WS225-KCL Drywall Sander

DRYWALL SANDER OPERATING MANUAL

Model: WS225-KCL

We are committed to providing tools at a competitive price. Our
“Save Half, Half Price” or similar expressions indicate an estimate
of savings compared to major top brands. Please verify carefully if
you are actually saving half when placing an order.

Before operating the machine, please read all instructions
carefully. VEVOR reserves the right to interpret our user manual.
The appearance of the product may vary from what you received. We
won’t inform you again if there are any technology or software
updates on our product.

Operating Instructions

To ensure proper operation, maintain the appliance according to
the instructions provided. Keep the operating instructions and
associated documents close to the appliance.

When using power tools, observe the following basic safety
precautions to protect yourself from electric shocks, injury, and
fire:

• Read and follow all instructions before using this power
  tool.
• Always check if your mains voltage corresponds with the value
  on the type plate.
• The machine has been double-insulated in accordance with
  EN60745, so an earth wire is not necessary.
• Use proper extension cord: Only use an approved extension cable
  that is suitable for the machine’s power. The cord must have a
  diameter of at least 1.5mm2. When the extension cable is on a reel,
  unroll the cable in its entirety.
• Switch off the machine immediately in case of malfunction in
  the mains plug, power cable, or damaging of cable; broken switch;
  smoke or stench of scorched insulation.

Work Area Safety:

• Keep work area clean and well lit. Cluttered or dark areas
  invite accidents.
• Do not operate power tools in explosive atmospheres, such as in
  the presence of flammable liquids, gases or dust. Power tools
  create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
  Distractions can cause you to lose control.

Electrical Safety:

• Power tool plugs must match the outlet. Never modify the plug
  in any way. Do not use any adapter plugs with earthed (grounded)
  power tools. Unmodified plugs and matching outlets will reduce the
  risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as
  pipes, radiators, ranges, and refrigerators. There is an increased
  risk of electric shock if your body is earthed or grounded.

If you have any questions or need technical support, please
contact us at [email protected].

Product Usage Instructions:

1. Make sure to read and understand the operating manual before
   using the drywall sander.
2. Verify that the mains voltage corresponds with the value on the
   type plate.
3. Use only an approved extension cable that is suitable for the
   machine’s power. The cord must have a diameter of at least 1.5mm2
   and should be unrolled in its entirety if it is on a reel.
4. Before using the machine, ensure that the work area is clean
   and well-lit. Avoid operating power tools in explosive atmospheres,
   and keep children and bystanders away while operating the
   machine.
5. Switch off the machine immediately in case of malfunction in
   the mains plug, power cable, or damaging of the cable; broken
   switch; smoke or stench of scorched insulation.
6. When using the drywall sander, ensure that you do not make
   contact with earthed or grounded surfaces, such as pipes,
   radiators, ranges, and refrigerators.

If you have any further questions or concerns, please contact
our customer service team at [email protected].

DRYWALL SANDER OPERATING MANUAL
Model: WS225-KCL
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half
in comparison with the top major brands.

Model: WS225-KCL

DRYWALL SANDER OPERATING MANUAL

NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us:
[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
-1-

Read through these operating instructions carefully before using the appliance. Become familiar with the functions and method of operation. To ensure proper operation,always maintain the appliance according to the instructions. The operating instructions and associated documents should always be kept close to the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure protection from electric shocks, injury and fire. Read and follow all the instructions before using this power tool. Look after the notes on safety.
Always check if your mains voltage corresponds with the value on the type plate.
The machine has been double-insulated in accordance with EN60745: therefore, an earth wire is not necessary
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted on the tools identification plate .
USE PROPER EXTENSION CORD: Only use an approved extension cable that is suitable for the machine’s power. The cord must have a diameter of at least 1.5mm2. When the extension cable is on a reel, unroll the cable in its entirety
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1.Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3.Smoke or stench of scorched insulation.

1) Work area safety.
a) Keep work area clean and well lit . Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust . Power tools create sparks which may ignite the dust or fumes .
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded .
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord.Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts .
Damaged or entangled cords increase the risk of electric shock .
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.( Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
-4-

inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position bet fore connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally
-5-

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.Many accidents are caused by poorly maintained power tools. f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

–The accessories’ allowed speed must be at least the same as the maximum speed of the machine. Or else, they may be broken or cracked when their running speed is go over the machine’s allowed speed.
— Do not use damaged accessories. Before use, always check whether the accessories are nicked or cracked. For example, to grinding pad, please check the support plate is not cracked. Ensure everybody to be out of the machine’s rotation area and run the machine at max.speed for one minute, which can fully test the accessories.
— Do not put down the machine when it isn’t stopped completely. Otherwise, you will loss control to the machine.
— Cleaning the exhaust port on your machine in regular. When working, control the machine firmly with both hands to ensure safe operation.
— When sanding, do not use too big sandpaper.When choosing grinding disc, please observe the manufacturer’s specifications. The sand paper beyond the grinding block leads to risk of cutting and injury and cause stuck as well.
— The machine can be connect to one extension tubes at most.
— We recommend that you always wear industrial safety gloves and safety goggles when working with the drywall sander.
— Wearing close-fitting clothes is mandatory.
— Always allow for reaction torque.
— Wear protection mask P2 to protect you from hazardous dusts and choose suitable vacuum cleaner.

place.

Attention: Only install the specified sanding pad on the machine.

— Start the machine for necessary sanding work. Operate the machine with short length in narrow and awkward area. Run the machine with medium length for higher walls. Use the machine with longest length for ceilings.
— Do not over-press machine so that to avoid overloading! Press with proper pressure for better grinding effects. Good grinding effects and quality are mainly decided by choosing the right abrasive material.
— Once finishing the sanding task, switch off the machine.

— The switch is faulty. Have the switch replaced.
(2) The operating switch is switched on, but unusual noises can be heard, the motor is not working or only very slowly.
— Switch contact has failed. Have the switch replaced.
— Component jammed. Have the electric tool checked or repaired.
— Too much thrust, as a result the motor is dragging. Use less thrust during the task.
(3) Motor gets hot.
— Foreign substances have got inside the motor. Have the foreign substances removed.
— Lack of or contaminated lubrication grease. Have lubricating grease applied or replaced.
— Pressure too high Use less thrust during the task
(4) Frequent or strong sparks on the commutator.
— Short circuit on the armature. Have the armature replaced.
— Carbon brushes worn out or jammed Have the carbon brushes checked.
— Rough running of the commutator. Have the surface of the commutator cleaned or ground.
For your own safety, never remove parts or accessories of the electric tool during operation. In case of fault or damage have the electric tool repaired only by a specialist workshop or by the manufacturer.

Class ll tool Wear Ear Protection

To reduce the risk of injury, user must read instruction
manual
Wear Eye Protection

For your personal safety, READ and UNDERSTAND before using. Save This Instruction For Future Reference
Always Wear Ear Protection With This Tool
Always Wear Eye Protection With This Tool
Always Wear a breathing Mask With This Tool

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Manufacturer: Ningbo Haq Tool Co.,Ltd AddressNo. 8 Jinfeng Road, Econbmic Development Zone, Yuyao City, Zhejiang, P.R.China.
Made In China

-16-

-17-

No

Part name

Qty

1

Self- adhesive sandpaper

1

2

Allen screws

1

3

Flat pads

1

4

Grinding disc

1

5

Oil seal

1

6

Flat key

1

7

Output shaft

1

8

Three combination screws

10

9

Gearbox cover

1

10

Paper pads

1

11

Ball bearings

2

12

Final stage gear

1

13

Retaining rings for shafts

1

14

Ball bearings

1

15

Gearbox body

1

16

Flat pads

1

16A

Three combination screws

1

16B

Flared mouth damping

2

17

Movable sleeve fixing tab

1

18

Activity set

1

19

Removable sleeve holder

1

20

Windshield

1

21

rotor

1

22

Flat pads

1

23

Ball bearings

1

24

Phillips self- tapping screws

4

25

stator

1

26

Phillips self- tapping screws

11

27

Small sheath

2

28

Case briquettes

1

29

Case

1

30

Small sheath

2

31

Chassis back cover

1

32

Dust cap

1

33

Double row of brushes

1

34

Phillips self- tapping screws

4

35

Flat pads

1

36

Suction regulating wheels

1

37

Lateral edges

1

38

Protective cover

1

39

Light strips

1

39A

Light strip power

1

40

Compression spring

4

41 Large washer combination screws 4

42

LED switch

1

43

Cover on the protective cover

1

44

Shield connector

1

45

Hoops

1

46

Two- core light wire

1

47

Two- wire vacuum cleaner

1

48

Left front handle

1

specs M6X14
6
3x3x8 WS225 M4X20
6000 RS 10 608Z 10
M6X15
WS225 8
608 RS ST3*25 WS225 ST4*14
5010
ST4*10 4
11.5*24 ST4X12
25-38 500

WS225-KCL Exploded View List

No

Part name

48A

Left front handle decorative cover

49

Stretch spring

50

Left main handle

51

Special flat pad

51A

Eccentric wrench threaded pin

51B

Eccentric wrench round pin

52

Eccentric wrench

53

jacket

54

Crimping clips

55

Five- core wire

56

Hook- up

57

Dust jacket

58

Rear double channel aluminum tube

58A

Post- rubber sleeve briquettes

58B

Return spring

58C

Adjustment screws

58D

Supports

58E

Round pin

58F

Lock the wrench

58G

Front rubber sleeve briquettes

58H

Front rubber sleeve

59

Aluminum tube fittings

59A

Front double channel aluminum tube

59B

rivet

59D

Sealing rings

59E

Round pin

59F

Rear rubber sleeve

60

Lamp wire connection cover

61

Extension nut

62

Right main handle

63

Phillips self- tapping screws

64

Right front handle

64A

Right front handle decorative cover

65

Threaded pins

66

Trademark cover

67

Switch the governor

68

Line control board

69

Main handle bottom cover

70

Upper sub- handle

71

Switch speed control panel

72

Dust collection pipe fittings

73

Elliptical tube

74

Elliptical tube connection sleeve

75

Elliptical tube positioning sleeve

76

Lower sub- handle

77

Power cord

78

Allen key

79

Dust collection tube

80

Joint

81

Joint

82

Connect the wire terminals

Qty specs

1

1

1

1

1

1

1

1

1

1

1.35M

1

3*16

1

1

1

1

1

1

2

1

1

1

1

1

3

1

1

1

1

1

M6

1 17 ST4*16

1

1

2

M6

2

1

1

1

1

1

1 1 1 1

1

1

1

S5

1

1

35

1

57

1

-18-

Support and E-Warranty Certificate www.vevor.com/support Made In China

References

• vevor.com/support
• vevor.com/support