: 4CHR3 and 4CHPROR3. The input voltage for 4CHR3 is 100-240V
AC, and for 4CHPROR3, it is 100-240V AC or DC 9-23V. The maximum
load for 4CHR3 is 10A/2200W/Gang and 16A/3500W/Total, while for
4CHPROR3, it is 10A/2200W/Gang and 40A/8800W/Total. The device
operates on IEEE 802.11 b/g/n 2.4GHz Wi-Fi and is compatible with
Android and iOS operating systems. The working temperature range is
-10~40°C, and the device dimensions are 145x90x34mm.
Product Usage Instructions
- Consult a dealer or qualified professional for help installing
and repairing the product to avoid electric shocks. - Follow the wiring instructions provided in the manual to
connect the device to your light fixture or socket. Ensure all
wires are connected correctly. - Download the eWeLink app on your Android or iOS device.
- Power on the device. It will enter quick pairing mode during
the first use, where the Wi-Fi LED indicator changes in a cycle of
two short and one long flash and release. To enter this mode again,
long press any pairing button for about 5s until the Wi-Fi LED
indicator changes in a cycle of two short and one long flash and
release. - Add the device by tapping + and selecting Quick Pairing on the
app. Follow the prompts provided on the app. If you fail to enter
quick pairing mode, try compatible pairing mode by long pressing
any pairing button for 5s until the Wi-Fi LED indicator changes in
a cycle of two short flashes and one long flash and release. Then,
select Compatible Pairing Mode on the app and enter the Wi-Fi SSID
and password to complete the pairing process.
Note: The 4CHR3 model does not support the remote controller
with 433.92MHz.
SONOFF TECHNOLOGIES CO., LTD.
Operating Instruction
1. Power off
ON
OFF
ON
OFF
ON
OFF
ON
OFF
English
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing!
2. Wiring instruction Light fixture wiring instruction:
4CHR3
L2 Out L1 Out
N In 100-240V AC
L In
4CHPROR3 (DC Input)
L Out L Out
DC 9-23V
L In 100-240V AC
N In
8
SONOFF TECHNOLOGIES CO., LTD. 4CHPROR3 (AC Input)
English
L Out L Out
L In 100-240V AC
N In
Socket wiring instruction (Don’t need to connect if no ground wire): 4CHR3
L2 Out L1 Out
N In 100-240V AC
L In
G
4CHPROR3 (DC Input)
L Out L Out
DC 9-23V
N In 100-240V AC
L In G
9
SONOFF TECHNOLOGIES CO., LTD. 4CHPROR3 (AC Input)
English
L Out L Out
100-240V AC
N In
L In
G
Make sure all wires are connected correctly.
3. Download the eWeLink APP eWeLink
4. Power on
eWeLink
AndroidTM & iOS
After powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press any pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
10
SONOFF TECHNOLOGIES CO., LTD. 5. Add the device
Add Device
Quick Pairing
WIFI devices can be added in this mo de(make sure the device is in pairing mode).
Scan QR code
GSM devices and devices with QR co de can be added in this mode.
Sound Pairing Add device in this mode if your devic e support this feature.
English
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair. 1 Long press any pairing button for 5s until the Wi-Fi LED indicator changes in a
cycle of two short flashes and one long flash and release. Long press any pairing button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode .
2 Tap “+” and select ” Compatible Pairing Mode ” on APP. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
Specifications
Model Input
Max. Load RF Wi-Fi Operating systems Working temperature Material Dimension
4CHR3/4CHPROR3 4CHR3: 100-240V AC 50/60Hz 4CHPROR3: 100-240V AC 50/60Hz (DC: 9-23V) 4CHR3: 10A/2200W/Gang 16A/3500W/Total 4CHPROR3: 10A/2200W/Gang 40A/8800W/Total
433.92MHz IEEE 802.11 b/g/n 2.4GHz
Android & iOS -10~40 PC V0 145x90x34mm
4CHR3 does not support the remote controller with 433.92MHz. 11
SONOFF TECHNOLOGIES CO., LTD.
Product Introduction
4CHR3
L1/L2/L3/L4 Pairing button Manual switch
English
L1/L2/L3/L4 On/Off LED indicator(Red) Wi-Fi LED indicator(Blue)
R1/R2/R3/R4 Pairing button Manual switch
4CHPROR3
R1/R2/R3/R4 On/Off LED indicator(Red)
Wi-Fi LED indicator(Blue)
DC input AC input
The device weight is less than 1 kg. The installation height of less than 2 m is recommended.
Wi-Fi LED indicator status instruction
Wi-Fi LED indicator status Flashes (one long and two short) Keeps on Flashes quickly Flashes quickly once Flashes quickly twice Flashes quickly three times
Status instruction Quick Pairing Mode Device is connected successfully Compatible Pairing Mode Unable to discover the router Connect to the router but fail to connect to Wi-Fi Upgrading
12
SONOFF TECHNOLOGIES CO., LTD.
English
Features
This device is a 4-Gang Wi-Fi smart switch with self-locking, interlock and inching that allow you to remotely turn on/off connected devices via your smartphone, schedule on or off, share to your family to control together.
Remote Control
Single/Countdown Timing
Voice Control
Share Control
Smart Scene
Self-locking
Interlock
Inching
433MHz Remote Control
Power-on State
Camera Linking
LAN Control
RF Remote Controller Pairing
The 4CHPROR3 supports the remote controller with 433.92MHz frequency brand to turn on/off, and each channel can learn it independently, which is local short-range wireless control not Wi-Fi control.
Pairing Method:
Long press the channel switch button to be paired for 3s until the Wi-Fi LED indicator turns red and “quickly flashes once” and release, then short press the button to be paired on the remote control. If the Wi-Fi LED indicator turns red and “quickly flashes once”, it indicates that the pairing is successful.
Clearing Method: Long press the channel switch button to be cleared for 5s until the Wi-Fi LED indicator turns red and “quickly flashes twice” and release, then short press the button to be cleared on the remote control. If the Wi-Fi LED indicator turns red and “quickly flashes once”, it indicates that the code is cleared.
13
SONOFF TECHNOLOGIES CO., LTD.
English
Switch Network
If you need to change the network,Long press the any pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, , then the device enters quick pairing mode and you can pair again.
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory setting.
Common Problems
Q: Why my device stays “Offline”? A: The newly added device needs 1 2mins to connect Wi-Fi and network. If it stays
offline for a long time, please judge these problems by the blue Wi-Fi indicator status: 1. The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi: Maybe you have entered a wrong Wi-Fi password. Maybe there’s too much distance between the switch your router or the
environment causes interference, consider getting close to the router. If failed, please add it again. The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network. Maybe the MAC address filtering is open. Please turn it off. If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again. 2. Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If the network is normal, try to turn off the power to restart the switch.
14
