Ideal 36-600 Standard Drill Tap User Guide

Drill Tap Use & Care Guide
36-600

36-600 Standard Drill Tap

For optimal performance:

• Keep drill tap bit perpendicular to work surface.
• Do not slow bit when approaching the threading step. Use full recommended RPM throughout the intitial cut.
• To remove the bit, put the drill in reverse, pull the drill tap up so that the threads are engaged with the bottom of the hole.
  Then, slowly reverse the bit through the hole, making sure to keep the bit vertical.
• Use with cordless or impact rated drills.
• Use a fully charged battery.
• Use the recommended RPM range of 300 to 1500 RPM.

WARNING Electrical and eye injury hazard. Contact with live voltage may cause injury or death. Do not use on or near live voltage. Wear eye protection.
WARRANTY: See www.idealind.com or call Customer Assistance for warranty details.

IDEAL INDUSTRIES, INC.
Sycamore, IL 60178 U.S.A.
800-435-0705 • www.idealind.com
IS 0003-1 Made in Taiwan 
Test Equipment Depot – 800.517.8431 – 5 Commonwealth Ave, MA 01801
TestEquipmentDepot.com 

References

• Welcome to the Test Equipment Depot, your test equipment supplier of all the best brands.
• IDEAL Electrical | Home | Wire Connectors | Hand Tools