VS0220 Brake and Clutch Bleeder Pneumatic Vacuum
Product Information:
Product Name: Premier 1.2L Pneumatic Vacuum
Brake & Clutch Bleeder
Model Number: VS0220
Specifications:
- Air Consumption: 180L/min
- Inlet Size: 1/4BSP
- Maximum Air Supply: 174psi/12bar
- Tank Capacity: 1.2L
This product is designed for one-person operation using a
standard workshop air supply. It features a flexible hanging hook
and is made of durable hard-wearing Acetal plastic. The brake
bleeder has a trigger for adjusting air pressure, with an added
trigger lock. It can draw fluid from the bleeding nipple, enabling
either bleeding or full replacement of fluid in the system. The
clear PVC hose allows for easy checking of air bubbles. The hose
length is 1.5m. This product does not require specialized brake
reservoir caps.
Product Usage Instructions:
- Familiarize yourself with the applications, limitations, and
potential hazards of the kit. - Maintain the product in good working order and condition. Take
immediate action to repair or replace damaged parts. - Use only approved parts, as unapproved parts may be dangerous
and will invalidate the warranty. - Keep children and unauthorized persons away from the work
area. - Ensure the work area is clean, tidy, and free from unrelated
materials. - Ensure the work area has adequate lighting.
- Do not use the kit for tasks it is not designed for.
- Do not allow untrained persons to use the kit.
- Do not use the kit while under the influence of drugs, alcohol,
or intoxicating medication. - After use, clean the equipment and store it in a cool, dry,
childproof area. - Dispose of waste liquids in accordance with local authority
regulations. - Always read and comply with the warnings on the brake fluid
container. - Wear eye protection and minimize skin contact. If brake fluid
enters eyes, rinse with plenty of water and seek medical advice. If
swallowed, seek medical advice immediately. - Brake fluid is flammable, so keep it away from sources of
ignition, including hot surfaces like the exhaust manifold. - Brake fluid will damage paintwork. Any spillage should be
flushed with water immediately. - After use, clean the equipment and store it in a cool, dry,
childproof area.
To operate the brake bleeder:
- With this brake bleeder, one person can carry out the bleeding
of brake systems quickly, cleanly, and simply. Please refer to the
diagram below for numbered steps.
(Unfortunately, the diagram referred to in step 4 is not
provided in the text extract.)
PREMIER 1.2L PNEUMATIC VACUUM BRAKE & CLUTCH BLEEDER MODEL NO: VS0220
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction
manual
Wear eye protection
1. SAFETY
9
Familiarise yourself with the applications and limitations, as well as any potential hazards, of the kit.
9
Keep this product in good working order and condition. (take immediate action to repair or replace damaged parts).
9
Use approved parts only (unapproved parts may be dangerous and will invalidate the warranty).
9
Keep children and unauthorised persons away from the work area.
9
Keep work area clean and tidy and free from unrelated materials.
9
Ensure the work area has adequate lighting.
8
DO NOT use the kit to perform a task for which it is not designed.
8
DO NOT allow untrained persons to use the kit.
8
DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.
9
After use, clean equipment and store in a cool, dry, childproof area.
9
Dispose of waste liquids in accordance with local authority regulations.
9
Always read and comply with the warnings on the brake fluid container.
9
Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes, rinse with plenty of water and seek medical
advice. If swallowed seek medical advice immediately.
WARNING! Brake fluid is flammable – keep away from sources of ignition, including hot surfaces e.g. exhaust manifold.
WARNING! Brake fluid will damage paintwork. Any spillage should be flushed with water immediately.
9
After use, clean equipment and store in a cool, dry, childproof area.
2. INTRODUCTION
One-person operation using standard workshop air supply (87-174psi/6-12bar). With a flexible hanging hook. Durable hard-wearing Acetal plastic. Trigger for adjusting air pressure, with an added trigger lock. Draws fluid from the bleeding nipple enabling either bleeding or full replacement of fluid in the system. Clear PVC hose easily checks for air bubbles. Hose length 1.5m. Does not require specialised brake reservoir caps.
3. SPECIFICATION
Model No:……………………………………………………….. VS0220
Air Consumption: ……………………………………………. 180L/min Inlet Size: …………………………………………………………1/4″BSP Maximum Air Supply: …………………………………. 174psi/12bar Tank Capacity: ………………………………………………………. 1.2L
© Jack Sealey Limited
Original Language Version
VS0220 Issue 2 (2,3) 22/03/23
4. OPERATION
Numbers refer to diagram below.
4.1.
With this brake bleeder, one person can carry out the bleeding of the brake systems. Bleeding is completed quickly, cleanly and simply.
Brake fluid is sucked into the container avoiding unnecessary spillages.
4.2.
Connect the gun to the compressed air line system (1).
4.3.
Set the brake bleeder’s rubber pipe on the bleed screw, and loosen the bleed screw (2).
4.4.
Activate the handle of the brake bleeder, a partial vacuum is created in the brake bleeder container, and the fluid is sucked into the
container (3).
4.5.
When the brake fluid is free of air bubbles, which can be seen through the clear hose (4), then tighten the bleed screw and remove the
rubber pipe.
4.6.
Repeat the procedure for each brake calliper.
4.7.
REMEMBER to check brake fluid level in reservoir
ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
VS0220 Issue 2 (2,3) 22/03/23
Sealey - Leading Professional Tool & Workshop Equipment Supplier
