Kettler 0393902-0200 Medium Aluminium Storage Box Instruction Manual

0393902-0200 Medium Aluminium Storage Box

Medium Aluminium Storage Box

The Medium Aluminium Storage Box is a garden furniture product
that comes with a top cover, bottom shelf, handle holder, and
handle. The product is made of aluminium, which makes it
lightweight and easy to move around. The storage box is designed to
provide additional space to store garden tools and other outdoor
equipment. It is important to keep this booklet for future
reference as it contains important information regarding the use
and care of the garden furniture.

Parts List

  • A1 Side Plate Short x1
  • A2 Side Plate Short x1
  • B1 Side Plate Long x1
  • B2 Side Plate Long x1
  • C Bottom Shelf x1
  • D Top Cover x1
  • E Washer x16
  • F Bolt M6 x 15(mm) x6
  • G Bolt M6 x 45(mm) x2
  • H Bolt Cap x14
  • I Allen Key x1
  • J Nut x2
  • K Nut Cover x2
  • L Wrench x1
  • M Bolt M6 x 20(mm) x2
  • N Bolt M6 x 10(mm) x4
  • O Handle Holder x1
  • P Handle x1
  • Q Spring Washer x2

Assembly Instructions

Before you begin assembling the Medium Aluminium Storage Box,
please read the following helpful advice:

  1. We suggest you spend a short time reading through this leaflet
    and then follow the simple step by step instructions.
  2. Do not discard any of the packaging until you have checked that
    you have all the parts and the pack of fittings.
  3. Assemble this product on a soft surface.
  4. To ensure an easier assembly, we strongly advise that all
    fittings are only finger tightened.

Follow the steps below to assemble the product:

Step 1: Assembly

Step 1

Attach A1 and A2 to EF and IH respectively, using bolts F and
washers E.

Step 2: Assembly

Step 2

Attach B1 and B2 to FE and IH respectively, using bolts F and
washers E.

Step 3: Assembly

Step 3

Attach C to EN and IH, using bolts M and washers E.

Step 4: Assembly

Step 4

Attach D to HIF, using bolts G, washers E, and nuts J.

Step 5: Assembly

Step 5

Attach E to EN and IH, using bolts M, washers E, bolt caps H,
and nuts J.

Step 6: Assembly

Step 6

Attach P to O, using bolts N, washers Q, and wrench L.

Step 7: Assembly

Step 7

Attach the handle holder O to the top cover D, using bolts N,
washers Q, and wrench L. Attach the handle P to the handle holder
O.

Step 8: Finished

Step 8

Your Medium Aluminium Storage Box is now assembled and ready to
use.

Maintenance and Care Instructions

To keep your Medium Aluminium Storage Box in good condition,
please follow the maintenance and care instructions below:

  • Do not use sunscreens or oil-based products on the
    painted/varnished surfaces as they can damage them.
  • If the surface of your Kettler leisure furniture comes into
    contact with sunscreens, clean it without delay as described above.
    Only in this way can lasting discoloration of the surface by the
    ingredients of the sunscreen be prevented.

Warranty for Home Use

This product comes with a 3-year warranty against manufacturing
faults. This warranty applies to domestic use only and does not
cover commercial use, misuse, or accidental damage. To validate
your warranty, register at www.kettler.co.uk and quote the product
code from the front of this booklet.

Assembly Instructions
Medium Aluminium Storage Box
0393902-0200
IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.
Nov 2022

Parts List

A1 Side plateshort

A2 Side plateshort

B1 Side plate-long

B2 Side plate-long

C Bottom shelf

x1

x1

x1

x1

x1

D Top cover

E Washer

F Bolt M6 x 15(mm)

G Bolt M6 x 45(mm)

H Bolt cap

x1

x16

x6

x2

x14

I Allen Key

J Nut

K Nut Cover

L Wrench

M Bolt M6 x 20(mm)

x1

x2

x2

x1

x2

N Bolt M6 x 10(mm)
x4

O Handle holder
x1

P Handle
x1

Q Spring washer
x2

Do not discard any of the packaging
until you have checked that you have all the parts and the pack of fixings.

Assembly

Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
3. Assemble this product on a soft surface. 4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened
during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened. 5. We recommend a periodic check on all fixing points to make sure they remain fully tightened. 6. Keep fittings out of children’s reach. 7. Do not use any other tools other than those recommended to build this product. 8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler. 9. In the unlikely event that this product has missing or damaged parts, please visit our website www.kettler.co.uk/shop.

1
A1

EF IH A2
EN I H

B1

Assembly
2

FE I H
C

3
B2

Assembly
4

HIF E

5

EN I H

EN I H

Assembly

6

PE Q

M I

O

H

O

7
D

H

G

I

J

E

K

E

L

Assembly
8
Finished

Maintenance and Care Instructions
· This product may only be used for its intended purpose for residential premises. Any other uses may affect the warranty.
· Kettler furniture is designed to be left outdoors all year round. · We recommend you clean your Kettler furniture at the beginning and end of the season. · To clean your Kettler furniture, use warm soapy water only. Never use abrasive chemicals or
cleaning agents. To lengthen the life of your product we recommend the Kettler Multi-surface cleaner from our after-care range available to purchase from our website. Tree sap and bird droppings should be cleaned off immediately. · Kettler furniture can be covered ­ we recommend that you use Kettler tailored covers (where available) or universal breathable covers. · Moving parts such as locking mechanisms, catches and joints need to be lubricated where necessary. · This product is 100% recyclable. At the end of the products life, please dispose of responsibly. · Colours may vary slightly
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens and oil based products.If the surface of your Kettler leisure furniture comes into contact with sunscreens, the surface is to be cleaned without delay as described above. Only in this way can lasting discolouration of the surface by the ingredients of the sunscreen be prevented.

For Your Safety
· This product may only be used for its intended purpose as furniture for residential properties. · Check all components regularly for correct function, damage and loose connections especially
at the start of the season and at 1-2 month intervals dependent on use. · Damaged components may endanger your safety or shorten the life of the product. Replace all
damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop · Kettler will not be responsible for damaged caused by improper use.
Attention
· Whilst assembling this product keep out of the reach of children. (Choking hazard ­ contains small parts)
· Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around.
· Always dispose of packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
· We reserve the right to make changes for technical reasons.

www.kettler.co.uk

Warranty For Home Use
This product is covered by a 3 year warranty against manufacturing faults. This warranty applies to domestic use only. It does not cover commercial use,
mis-use or accidental damage.
To validate your warranty, register at www.kettler.co.uk and quote the product code from the front of
this booklet.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals