Kohler K-20201-la Underscore 60 X 30 Inch Alcove Bath Instruction Manual

Kohler K-20201-la Underscore 60 X 30 Inch Alcove Bath Instruction Manual

KOHLER

KOHLER K-20201-LA Underscore 60 x 30 Inch Alcove Bath

KOHLER K-20201-LA Underscore 60 x 30 Inch Alcove Bath Product

Features

  • Convenient 19″ step-over height retains the same depth as a standard 21″ bath
  • Integral lumbar support
  • Slotted overflow allows for deep soaking
  • Integral apron creates a clean, finished look
  • Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
  • Textured bottom surface
Material
  •  Acrylic

Installation

  • Left drain
  • Requires K-7271 or K-7272 Clearflo slotted overflow bath drain (sold separately)
  • Alcove

Required Products/Accessories

  • K-7271 Brass Slotted Overflow Bath Drain
  • K-7272 PVC Slotted Overflow Bath Drain

Recommended Products/Accessories

  • K-23726 Drain treatment
  • K-23732 Tub & shower cleaner
  • K-31797 Slotted overflow bath drain kit
  • K-31795 Slotted overflow above-the-floor bath drain kit

Codes/Standards

  • CSA B45.5/IAPMO Z124
  • ASTM E162
  • ASTM E662
  • ADA

KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty See website for detailed warranty information.

Available Colors/Finishes Color tiles intended for reference only.

Color Code Description gray 0 White

KOHLER K-20201-LA Underscore 60 x 30 Inch Alcove Bath (1)

No change in measurements if connected with drain illustrated. (K-7272)

KOHLER K-20201-LA Underscore 60 x 30 Inch Alcove Bath (2)

Technical Information

All product dimensions are nominal.

  • Installation: Three-wall alcove
  • Drain location: Left
  • Basin area, bottom: 46-1/4″ x 22″ (1175 mm x 559 mm)
  • Basin area, top: 52″ x 24″ (1321 mm x 610 mm)
  • Weight: 100 lbs (45.4 kg)
  • Minimum floor load: 56 lbs/ft² (273.4 kg/m²)
  • Water depth: 15-1/2″ (394 mm)
  • Water capacity: 68 gal (257.4 L)
  • Minimum flat for door: 2-3/4″ (70 mm)

Notes Measure your actual product for rough-in details. Install this product according to the installation instructions. The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary. ADA compliant when installed to the specific requirements of these regulations.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals