Inwin Ego Ae120 Ultimate Rgb Led Fan User Manual

InWin EGO AE120 Ultimate RGB LED Fan User Manual

Package Content

• Screws x 4
  
• 6-6 pin short connecting wire x 1
  
• 6-6 pin long connecting wire x 1
  
• EGO fan x 1
  

Installation Guide

1. Please make sure the power is off.
   Install the fans in your PC case, and screw it in the designated areas.
2. Please use the provided screws for fans and radiators to assemble on the computer. The 6-6 pin long and short connecting wires are provided to further plan your build as a complementary item to other EGO/Aurora involved builds.
   

EGO fans can be connected to each other through the 6-6pin connecting wires, hence the installation above is a suggestion.

The single pack can only be synced with an addressable RGB motherboard. Please make sure your motherboard supports addressable RGB lighting.

Troubleshooting

If your fan does not operate properly, please follow the instructions below:

1. Please check your system’s power.
2. Please make sure all the connectors are connected properly.

Important Notes

1. Please install the fan by following our instructions.
2. When storing the fan, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.
3. Please do not put anything in the impeller.
4. Please do not modify the wires or the connectors provided by InWin.
5. Please do not touch the fan blades when the fan is in operation.
6. Please only use your fan in a computer case.
7. Please keep this product away from any liquids.

Specifications

InWin EGO Fans

• Our products comply with RoHS regulation.
• Specifications may vary based on different regions.
• Extra fee for optional parts.

Contemporary & Innovative 
www.in-win.com