R Roshetta 403358 Sense Kitchen Hoods Instruction Manual (+ PDF)

403358 SENSE Kitchen Hoods

Instructions Change of the base unit
Safety and recommended tools

Contents hide

1 SAFETY AND RECOMMENDED TOOLS

2 Wall-mounted

3 CONTENT IN DELIVERY

4 REMOVAL OF CURRENT BASE UNIT

5 INSTALLATION OF NEW BASE UNIT

6 INSTALLATION

7 CONTENT IN DELIVERY

8 REMOVAL OF CURRENT BASE UNIT

9 Documents / Resources

9.1 References

10 Related Posts

SAFETY AND RECOMMENDED TOOLS

SAFETY

Read, understand and follow the instructions to avoid personal injury and product damage.

Warning levels
Danger indicates that an accident will occur if the instructions are not followed. The accident leads to serious personal injury or possibly death.
Warning indicates that an accident may occur if the instructions are not followed. The accident can lead to serious personal injury or possibly death.
Caution indicates that an accident may occur if the instructions are not followed. The accident can lead to personal injury.

Maintenance
Electrical connection to 230 VAC with protective earth. Cut the power to the product by the circuit breaker before installation and maintenance.
To minimize the risk of accidents, permanent installation, replacement of cable racks or another type of connection must be carried out by an authorized electrician.
LED lights should be replaced with the original spare parts. Please contact Customer service, see section Service and warranty.

Note. If the product shall be supplemented with a Power Control Unit (PCU) see separate section.
Caution!
Class 3R laser is used as a component for the air quality sensor system. Service of the sensor unit should be done by Class 3R laser authorized personnel. Please contact Customer service, see section Service and warranty. In case of damage exposing the visible red laser beam, avoid direct eye exposure to the beam and do not inspect it with optical instruments.