Generation Lighting Wall 4164201, 4464202, 4464203, 4464204 Fullton Wall Instruction Manual

4164201, 4464202, 4464203, 4464204 Fullton Wall

Product Information

The Fullton Wall is a wall fixture that is intended to be
installed using NEC compliant junction boxes. The product is safety
listed for damp locations, making it suitable for use in bathrooms
and other areas with high humidity levels. The fixture comes with a
mounting plate, a shade, a socket shade base, cap nuts, mounting
studs, and collar nuts. The fixture can accommodate up to 7 lamps
and has a maximum wattage limit, which is indicated on the socket
label.

Product Usage Instructions

1. Secure the mounting plate to the junction box or wall where you
   want to install the fixture.
2. Connect the fixture to a suitable ground in accordance with
   local electrical codes.
3. Connect the white fixture wire to the neutral power line wire
   using a wire nut.
4. Connect the black fixture wire to the hot power line wire using
   a wire nut.
5. Neatly place the wires into the junction box, place the fixture
   onto the mounting studs, and secure it in place by screwing the cap
   nuts onto the studs.
6. Place the shade over the socket and onto the shade base, then
   secure it in place by screwing the collar nut onto the socket.
   Repeat for remaining shades.
7. Screw the lamp(s) into the socket(s) while referring to the
   label on the socket for Max Wattage Information.

Note: It is important to follow all applicable installation
codes and safety guidelines when installing this product. If you
are unfamiliar with the construction and operation of this product
or the hazards involved, seek professional assistance. Keep these
instructions for future reference.

Installation Instructions for
Fullton Wall

WALL

FULLTON_WALL
4164201, 4464202, 4464203, 4464204 1.0

GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation.

CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!

©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500
www.generationlighting.com

Install the Fixture
1A

7 LAMP
COLLAR NUT

JUNCTION BOX 3 2

MOUNTING PLATE

SHADE

5

6
SOCKET SHADE BASE

4

CAP

NUT MOUNTING

STUD

1 Secure the mounting plate to the junction box or wall.

2 Connect the fixture to a suitable ground in accordance with local electrical codes.

3 Connect the white fixture wire to the neutral power line wire with a wire nut.

4 Connect the black fixture wire to the hot power line wire with a wire nut.

5 Neatly place the wires into the junction box, place the fixture onto the mounting studs, and secure it in place by screwing the cap nuts onto the studs.

6 Place the shade over the socket and onto the shade base, then secure it in place by screwing the collar nut onto the socket. Repeat for remaining shades.

7 Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.

2

References

• Generation Lighting - Our Collections