Jula Bluewear Rough Workwear Instruction Manual

Bluewater Rough Workwear
Instruction Manual
Size: 9
Size range: 8-11
Item no. 016553
Jula AB
www.jula.com
Box 363, SE-532 24 Skara
Made in Pakistan
Notified body/Jednostka notyfikowana No. 2474:
MIRTA-KONTROL d.0.0.,Javorinska 3,
HR-10040 Zagreb-Dubrava, Croatia.
These gloves bear CE marking to demonstrate compliance with Regulation (EU) 2016/425
Personal Protective Equipment and meet the standards EN ISO 21420:2020,
EN 388:2016+A1:2018, EN 511:2006.

Bluewear Rough Workwear

WARNING!

WARNING! Gloves shall not be worn when there is a risk of entanglement by moving parts of the machine.
The durability of the gloves depends on how they are used.
Always check that the gloves are in good condition before using them. Keep the gloves in a clean, dry, and ventilated place, free from moisture, dirt, mold, and sunlight. Do not leave the gloves in contaminated condition if they are going to be reused. Remove as much as possible of any contamination from the gloves after using them. Dispose of in accordance with current legislation. The materials used are not known to cause allergies. If any reaction occurs discontinue use.

EU DECLARATION OF CONFORMITY
Item number
016552, 016553, 016554, 016555

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer

ASSEMBLY GLOVE WITH LINING
8, 9, 10, 11
Conforms to the following directives, regulations, and standards:

Directive/Regulation	PPE (EU) 2016/425
Harmonized standard	EN 21420:2020, EN 388:2016+A1:2018, EN 511:2006 Cat II
EN 388 111X	EN 511 111

This product was CE marked in a year:
Skara 2022-02-16

EN 388:2016+
A1:2018 Cat IlProduct not assessed for this property

EN 511: 2006

Product not assessed for this property