SG Series Cutting Plotter with Servo Motor

Cutting Plotter

The Cutting Plotter is a versatile and user-friendly device
designed for cutting various materials such as self-adhesive
stickers and labels. It is available in different models: SGC720II,
C1400II, C1800II, SGC720IIP, C1400IIP, C1800IIP. The plotter
features a direct USB connection, allowing for easy plug and play
functionality without the need for USB drivers. It is compatible
with Windows 7, 8, and 10 operating systems, as well as Mac systems
with Dragon Cut software.

Main Features

• High force cutting head with 4 wheels
• Aluminum alloy construction with ABS end caps
• Welded steel stand
• Available with ARM for fully automatic contour cutting

Specifications

Power and Working Environment Requirements

The Cutting Plotter requires a power source of 100V-240V,
50/60Hz, and consumes 150W of power. It operates within a
temperature range of +5 to +35°C (41-95°F) and a humidity range of
30% to 75% (non-condensing).

Contact Information

For further inquiries or support, please contact Hefei Saga
Computer Numerical Control Co., Ltd. at:

Tel: +86-551-63444544

Address: Block7 Liando U-valley, Jilin Crossing of Fanhua
Avenue, Baohe District, Hefei, Anhui Province, PRC

Website: www.sagacnc.com

WeChat Official Account: [WeChat Official Account]

Product Usage Instructions

1. Connect the Cutting Plotter to your computer using the provided
   USB cable.
2. If you are using a Windows operating system (Windows 7, 8, or
   10), ensure that the plotter is compatible with Dragon Cut
   software. If you are using a Mac system, make sure to install
   Dragon Cut software for compatibility.
3. If you prefer to use Corel Draw or Illustrator, connect the
   plotter to your computer using an SD card.
4. Ensure that the power source is compatible with the Cutting
   Plotter (100V-240V, 50/60Hz).
5. Place the material to be cut on the plotter’s sheet and adjust
   it according to the maximum cutting size specified for your
   model.
6. Launch the appropriate software (Dragon Cut, Corel Draw, or
   Illustrator) and select the desired design or create a new
   one.
7. Configure the cutting parameters such as cutting speed and
   force according to your requirements.
8. Send the design to the Cutting Plotter for cutting. Ensure that
   the plotter is properly connected and recognized by the
   software.
9. Monitor the cutting process and make any necessary adjustments
   if needed.
10. Once the cutting is completed, remove the cut material from the
    plotter’s sheet and proceed with further processing or application
    as desired.

Cutting Plotter

SGC720II / C1400II / C1800II SGC720IIP / C1400IIP / C1800IIP

Direct USB, plug and play, no USB drivers required Works on Mac systems with Dragon Cut software
windows 7 / 8 and 10 compatible

Servo Motor

Application:Self-adhesive sticker , label etc.

MAIN FEATURES

CUTTING PLOTTER www.sagacnc.com

PROBING MYSTERIES ADVOCATING
SCIENCE

High force cutting head with 4 wheels Aluminum alloy construction, ABS end caps, welded steel stand Available with ARM for fully automatic contour cutting

CUTTING SAMPLES

SPECIFICATIONS

Model Name Maximum sheet size Maximum cutting size

SG-C720II/C720IIP 720mm 610mm

SG-C1400II/C1400IIP 1400mm 1295mm

SG-C1800II/C1800IIP 1800mm 1695mm

Minimum cutting character

About 5mm²

Mechanical resolution Repeat precision

0.02mm 0.082mm

Maximum linear cutting speed

960mm/s

Maximum cutting force Cutting control system
Motor speed CPU
Package dimensions Actual dimensions Gross/Net weight

750g

DC Servo

0-3000RPM

64DSP

L1030mm×W350mm×H490mm L1710mm×W350mm×H490mm L2100mm×W400mm×H550mm

L930mm×W230mm×H285mm L1610mm×W230mm×H285mm L2010mm×W230mm×H285mm

27±10kg/25±10kg

42±10kg/35±10kg

68±10kg/47±10kg

Software and compatibility

Connectivity

USB/RS232

Software and compatibility

Dragon Cut, for computer, compatible for Windows7,8,10 (USB direct connection to the computer)

Corel Draw/ Illustrator Plug-in (SD direct connection to the computer)

Power and working environment requirements

Power source Power

100V240V,50/60Hz 150W

Operation environment

Temperature +5 to +35 (Fahrenheit 41-95),Humidity 30% -75% (Non-condensing)

Stand pocket

Included

Included

Included

This parameter is subject to change without prior notice. The company reserves the right of final interpretation

Tel: +86-551-63444544
HEFEI SAGA COMPUTER NUMERICAL CONTROL Co.,Ltd. AddressBlock7 Liando U-valley,Jilin Crossing of Fanhua Avenue, Baohe District, Hefei, Anhui Province ,PRC

Website

WeChat Official Account

References

• Vinyl Cutting Plotter and Digital Cutting Manufacturers