2337 Fubbles Fun FiNiTi Bubble Blower
Product Information
The Fubbles Fun FiNiTi Bubble Blower #2337 is a battery-powered
bubble blower designed to create a continuous stream of bubbles for
fun and entertainment. It can be operated with or without an
external capability switch. The bubble blower is equipped with a
1/8 jack for use with external capability switches with a 1/8 plug.
The product requires 4 AA alkaline batteries (not included) for
operation.
The bubble blower features a push-button ON/OFF switch located
on the back side of the unit. It also has a battery compartment on
the side, which can be accessed by unscrewing the battery
compartment cover using a Phillips head screwdriver. The battery
compartment should only be used with alkaline batteries, such as
Duracell or Energizer brand. Mixing different types or brands of
batteries or using rechargeable batteries may cause the unit to not
perform properly.
To fill the bubble blower, unscrew the base of the unit and pour
in the included 2 oz. bubble solution. Then, fill the remainder of
the base with tap water and screw the base back on.
Product Usage Instructions
- Ensure that the bubble blower is turned OFF before
starting. - Insert 4 AA alkaline batteries into the battery compartment,
following the proper (+) and (-) polarity. - Replace and screw the battery compartment cover securely.
- If using an external capability switch, make sure the push
button ON/OFF switch is in the OFF position. - Connect an external capability switch (not included) to the 1/8
jack located at the back of the Bubble Blower’s base. Ensure that
the switch is fully plugged in without any gaps. - To fill the bubble blower, unscrew the base and pour in the
included 2 oz. bubble solution. Fill the remaining space with tap
water and screw the base back on. - If using the bubble blower without an external switch, set the
ON/OFF switch to the desired position. - To start blowing bubbles, turn ON the bubble blower or activate
the external capability switch. - When finished playing, turn OFF the bubble blower to prevent
battery drain.
Troubleshooting
If the Bubble Blower does not function correctly, follow these
troubleshooting steps:
- Check that all batteries are installed correctly, following the
proper (+) and (-) polarity. Ensure that all batteries are
fresh. - If necessary, replace the batteries, paying close attention to
proper (+) and (-) polarity. - Ensure that there is enough bubble solution in the solution
bottle to cover the tube for proper syphoning. - Clean the tubes by placing them in warm water and turning on
the bubble blower for 2 or 3 minutes to flush out the bubble
solution. - Make sure the connection between the external capability switch
is fully plugged in without any gaps. - Try using your switch with another switch-operated toy/device
to rule out any issues with your switch.
Care of Unit
If you will not be using the Bubble Blower for an extended
amount of time, it is recommended to remove the batteries. The unit
can be wiped clean with any household multipurpose cleaner and
disinfectant.
Fubbles Fun FiNiTi Bubble Blower #2337 USER’S GUIDE
For Technical Support: Call our Technical Service Department Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697 [email protected]
50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com
No spill! Activate your capability switch and this colorful blower will create hundreds of bubbles. No spill design and handy carry handle. Includes 2 oz. of bubble solution. Size: 5½”W x 7 ¾” H x 5½”D. Requires 4 AA Batteries. Weight: 1½ lbs.
Operation: 1. Fubbles requires 4 AA batteries (Not included) to operate. Use
alkaline batteries only (e.g. Duracell or Energizer brand). Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly. Never mix old and new batteries together or different brands or types together.
2. The battery compartment is located on the side of the bubble blower. Turn the bubble blower to reveal the battery compartment cover. Using a Phillips head screwdriver unscrew the cover and install 4 AA batteries, paying close attention to proper (+) and (-) battery polarity.
3. Replace the battery compartment cover and screw. For external switch use, the push button ON/OFF switch needs to be in the OFF position. Connect to any external capability switch (not included) via the jack located at the back of the Bubble Blower’s base. Fubbles Bubble Blower is equipped with a 1/8 jack for use with external capability switches with a 1/8 plug. Make sure you have your switch plugged in all the way. There should be no gaps.
4. To fill the Bubble Blower, unscrew the base of the bubble blower. Pour the contents of the included 2 oz. bubble solution. Next, fill the remainder of the base with tap water. Screw that base back on.
5. The Bubble Blower can also be used with or without an external switch. The ON/OFF switch is located back side of the unit. When using an external capability switch, the ON/OFF switch needs to be set in the OFF position. Actuate your external capability switch and the bubbles will start to flow! Once you release your switch the bubbles will stop.
6. When finished playing with Bubble Blower turn OFF to prevent battery drain.
Troubleshooting:
Problem: The Bubble Blower does not function correctly.
Action #1: Check that all the batteries are installed, following proper (+) & (-) polarity. Also check that all batteries are fresh.
Action #2: Replace the batteries paying close attention to proper (+) and (-) battery polarity.
Action #3: Make sure you have enough Bubble solution in the solution bottle. The Bubble solution should cover the tube enough to syphon the solution.
Action #4: Clean the tubes with warm water. Place the tubes in warm water and turn the bubble blower on. Let the bubble blower run for 2 or 3 minutes to allow the water to flush out the bubble solution.
Action #5: Make sure that the connection between the external capability switch is plugged in all the way. There should be NO gaps.
Action #6: Try your switch with another switch operated toy/device in an effort to rule out your switch as the source of the problems.
Care of Unit: If you will not be using the Bubble Blower for an extended amount of time, we recommend removing the batteries.
The Bubble Blower can be wiped clean with any household multipurpose cleaner and disinfectant.
Do not submerge the unit, as it will damage the contents and the electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Rev 4/1/2022
Products For People With Special Needs | Enabling Devices
