Make It Real 1207 Gold Link Suede Bracelets Instructions (+ PDF)

1207 Gold Link Suede Bracelets
Instructions

Contents hide

1 1207 Gold Link Suede Bracelets

6 LEAF CHARM BRACELET

7 KNOTTED BRACELET

8 Documents / Resources

9 Related Posts

1207 Gold Link Suede Bracelets

1 gold charm
3 colors of faux suede 4.5 m (4.9 yd)
2 curb chains
38 assorted beads
66 gold jewelry pieces
PlayTray

LEGEND

Scissors
Adhesive tape
Repeat,
Ruler
Pliers

Not included

TASSEL NECKLACE

Cut the ends of section ‘a’ of the faux suede lace at an ante.
Thread the three beads onto the lace as shown.
Align the beads with the middle of the lace.
Pinch the two ends of the lace together
Thread both ends trough the round gad bead
Slide the bead further up the ends as shown.
Thread beads up each end as shown.
Cut the angled ends of the laces to a blunt tip.
Fold the gold cap piece over the tip of the strand as shown.
Secure the piece with pincers.
Repeat steps 9-10 with the other end.
Slide the bead groups to both ends of the lace.
The beads should rest at the tips.
Arrange laces c d , and cb’ along volh the two gold ligs.
Slide the gold ring onto the laces.
Fold the laces in half, sliding the gold ling up to the middle fold.
Slide the bigger ring through the folded end.
Repeat steps 15-17 with the remaining lace sections.
Attach the jump ring to the tassel and to the end of the necklace.
Use pliers to secure the jump ring closed.
Repeat steps 19-20 with the other end of the necklace.
Double up the loop to create your necklace!

BRAIDED BRACELET

Arange the strands in the order ‘a’, b, ‘a’, and ‘c’.
Secure them together with adhesive tape.
Clamp the attachment over all four strands with piers.
HOW TO MAKE THE BRAID
Start with all 4 strands aligned.
Cross the two outside strands, right over left (red over purple, green over purple).
Crossthetwo middle strands left over right
Cross the two outside stands again, right over left (green over red, purple over purple).
Cross the middle strands, left over right (red over purple).
Cross the outside strands, right over left (purple over green, purple over red).
Cross the middle strands, left over right. Continue this until you reach the end.
Wrap the end of the braid with adhesive tape.
Clamp the end piece over the strands with pliers.
Open the jump ting with pliers.
Attach the lobster clasp to the end piece with the jump ring. Close the jump ring with pliers.
The end piece should now look as shown.
Clamp an end piece to the other end of the braid. Arrange the chain and jump ring as shown.
Open the ring with the pliers.
Connect the chain to the bracelet with the jump ring. Close the jump with the pliers.
Slide all three strands through the small gold ring. Fold them in half to make a tassel.
Slide the bigger ring through the tassel.
Select the section of the bracelet to add the tassel.
Open a jump ring with pliers.
Pull the open loop through a strand and close the jump ring with the pliers.
Close the bracelet by clipping the end piece to the chain.

CHAIN BRACELET

Slide one of the purple cords through the first link of the chain.
Align the center of the cord with the link and fold it in half.
Repeat steps 1-2 with the other cord on the opposite side of the chain.
Thread both ends of the cords through all three beads.
Slide the beads up the cords until they touch the chain.
Repeat steps 4-6 on the other side of the chain.
Slide the gold ring through both cords from one side of the bracelet.
Slide the other two cords ends through the ring in the opposite direction.
Pull on the cord ends to adjust the size of the bracelet.

BEADED BRACELET

Arrange the beads and pink cord as shown.
Thread the beads through the cord.
Align the beads with the center of the cord.
Find the large gold bead as shown, and pinch both cord ends together.
Slide the bead up both cords to adjust the size of the bracelet.

LEAF CHARM BRACELET

Thread 45 gold rings through the red cord.
Slide the rings to align with the middle of the cord.
Make a simple knot against one end of the rings to keep them in place.
Make another simple knot on the other side of the rings.
Use pliers to attach the gold end piece to one end of the cord by folding itoverand securing it in place.
Repeat step 5 for the other end of the cord.
Open the jump ring and use it to connect the lobster clasp to the end of the bracelet. Close the jump ring with the pliers.
Open the jump ring with the pliers.
Slide the jump ring on the end piece and close it with pliers.
Decide where you’d like the leaf charm to be on the bracelet.
Open the jump ring with pliers. Slide the jump ring through around the bracelet and attach the leaf charm to it.
Close the loop with pliers.

KNOTTED BRACELET

Thread one end of each cord through the bead in opposite directions.
HOW TO MAKE THE PURPLE KNOT
Hold the end of the purple cord.
Cross the purple cord OVER the red cords.
Pass the purple cord UNDER both cords.
Cross the purple cords OVER both cords again.
Pass the purple cord UNDER both cords again.
Pull the end of the purple cord through the other purple cords as shown.
Pull the cord tight to complete the knot.
HOW TO MAKE THE RED KNOT
Hold the end of the red cord.
Cross the purple cord OVER the red cords.
Pass the red cord UNDER both cords.
Cross the red OVER both strands once again.
Pass UNDER both strands once more.
Pull the end of the red cord through the other red cords as shown. Pull the cord tightly to complete the knot.
Pull both ends of the red and purple cords.
The bead should be secured by the knots as aati.
Pinch both ends of the cords together.
Slide the gold bead up both cords.
Pinch both ends of the cords together.

Avoid soaking the bracelets in water.

WARNING!
CHOKING HAZARD – Small parts. Not suitable for children under 3 years.
STRANGULATION HAZARD — Functional long cord. Adult supervision required.

MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville, MD 21208 USA
410-995-8685
Jactin House, 24 Hood Street
Ancoats, Manchester, M4 6W)( UK +44 (0) 161 302 4100
© 2023 MAKE IT REAL, LLC
EU Responsible Person (Cosmetics):
Made in China