GDR 18V-LI MF Cordless Screwdriver
Product Information:
- Product Name: GDR | GDS | GDX Professional
- Voltage Options: 14.4 V-LI | 18 V-LI
- Manufacturer: Robert Bosch GmbH
- Division: Power Tools Division
- Address: 70745 Leinfelden-Echterdingen Germany
- Website: www.bosch-pt.com
- Manual Language Options: de, en, fr, es, pt, it, nl, uk, ro,
bg - Manual Part Number: 1 609 92A 00R (2012.12) O / 195 UNI
Product Usage Instructions:
- Read all safety warnings and instructions provided in the
manual before using the product. - Keep the work area clean and well-lit to avoid accidents.
- Avoid operating the product in explosive atmospheres such as in
the presence of flammable liquids, gases or dust. - Keep children and bystanders away while operating the product
to avoid distractions that could cause loss of control. - Ensure that the power tool plugs match the outlet and never
modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools to reduce the risk of electric
shock. - Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges, and refrigerators to reduce the risk of
electric shock. - Do not expose the product to rain or wet conditions to minimize
the risk of electric shock. - Avoid abusing the cord by using it for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp
edges, and moving parts to reduce the risk of electric shock. - Refer to the manual for specific instructions on handling and
transport of Li-Ion batteries.
OBJ_DOKU-14451-004.fm Page 1 Wednesday, December 12, 2012 10:33 AM
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany www.bosch-pt.com 1 609 92A 00R (2012.12) O / 195 UNI
Downloaded from www.Manualslib.com manuals search engine
GDR | GDS | GDX Professional
14,4 V-LI | 18 V-LI
de Originalbetriebsanleitung en Original instructions fr Notice originale es Manual original pt Manual original it Istruzioni originali nl Oorspronkelijke
gebruiksaanwijzing da Original brugsanvisning sv Bruksanvisning i original no Original driftsinstruks fi Alkuperäiset ohjeet
el tr Orijinal iletme talimati pl Instrukcja oryginalna cs Pvodní návod k pouzívání sk Pôvodný návod na pouzitie hu Eredeti használati utasítás ru
uk
ro Instruciuni originale bg
sr Originalno uputstvo za rad sl Izvirna navodila hr Originalne upute za rad et Algupärane kasutusjuhend lv Instrukcijas oriinlvalod lt Originali instrukcija ar fa
OBJ_BUCH-832-004.book Page 4 Wednesday, December 12, 2012 10:31 AM 4 |
12
3
9 8 7
10 6
A GDR …
12
11
4
GDR 18 V-LI
5
Professional
B GDS …
1 14
12 13
13
1 609 92A 00R | (12.12.12)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 5 Wednesday, December 12, 2012 10:31 AM 5 |
C GDX …
D
12 14
7
7
11
12
13
13
E
15 16
1 609 92A 00R | (12.12.12)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 12 Wednesday, December 12, 2012 10:31 AM
12 | English
Deutschland
Robert Bosch GmbH Servicezentrum Elektrowerkzeuge Zur Luhne 2 37589 Kalefeld Willershausen Unter www.bosch-pt.com können Sie online Ersatzteile bestellen oder Reparaturen anmelden. Kundendienst: Tel.: (0711) 40040480 Fax: (0711) 40040481 E-Mail: [email protected] Anwendungsberatung: Tel.: (0711) 40040480 Fax: (0711) 40040482 E-Mail: [email protected]
Österreich
Tel.: (01) 797222010 Fax: (01) 797222011 E-Mail: [email protected]
Schweiz
Tel.: (044) 8471511 Fax: (044) 8471551 E-Mail: [email protected]
Luxemburg
Tel.: +32 2 588 0589 Fax: +32 2 588 0595 E-Mail: [email protected]
Transport
Die enthaltenen Li-Ionen-Akkus unterliegen den Anforderungen des Gefahrgutrechts. Die Akkus können durch den Benutzer ohne weitere Auflagen auf der Straße transportiert werden. Beim Versand durch Dritte (z.B.: Lufttransport oder Spedition) sind besondere Anforderungen an Verpackung und Kennzeichnung zu beachten. Hier muss bei der Vorbereitung des Versandstückes ein Gefahrgut-Experte hinzugezogen werden.
Versenden Sie Akkus nur, wenn das Gehäuse unbeschädigt ist. Kleben Sie offene Kontakte ab und verpacken Sie den Akku so, dass er sich nicht in der Verpackung bewegt. Bitte beachten Sie auch eventuelle weiterführende nationale Vorschriften.
Entsorgung
Elektrowerkzeuge, Akkus, Zubehör und Verpackungen sollen einer umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge und Akkus/Batterien nicht in den Hausmüll! Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2002/96/EG müssen nicht mehr gebrauchsfähige Elektrowerkzeuge und gemäß der europäischen Richtlinie 2006/66/EG müssen defekte oder verbrauchte Akkus/Batterien getrennt gesammelt und einer umweltgerechten Wiederverwendung zugeführt werden.
1 609 92A 00R | (12.12.12)
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei: Deutschland Recyclingzentrum Elektrowerkzeuge Osteroder Landstraße 3 37589 Kalefeld Schweiz Batrec AG 3752 Wimmis BE
Akkus/Batterien:
Li-Ion: Bitte beachten Sie die Hinweise im Abschnitt ,,Transport”, Seite 12.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 13 Wednesday, December 12, 2012 10:31 AM
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
English | 13
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Safety Warnings for Impact Wrenches
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture. Danger of explosion.
In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
Bosch Power Tools
1 609 92A 00R | (12.12.12)
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 14 Wednesday, December 12, 2012 10:31 AM
14 | English
Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload.
Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. When using other batteries, e.g. imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries.
Product Description and Specifications
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
While reading the operating instructions, unfold the graphics page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts within the respective range of dimension.
Product Features
The numbering of the product features refers to the illustration of the machine on the graphics page.
1 Tool holder 2 Locking sleeve 3 Carrying strap 4 Belt clip* 5 Battery pack* 6 Battery unlocking button* 7 Rotational direction switch 8 On/Off switch 9 “PowerLight” 10 Handle (insulated gripping surface) 11 Screwdriver bit with ball catch* 12 Universal bit holder* 13 Screwdriver bit* 14 Application tool (e. g. an impact socket)* 15 Carbon brushes 16 Cover lid *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage No-load speed
V= min-1
Impact rate
min-1
Maximum torque, hard screwdriving
application according to ISO 5393
Nm
Bolt size
mm
Tool holder
Weight according to EPTA-Procedure
01/2003
kg
Cordless Impact Screwdriver
Article number
Rated voltage
V=
No-load speed Impact rate
min-1 min-1
Maximum torque, hard screwdriving
application according to ISO 5393
Nm
Bolt size
mm
Tool holder
Weight according to EPTA-Procedure
01/2003
kg
GDR 14,4 V-LI 3 601 JA1 4..
14.4 0 2800 0 3200
150* M6 M14 ¼” hexagon socket
1.5/1.7* GDS 14,4 V-LI 3 601 JA1 T..
14.4 0 2800 0 3200
170* M6 M16
½”
1.5/1.7*
GDR 18 V-LI 3 601 JA1 3..
18 0 2800 0 3200
160* M6 M14 ¼” hexagon socket
1.6/1.8* GDS 18 V-LI 3 601 JA1 S..
18 0 2800 0 3200
180* M6 M16
½”
1.6/1.8*
1 609 92A 00R | (12.12.12)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 15 Wednesday, December 12, 2012 10:31 AM
Cordless Impact Screwdriver
Article number
Rated voltage No-load speed Impact rate
V= min-1 min-1
Maximum torque, hard screwdriving
application according to ISO 5393
¼” hexagon socket
Nm
½”
Nm
Bolt size
mm
Tool holder
Weight according to EPTA-Procedure
01/2003
kg
* Value dependent of the battery pack being used
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are: Sound pressure level 96 dB(A); Sound power level 107 dB(A). Uncertainty K =3 dB. Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745: Impact tightening of fasteners of the maximum capacity of the tool: ah=12 m/s2, K=1.5 m/s2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at: Robert Bosch GmbH, PT/ETM9, D-70745 Leinfelden-Echterdingen
Bosch Power Tools
GDX 14,4 V-LI 3 601 JB8 0..
14.4 0 2800 0 3200
English | 15
GDX 18 V-LI 3 601 JB8 1..
18 0 2800 0 3200
150* 170 M6 M16 ¼” hexagon socket / ½”
1.5/1.7*
Dr. Egbert Schneider Senior Vice President Engineering
160* 180 M6 M16 ¼” hexagon socket / ½”
1.6/1.8*
Helmut Heinzelmann Head of Product Certification PT/ETM9
Robert Bosch GmbH, Power Tools Division D-70745 Leinfelden-Echterdingen 16.11.2012
Assembly
Battery Charging
Use only the battery chargers listed on the accessories page. Only these battery chargers are matched to the lithium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time.
The Lithium-Ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not damage the battery.
The Lithium-Ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates. Do not continue to press the On/Off switch after the
machine has been automatically switched off. The battery can be damaged.
The battery is equipped with a NTC temperature control which allows charging only within a temperature range of between 0 °C and 45 °C. A long battery service life is achieved in this manner.
Observe the notes for disposal.
Removing the battery The battery 5 is equipped with two locking levels that should prevent the battery from falling out when pushing the battery unlocking button 6 unintentionally. As long as the battery is inserted in the power tool, it is held in position by means of a spring.
1 609 92A 00R | (12.12.12)
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 16 Wednesday, December 12, 2012 10:31 AM
16 | English
To remove the battery 5, press the unlocking button 6 and pull out the battery toward the front. Do not exert any force.
Changing the Tool (see figure A– C)
Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is danger of injury when unintentionally actuating the On/Off switch.
Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
GDR 14,4 V-LI/GDR 18 V-LI/GDX 14,4 V-LI/GDX 18 V-LI: Inserting Pull the locking sleeve 2 forward, push the insert tool to the stop into the tool holder 1 and release the locking sleeve 2 to lock the insert tool. Use only screwdriver bits with ball catch 11 (DIN 3126-E6.3). Other screwdriver bits 13 can be used with a universal bit holder with ball catch 12. Removing Pull the locking sleeve 2 forward and remove the insert tool. GDS 14,4 V-LI/GDS 18 V-LI/GDX 14,4 V-LI/GDX 18 V-LI: When working with an application tool, pay attention
that the application tool is connected securely on the tool holder. When the application tool is not securely connected with the tool holder, it can come off during application. Slide the application tool 14 onto the square drive of the tool holder 1. However based on the system, if the application tool 14 appears wobbly after connecting securely on the tool holder 1; this has no influence on the function/safety.
Operation
Method of Operation
The tool holder 1 with the tool is driven by an electric motor via a gear and impact mechanism. The working procedure is divided into two phases: Screwing in and tightening (impact mechanism in action). The impact mechanism is activated as soon as the screwed connection runs tight and thus load is put on the motor. In this instance, the impact mechanism converts the power of the motor to steady rotary impacts. When loosening screws or nuts, the process is reversed.
1 609 92A 00R | (12.12.12)
Starting Operation
Inserting the battery Use only original Bosch lithium ion batteries with the
voltage listed on the nameplate of your power tool. Using other batteries can lead to injuries and pose a fire hazard. Set the rotational direction switch 7 to the centre position to protect the power tool against accidental starting. Insert the charged battery 5 from the front into the base of the power tool until the battery is securely locked.
Reversing the rotational direction (see figure D) The rotational direction switch 7 is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch 8 actuated. Right rotation: For driving in screws and tightening nuts, press the rotational direction switch 7 through to the left stop. Left Rotation: For loosening and unscrewing screws and nuts, press the rotational direction switch 7 through to the right stop.
Switching On and Off To start the machine, press the On/Off switch 8 and keep it pressed. The power light 9 lights up when the On/Off switch 8 is slightly or completely pressed, and allows the work area to be illuminated when lighting conditions are insufficient. To switch off the machine, release the On/Off switch 8.
To save energy, only switch the power tool on when using it.
Adjusting the Speed
The speed of the switched on power tool can be variably adjusted, depending on how far the On/Off switch 8 is pressed. Light pressure on the On/Off switch 8 results in a low rotational speed. Further pressure on the switch results in an increase in speed.
Working Advice
Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off.
The torque depends on the impact duration. The maximum achieved torque results from the sum of all individual torques achieved through impact. The maximum torque is achieved after an impact duration of 610 seconds. After this duration, the tightening torque is increased only minimally.
The impact duration is to be determined for each required tightening torque. The actually achieved tightening torque is always to be checked with a torque wrench.
Screw Applications with Hard, Spring-loaded or Soft Seat
When in a test, the achieved torques in an impact series are measured and transferred into a diagram, resulting in the curve of a torque characteristic. The height of the curve corresponds with the maximum reachable torque, and the steepness indicates the duration in which this is achieved.
A torque gradient depends on the following factors: Strength properties of the screws/nuts
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 17 Wednesday, December 12, 2012 10:31 AM
Type of backing (washer, disc spring, seal) Strength properties of the material being screwed/bolted
together Lubrication conditions at the screw/bolt connection
The following application cases result accordingly: A hard seat is given for metal-to-metal screw applications
with the use of washers. After a relatively short impact duration, the maximum torque is reached (steep characteristic curve). Unnecessary long impact duration only causes damage to the machine.
English | 17
A spring-loaded seat is given for metal-to-metal screw applications, however with the use of spring washers, disc springs, studs or screws /nuts with conical seat as well as when using extensions.
A soft seat is given for screw applications, e. g., metal on wood or when using lead washers or fibre washers as backing.
For a spring-loaded seat as well as for a soft seat, the maximum tightening torque is lower than for a hard seat. Also, a clearly longer impact duration is required.
Reference Values for Maximum Screw/Bolt Tightening Torques
Calculated from the tensional cross-section; utilization of the yield point 90 % (with friction coefficient total = 0.12). As a control measure, always check the tightening torque with a torque wrench.
Property Classes accord- Standard Screws/Bolts
High-strength Bolts
ing to DIN 267
3.6 4.6 5.6 4.8 6.6 5.8 6.8 6.9 8.8 10.9 12.9
M 6
2.71 3.61 4.52 4.8 5.42 6.02 7.22 8.13 9.7 13.6 16.2
M 8
6.57 8.7 11 11.6 13.1 14.6 17.5 19.7 23 33 39
M 10
13 17.5 22 23 26 29 35 39 47 65 78
M 12
22.6 30 37.6 40 45 50 60 67 80 113 135
M 14
36 48 60 65 72 79 95 107 130 180 215
M 16
55 73 92 98 110 122 147 165 196 275 330
Tips Before screwing larger, longer screws into hard materials, it is advisable to predrill a pilot hole with the core diameter of the thread to approx. 2/3 of the screw length. Note: Pay attention that no metal particles enter the power tool.
Belt Clip With the belt clip 4, the machine can be hung onto a belt. The user has both hands free and the machine is always at hand.
Recommendations for Optimal Handling of the Battery Protect the battery against moisture and water.
Store the battery only within a temperature range between 0 °C and 50 °C. As an example, do not leave the battery in the car in summer.
Occasionally clean the venting slots of the battery using a soft, clean and dry brush.
A significantly reduced working period after charging indicates that the battery is used and must be replaced.
Observe the notes for disposal.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is danger of injury when unintentionally actuating the On/Off switch.
For safe and proper working, always keep the machine and ventilation slots clean.
Replacing the Carbon Brushes (see figure E)
Check the length of the carbon brushes approx. every 2 3 months and replace the carbon brushes if required.
Never replace only a single carbon brush! Note: Use only carbon brushes supplied by Bosch and intended specifically for your product. Unscrew the caps 16 using a suitable screwdriver. Replace the spring-loaded carbon brushes 15 and screw
the caps back on again.
If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www.bosch-pt.com Bosch’s application service team will gladly answer questions concerning our products and their accessories.
Bosch Power Tools
1 609 92A 00R | (12.12.12)
Downloaded from www.Manualslib.com manuals search engine
OBJ_BUCH-832-004.book Page 18 Wednesday, December 12, 2012 10:31 AM
18 | English
Great Britain
Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ Tel. Service: (0844) 7360109 Fax: (0844) 7360146 E-Mail: [email protected]
Ireland
Origo Ltd. Unit 23 Magna Drive Magna Business Park City West Dublin 24 Tel. Service: (01) 4666700 Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169 Customer Contact Center Inside Australia: Phone: (01300) 307044 Fax: (01300) 307045 Inside New Zealand: Phone: (0800) 543353 Fax: (0800) 428570 Outside AU and NZ: Phone: +61 3 95415555 www.bosch.com.au
Republic of South Africa Customer service Hotline: (011) 6519600
Gauteng BSC Service Centre 35 Roper Street, New Centre Johannesburg Tel.: (011) 4939375 Fax: (011) 4930126 E-Mail: [email protected]
KZN BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: (031) 7012120 Fax: (031) 7012446 E-Mail: [email protected]
Western Cape BSC Service Centre Democracy Way, Prosperity Park Milnerton Tel.: (021) 5512577 Fax: (021) 5513223 E-Mail: [email protected]
1 609 92A 00R | (12.12.12)
Bosch Headquarters Midrand, Gauteng Tel.: (011) 6519600 Fax: (011) 6519880 E-Mail: [email protected]
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The user can transport the batteries by road without further requirements. When being transported by third parties (e.g.: air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe possibly more detailed national regulations.
Disposal
The machine, rechargeable batteries, accessories and packaging should be sorted for environmentalfriendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste! Only for EC countries:
According to the European Guideline 2002/96/EC, power tools that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Batteries no longer suitable for use can be directly returned at:
Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ Tel. Service: (0844) 7360109 Fax: (0844) 7360146 E-Mail: [email protected] Battery packs/batteries:
Li-ion: Please observe the instructions in section “Transport”, page 18.
Subject to change without notice.
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
Select your country | Bosch Power Tools
