KALLSJÖN Pillar tap Tpkran
Product Information
The product is a tap/mixer that requires installation according to local construction and plumbing regulations. The package includes user manuals/instructions in multiple languages, providing guidance on installation and usage.
Installation Requirements
- Installation must comply with local construction and plumbing regulations.
- If unsure, contact a professional for assistance.
Usage Instructions
- Switch off the main shut-off valve before changing the tap/mixer.
- If using a garden hose to connect to the water supply, note that the water is not suitable for drinking.
Product Specifications
- Maximum diameter: 50mm
- Maximum pressure: 10 bar / 145 psi
Note: The pressure range varies based on the country, it is recommended to refer to the user manual for the specific pressure range in your country.
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switch off main shut-off valve before changing tap.
Tool
Assembly
If using a garden hose to connect to the water supply the water is not suitable for drinking.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before connecting the product to the water supply system, water should be flushed through the system to remove all debris.
Outdoor Use
Before use: Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes.
Then screw the Aerator/Flow Guide back in place.
Ensure that it is tight to prevent removal by hand.
Check at regular intervals to make sure that the installation is not leaking. 
