ERICO A239GC2S242Q4RH Prefabricated Gate Jumper Assembly

Prefabricated Gate Jumper Assembly

The Prefabricated Gate Jumper Assembly with Ground Leads is a
product designed to provide an alternative to nVent ERICO Cadweld
connections when such connections are not possible with aluminum
pipe or thin-wall steel tube. The assembly is available in both
left and right-hand orientation.

Features

• Jumper conductor is insulated
• Stainless steel hardware included
• Available in either left or right-hand orientation

Product Attributes

• Material: Copper; Stainless Steel 18-8 (EN 1.4305); Stainless
  Steel 304 (EN 1.4301)
• Finish: Tinned
• Orientation: Right Hand
• Fixed Gate Diameter, Nominal: 3 1/2
• Fixed Gate Diameter, Actual: 4
• Post Frame Diameter, Nominal: 1 1/2
• Post Frame Diameter, Actual: 1.90
• Jumper Conductor Size: 4/0 Stranded
• Jumper Length: 24″
• Ground Lead Conductor Size: 4/0 Stranded
• Ground Lead Length: 4′

Additional Product Details

Fixed gate refers to the pipe on the fence itself, while post
frame refers to the post on the swinging door. Left-hand
orientation is shown in the diagram.

Diagrams

See diagram A239-EB-2S-24-2Q-4-RH for reference.

Product Usage Instructions

To use the Prefabricated Gate Jumper Assembly with Ground
Leads:

1. Determine the appropriate orientation (left or right-hand) for
   your gate.
2. Ensure that the fixed gate diameter is 3 1/2″ and the post
   frame diameter is 1 1/2″.
3. Connect the insulated jumper conductor to the fixed gate and
   the post frame using the included stainless steel hardware.
4. Connect the ground lead to a suitable grounding point using the
   included stainless steel hardware.

Warning

nVent products must be installed and used only as indicated in
nVent’s product instruction sheets and training materials. Improper
installation, misuse, misapplication, or other failure to
completely follow nVent’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury, and
death and/or void your warranty.

PREFABRICATED GATE JUMPER ASSEMBLY WITH GROUND LEADS, RIGHT HAND, 3 1/2″ GATE, 1 1/2″ POST, 4/0 STRANDED, 4′ GROUND
CATALOG NUMBER
A239GC2S242Q4RH
FEATURES
Ideal for when nVent ERICO Cadweld connections cannot be made to aluminum pipe or thin-wall steel tube Jumper conductor is insulated Stainless steel hardware included Available in either left or right-hand orientation
PRODUCT ATTRIBUTES
Material: Copper;Stainless Steel 18-8 (EN 1.4305);Stainless Steel 304 (EN 1.4301) Finish: Tinned Orientation: Right Hand Fixed Gate Diameter, Nominal: 3 1/2″ Fixed Gate Diameter, Actual: 4″ Post Frame Diameter, Nominal: 1 1/2″ Post Frame Diameter, Actual: 1.90″ Jumper Conductor Size: 4/0 Stranded Jumper Length: 24″ Ground Lead Conductor Size: 4/0 Stranded Ground Lead Length: 4′

ADDITIONAL PRODUCT DETAILS
“Fixed gate” refers to the pipe on the fence itself, while “post frame” refers to the post on the swinging door. Left hand orientation shown in diagram.
DIAGRAMS

A239-EB-2S-24-2Q-4-RH

A239

Series

EB

Clamp Code

2S

4/0 AWG Flexible Jumper Designation

24

Jumper Length (inches)

2Q

Ground Lead Cable Code (AWG)

4

Ground Lead Length (feet)

RH

Ground Lead Side

EB = 2 1/2″ Gate, 1 1/4″ Post EC = 2 1/2″ Gate, 1 1/2″ Post FB = 3″ Gate, 1 1/4″ Post FC = 3″ Gate, 1 1/2″ Post GB = 3 1/2″ Gate, 1 1/4″ Post GC = 3 1/2″ Gate, 1 1/2″ Post HB = 4″ Gate, 1 1/4″ Post HC = 4″ Gate, 1 1/2″ Post
2C = 1/0 Stranded 2G = 2/0 Stranded 2Q = 4/0 Stranded 9F = Copper-Clad Steel #9, 19-Strand
LH = Left Hand RH = Right Hand

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

2

North America +1.800.753.9221 Option 1 ­ Customer Care Option 2 ­ Technical Support

Europe Netherlands: +31 800-0200135 France: +33 800 901 793

Europe Germany: 800 1890272 Other Countries: +31 13 5835404

APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500

Our powerful portfolio of brands:

nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER

© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of

3

their respective owners.

nVent reserves the right to change specifications without notice.