Home Store More 087034 Tabletop Led Garden Water Feature Instruction Manual

087034 Tabletop LED Garden Water Feature

Product Information: Buddha Tabletop Water Fountain

The Buddha Tabletop Water Fountain is a decorative fountain that
combines a unique design with a creative theme. The product
includes a fountain top, a reservoir, and a pump. It is carefully
packaged, inspected, and tested to ensure safe operation.

Instructions for Use:

1. Remove the plastic bag from packaging and read the instruction
   sheet before proceeding.
2. Place the base on a flat surface and insert the reservoir onto
   the base.
3. Read the pump user manual and insert the water pump into the
   water tube.
4. Insert the fountain top onto the reservoir and put the pump
   into the water. The water should be higher than the pump.
5. Make sure the water tube is properly connected to the pump and
   is not crimped.
6. The concave edge of the fountain top should adhere to the
   convex part of the reservoir. Ensure that the electric wire is
   passed through the wire opening.
7. Connect the power cable to an outlet. If installed properly,
   water flow in the fountain will begin shortly.
8. Please do not use the electrical plug in wet weather
   conditions. Note that on first use, there may be air in the pump.
   It may take several minutes until all the air escapes.

Safety Guidelines:

1. Read all instructions and safety guidelines thoroughly. Failure
   to follow guidelines and instructions could result in serious
   injury and/or property damage.
2. Do not pump flammable liquids such as gasoline or fuel oil with
   the fountain pump.
3. Ensure that the water tube is properly connected to the pump
   and the upper layer, and the tube is not crimped. This could cause
   a blockage, and water will not come out.
4. During operation, the area around the pump will be covered with
   water. Take care when handling the pump; do not pull it out of the
   water (when running) by the power cord, and do not move the product
   while in operation.
5. Unplug the pump from electric power before servicing, cleaning,
   or moving.

Cleaning and Maintenance:

1. If, after time, the pump starts to lose power or stops working,
   check for the buildup of sediment or scale at the bottom of the
   pump housing or in the reservoir.
2. Remove the blockage or any dirt and scale which may have built
   up and close the case back up.
3. Periodically change water and keep water clean. We recommend
   distilled water to prevent mineral build-up. This will improve the
   waterfall effect.

INSTRUCTION MANUAL
PLU: 087034 BUDDHA TABLETOP WATER FOUNTAIN
Thank you for purchasing this fine decorative fountain.This product combines our lastest design with a creative theme,and is carefully packaged, inspected, and tested to ensure safe operation. The following instructions and safety guidelines will enable you to use the product for trouble-free operation. Please read the insturctions and safety guidelines entirely before using the product.
The product consists: (1) Fountain Top (2) Reservoir (3) Pump
Instructions for use:
1. Remove plastic bag from packaging. Read this instruction sheet before proceeding.
2. Place base on a flat surface, and insert reservoir onto base.
3. Read pump user manual. Insert the water pump into water tube. 4. Insert fountain top on reservoir and put pump into water. Water should be higher than the pump. 5. Make sure the water tube is properly connected with the pump, and is not crimpled.
6. The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening. 7. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly. 8. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in the pump. It may take several minutes until all the air escapes. Safety Guidelines:
1. Read all instructions and safety guidelines thoroughly. Failure to follow guideline and instructions could result in serious injury and/or property damage.
2. Do not pump flammable liquids such as gasoline or fuel oil with the fountain pump.
3. Make sure the water tube is properly connected with the pump and the upper layer, and the tube is not crimpled.This could cause a blockage, and water will not come out. 4. During operation, the area around the pump will be covered with water. Take care when handling the pump; do not pull it out of the water (when running) by the power cord, and do not move the product while in operation. 5. Unplug the pump from electric power before servicing, cleaning, or moving.
Cleaning and Maintenance:
1. If, after time, the pump starts to lose power or stops working, you should check for the buildup of sediment or scale at the bottom of the pump housing, or in the reservoir. 2. Remove the blockage or any dirt and scale which may have built up and close the case back up. 3. Periodically change water and keep water clean. We recommend distilled water to prevent mineral build-up. This will improve the waterfall effect.