THE HEARTH Smokeless Fire Pit
Product Information
The Urban Fire Pit is a versatile outdoor cooking product that
comes with a BBQ Nation package, fire starters, an adjustable
swivel blade, a grill, searing attachment, three side walls, three
air channel covers, two legs, one hearth leg, a base plate, and a
hardware pack. The product also includes a 4-pack of 100%
all-natural Fatwood firestarters to get you started.
Product Usage Instructions
If you have any questions or issues with damaged or missing
parts, please contact YardCraft, the distributor of Urban Fire
products, at (717) 690-1587 or [email protected].
Assembly Instructions:
- Locate 3 Air Channel Covers (A) and all 3 legs (L & HL),
and assemble each component as shown in Fig. 1 - Lift the Base Plate (B) approximately 3 inches, as shown in
Fig. 2 - Carefully fold the legs (L & HL) and the Air Channel Covers
(A) towards each other until it stops, as shown in Fig. 3 - Lower the assembly into the appropriate slots on the Base Plate
(B), starting with the front two prongs of part (A), as shown in
Fig. 4 - When both sets of prongs on the Air Channel Cover (A) are
lowered into the Base Plate (B), slowly pivot leg (L or HL) as
shown in Fig. 5. This will lock the Air Channel Cover (A) to the
leg and Base Plate (B) - Repeat steps 3 thru 5 for the remaining leg and cover
assemblies, as shown in Fig. 6 - Insert the tabs on the Side Wall (W) into one of the legs, as
shown in Fig. 7. Be sure to keep the Side Wall raised until the
next step - Insert the opposite tabs into the second leg and gently lower
the Side wall (W) all the way down, as shown in Fig. 8. A light tap
with a rubber mallet or your palm may be required to snap the
second set of tabs into the slots. - Repeat Steps # 6-8 for the remaining Side Walls (W), as shown
in Fig. 9 - Locate the Top Ring (T) and lower it over the legs, as shown in
Fig. 10. Be sure to align the Grilling Pole hole on the Top Ring
(T) with The Hearth Leg (HL). - Use the provided bolts (Q) to fasten the Top Ring (T) to each
Leg (L & F) using a flat head screwdriver, as shown in Fig. 11.
You may need to push/pull the legs while fastening for proper
alignment.
Note: You may have to realign some of the assemblies after
completion due to shifting. An optional Snap Cap (S) is provided to
cover the hole used for the Urban Fire Adjustable Swivel Grill.
Congratulations! You have successfully assembled the Urban Fire
Pit.
Questions? Issues with Damaged or Missing Parts?
In order to best assist you, please contact YardCraft, the trusted distributor of Urban Fire products, NOT a third party retailer, with any questions regarding our products, damages,
missing parts, or replacement parts. This will help you get what you need as quickly as possible! Call us at (717) 690-1587, or Email us at [email protected]
1
The Hearth is unlike any other fire pit on the market. The Hearth is fully collapsible, making it easier to pack up for easy storage, or on the go. We used science to create a better atmosphere for you and your family around the fire. The Hearth pulls air in from three sources: protected air holes in the base, through hollow legs, and the top of each wall. As it rises through the leg, the air becomes super heated as your fire’s internal temperature reaches up to 1,500°F. The super heated air is expelled through the top, right under the top cap, mixing with the smoke coming off the fire. This ignites a secondary burn of the smoke, nearly eliminating all visible fumes coming from your fire pit. Add any of our accessories like the Adjustable Swivel Grill or The BladeTM Searing Attachment. With The Hearth, take your fire wherever you roam!
BBQ Nation package
Fire starters
ADJUSTABLE SWIVEL
the blade
more to come!
GRILL
Searing attachment
2
(t) Top Ring
(l) UF Leg (x2)
(w) Side walls (3)
(a) air channel
Covers (3)
(hl) Hearth Leg
hardware pack
(b) base plate
First Fire’s on Us!
4 pack of 100% all natural, Fatwood firestarters
3
Figure 1
Figure 2
Step1: Locate 3 Air Channel Covers (A) and all 3 legs (L & HL), and assemble each component as shown in Fig. 1
Step2: Lift the Base Plate (B) approximately 3 inches, as shown in Fig. 2
Note: It may help to place one end of the base plate on your foot to help support it for the next step.
Figure 3
Figure 4
Step3: Carefully fold the legs (L & HL) and the Air Channel Covers (A) towards each other until it stops, as shown in Fig. 3
Step4: Lower the assembly into the appropriate slots on the Base Plate (B), starting with the front two prongs of part (A), as shown in Fig. 4
4
Figure 5
Figure 6
Step5: When both sets of prongs on the Air Channel Cover (A) are lowered into the Base Plate (B), slowly pivot leg (L or HL) as shown in Fig. 5. This will lock the Air Channel Cover (A) to the leg and Base Plate (B).
Step6: Repeat steps 3 thru 5 for the remaining leg and cover assemblies, as shown in Fig. 6
Note: You may have to realign some of the asssemblies after completion due to shifting.
Figure 7
Figure 8
Step7: Insert the tabs on the Side Wall (W) into one of the legs, as shown in Fig. 7
Note: Be sure to keep the Side Wall raised until the next step.
Step8: Insert the opposite tabs into the second leg and gently lower the Side wall (W) all the way down, as shown in Fig. 8
Note: A light tap with a rubber mallet or your palm may be required to snap the second set of tabs into the slots.
5
Figure 9
Figure 10
Step9: Repeat Steps # 6-8 for the remaining Side Walls (W), as shown in Fig. 9
Step10: Locate the Top Ring (T) and lower it over the legs, as shown in Fig. 10
Note: Be sure to align the “Grilling Pole” hole on the Top Ring (T) with “The Hearth” Leg (HL).
Figure 11
Step11: Use the provided bolts (Q) to fasten the Top Ring (T) to each Leg (L & F) using a flat head screwdriver, as shown in Fig. 11
Note: You may need to push/pull the legs while fastening for proper alignment. Note: An optional Snap Cap (S) is provided to cover the hole used for the Urban Fire Adjustable Swivel Grill
6
congratulations!
you have succesfully assembled the hearth Fire pit!
7
