Product Information

Model: NDM-15WT, NDM-20WT, NDM-24WT

Warranty: The products are covered by a 5-year parts &
labour warranty.

Contact Information:

Australia: Email: [email protected],
Phone: +61 (03) 9563 2778
New Zealand: Email: [email protected],
Phone: +64 (09) 916 0960

Product Usage Instructions

Replacement of Supply Cord

The supply cord must be replaced by a service agent or
equivalent qualified person in order to prevent a hazard if it is
damaged.

Storage

If you do not plan to use the heater for extended periods of
time, it is recommended that the heater is cleaned and then stored
(preferably in its original packaging) in a cool dry place.

Mounting Guide

Ceiling/Picture frame:

Minimum distance from ceiling: 1000mm
Minimum distance from picture frame: 100mm

Floor:

This heater MUST be installed to the minimum required distances
at the four sides of the heater.

View Fullscreen

Model:
NDM-15WT NDM-20WT NDM-24WT

WARNING: -Do not use this heater if it has been dropped. -Do not use if there are visible signs of damage to the heater. -Use this heater on a horizontal and stable surface,or fix it to the wall, as applicable. -Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own,unless constant supervision is provided. -To reduce the risk of fire,keep textiles,curtains,or any other flammable material to a minimum distance of 1m from the air outlet.

· Do not operate with cord coiled up as a buildup of heat is likely, which could be sufficient to become a hazard. · The use of an extension cord with this appliance is not recommended. · Do not remove plug from power socket until the appliance has been switched off. · Do not remove plug from power socket by pulling the supply cord-always grip plug. · Always unplug appliance when not in use. · CAUTION: This product is NOT suitable to be used on long pile carpets or Flokati rugs. · Do not allow cord to come in contact with heated surface during operation. · Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from traffic areas so that it will not be tripped over. · Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area. · Do not use outdoors or whilst standing on a damp floor. · Do not store appliance while it is still hot. · This appliance is not intended for use by young children or infirm persons without supervision. · Young children should be supervised to ensure they do not play with the appliance. · The appliance must not be located immediately below a socket-outlet. · Do not use this appliance with another programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the appliance is covered or positioned incorrectly. · All covers on this appliance are intended to prevent direct access to the heating elements and must be in place when the appliance is in use. · WARNING: In order to avoid overloading, do not cover the heater. · To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product.The fireguard does not give full protection for young children and for infirm persons.If the supply cord is damaged, it must be replaced by a qualified electrical person to avoid a hazard. · Do not use this appliance outdoors or on wet surfaces avoid spilling liquid on the appliance. · CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be connected to an external switching device, such as a timer, or connected to a circuit that is regularly on and off by the utility. · Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
[&]· This appliance is intended for domestic use. Wam;ngc Ve,y hot ‘”rlaoo @Important, Do not oove,
Products are covered by a 5-year parts & labour warranty For more information please contact: AUSTRALIA: email: salesolimpiasplendid.com.au, PH +61 (03) 9563 2778 NEW ZEALAND: email: adminkeyserviceltd.co.nz, PH +64 (09) 916 0960
3

· DO NOT cover the heater when it is working. · Always store the heater when not in use. · Make sure the heater has cooleddown before storing it away.
eREPLACEMENT OF SUPPLY CORD
The supply corddamagedmust be replacedby a s ervice agent or equivalent qualifi ed person in order to prevent a hazard.
estorage If you do not plan to us e the heater for extended periods of time, it is recommended that the heater is clean ed and then stored (preferably in its original packaging) in a cool dry place.

Mounting Guide
Ceiling/Picture frame Minimum 1000mm

Minimum 100mm

I Minimum 100mm
Floor

ill This heater MUST be installed to the minimum required distances at the four sides of the heater.

—————- ·

0:: iiiiiil : nunununununu · nnnnnnm111nnnnnnn

‘:

:- H

I ; , illllOOOOO 00000111100000001111100000000 OIIIIIOOOi, ‘:’

– – L1- —— L ——-

H
1.Insert the bracket(to the hole),turn it anticlockwise 90 ° , fasten it with screw; 2.Press the rubber pad (in the hole), fasten it with screw.