Vado Post 1-Light Outdoor Post Lantern
Installation Instructions for Vado Post OUTDOOR
Product Name: Vado Post
Model Number: VADO_OD_POST
Part Number: 8231101 1.0
General Product Information:
This product is safety listed for wet locations. This
instruction shows a typical installation.
CAUTION – RISK OF FIRE: This product must be
installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product
and the hazards involved.
SAVE THESE INSTRUCTIONS!
For installation, follow the steps below:
Install the Fixture
- Attach the post to a suitable base using the post screw
(2). - Insert the cover screw (1A) into the post (2).
- Attach the shade (7) to the socket shade base (5).
- Insert the lamp (4) into the socket shade base (5).
- Attach the socket shade base (5) to the post (2).
Note: This is a typical installation guide. If you are not
familiar with electrical work, please consult a professional
electrician for installation.
Contact Information:
Generation Lighting
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
Website: www.generationlighting.com
Installation Instructions for
Vado Post
OUTDOOR
VADO_OD_POST
8231101 1.0
GENERAL PRODUCT INFORMATION:
This product is safety listed for wet locations. This instruction shows a typical installation.
CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
©2023 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500
www.generationlighting.com
Install the Fixture
1A
COVER SCREW
7 COVER
SHADE
LAMP
5 SOCKET SHADE BASE
4
POST SCREW
1
3
2
POST
1 Connect the fixture to a suitable ground in accordance to local electrical codes. 2 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut. 3 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut. 4 Secure the fixture to the post with post screws. 5 Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information. 6 Screw the shade into the shade base. 7 Place the cover onto the fixture, align the cover holes to the fixture holes, and secure it in place with the cover screws.
2
Generation Lighting - Our Collections
