Iconic Nordic Rooms Unit 40 Air Wood Instruction Manual (+ PDF)

ICONIC NORDIC ROOMS Unit 40 Air Wood

Contents hide

8 Documents / Resources

8.1 References

9 Related Posts

SAFETY REGULATIONS

Goggles are recommended to protect your eyes.

We recommend that two persons are present at the installation.
Use safety shoes during installation.
Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b) or in structures that have been tested and approved for fastenings, for example a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se. Sealing materials must be fi xed to the underlying layer and must be waterproof, mould-resistant and age-resistant.

Dimension

TOOLS

INSTALLATION

MAINTENANCE ADVICE

To learn more, please visit inr.se If in doubt regarding your choice of cleaning method, test first on a small, inconspicuous area.
Washbasin, porcelain
Clean with a slightly damp cloth and a mild cleaning agent. Avoid hard abrasives and caustic soda.

Lacquered wooden surfaces
Cupboard doors, drawers and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia or other strong solvents. Water and splashes should be wiped off immediately with a dry cloth.

Worktop, Corian®
In terms of daily cleaning, it is quite sufficient to wipe down Corian® with a damp cloth. Water and washing-up liquid will remove most stains and grease. The entire surface should be cleaned periodically in order to maintain an even sheen and prevent blotches. Corian® is repairable in the event of mechanical damage to the surface.

Worktop, Dekton®
We recommend regular cleaning with a soft sponge, warm water and Grön Såpa or a similar cleaning agent with neutral pH. For tough stains – wipe down the surface with a cleaning agent and apply a little extra elbow grease, then rinse with warm water.

Metal surfaces
For metal surfaces, use a slightly damp cloth and a mild detergent solution.