P305-5-654-L Floor Lamp
Product Information: Floor Lamp Model# P305-5-654-L
The Floor Lamp Model# P305-5-654-L is a touch dimmer switch lamp
with 3 different brightness settings that can be adjusted as per
your preference. The lamp has a maximum wattage rating which should
not be exceeded. The lamp comes with spring washers and allen
screws for easy installation. The lamp is made in China.
Product Usage Instructions
- WARNING: Risk of shock, do not plug in the unit before assembly
is complete. Before turning on, please follow the instruction
manual step by step. - Carefully unpack your new lamp and place all parts on a smooth,
flat surface to protect the finish until ready to install. - Align lamp body (C) onto base (D). Secure lamp body (C) onto
base (D) with spring washers (E) followed by allen screws (F) via
allen wrench (G). - Connect the power adapter (A) to connector (B).
- Plug into power outlet and test your new fixture. Adjust the
arm location as desired. - This lamp uses a touch dimmer switch with 3 different
brightness settings:- 1st touch: On/Low brightness
- 2nd touch: Medium brightness
- 3rd touch: Max brightness
- 4th touch: Off
- IMPORTANT SAFETY INSTRUCTIONS:
- Never use with an extension cord unless the plug can be fully
inserted. - Do not change or alter.
- IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED
ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
- Never use with an extension cord unless the plug can be fully
Installation Instruction For Floor Lamp Model# P305-5-654-L
WARNING: Risk of shock, do not plug in the unit before assembly is complete. Do not exceed the maximum wattage rating. (Ne pas depasser la puissance nominale maximale!) Before turning on, please follow the instruction manual step by step. INSTALLATION 1. Carefully unpack your new lamp and place all parts on a smooth, flat
surface to protect the finish until ready to install. 2. Align lamp body (C) onto base (D). Secure lamp body (C) onto base (D)
with spring washers (E) followed by allen screws (F) via allen wrench (G). 3. Connect the power adapter (A) to connector (B). 4. Plug into power outlet and test your new fixture. Adjust the arm location as
desired. 5. This lamp uses a touch dimmer switch with 3 different brightness settings:
1st touch: On/Low brightness 2nd touch: Medium brightness 3rd touch: Max brightness 4th touch: Off IMPORTANT SAFETY INSTRUCTIONS 1. Never use with an extension cord unless the plug can be fully inserted. 2. Do not change or alter.
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
MADE IN CHINA
