N7521-716-L Smoked Iron and Soft Brass ADA Wall Sconce Wall Light
Product Information
The product is an indoor light fixture with item code
N7521-716-L. It comes with mounting hardware, including two
mounting screws and a ground screw. The fixture is dimmable with
ELV and/or LED compatible wall dimmer switches. It has wires for
black/smooth, white/ribbed, and green/bare copper (ground). The
fixture is designed to be mounted on a junction box, which is not
included in the package. The installation illustration in the
manual is for reference purposes only and may or may not be
identical to the purchased product.
Product Usage Instructions
- Shut off power at the fuse box or circuit breaker box.
- Carefully unpack the new fixture and lay out all the parts in a
clear area. Take care not to misplace any small parts necessary for
installation. - Loosen screws (C) to remove mounting plate (A) from fixture
body (D). - Attach mounting plate (A) to the junction box using mounting
screws (B). The side of mounting plate (A) marked GND must face
out. - Connect the electrical wires as shown in Fig. 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to mounting plate (A) using green screw provided. - Tuck the wire connections neatly into the junction box.
- Place fixture body (D) over mounting plate (A) and secure with
screws (C). - Turn on the power at the fuse box or circuit breaker box and
test the fixture.
INSTALLATION INSTRUCTIONS
Item#N7521-716-L (New. 2022/05/19) READ AND SAVE THESE INSTRUCTIONS
W AR N I N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1)
Fig. 1
1. Shut off power at the fuse box or circuit breaker box Set# A-021-120170
and remove the old fixture including the mounting -Mounting Screw *2
2.
hardware. Carefully unpack
your
new
fixture
and
lay out
all
the
-Ground Screw -Mounting Plate
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
3. Loosen screws (C) to remove mounting plate (A) from
fixture body (D).
4. Attach mounting plate (A) to junction box (Not
included) using mounting screws (B). The side of
mounting plate (A) marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2) 5. Connect the electrical wires as shown in Fig. 2, making
sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided. 6. Tuck the wire connections neatly into junction box.
AB
C D
FINISHING THE INSTALLATION (Fig.1) 7. Place fixture body (D) over mounting plate (A) and
secure with screws (C).
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Dimmable with ELV and/or LED compatible wall dimmer switches.
LA-3546E
