Chende LED Vanity Mirror Lights
Chende LED Vanity Mirror Lights
Specifications
- Material: Plastic
- Light fixture form: Vanity
- Room Type: Bathroom, Bedroom, Makeup room
- Power Source: AC
- Installation Method: Flush_mount
- Control Method: Touch
- Light Source Type: LED
- Shade Material: Plastic
- Voltage: 12 Volt
- Shape: Lights kit
- Lighting Method: Up/Down Light
- Wattage: 18 watts
- Mounting Type: Paste directly
- Plug Format: A- US style
- Switch Style: Touch
- Brand: Chende
Introduction
A form of lighting fixture called an LED vanity mirror light is made to be put on or around a mirror, usually in a bathroom or dressing area. To give better illumination for activities like applying makeup, shaving, or hair styling, these lamps are employed. LED vanity mirror lights can be fixed directly on the mirror, on a nearby wall or ceiling, or along the top or bottom border of the mirror. They are frequently positioned around the mirror’s perimeter. To accommodate various aesthetics and needs, they are frequently offered in a variety of sizes and styles. LED lights are a well-liked option for vanity mirror lighting because they are durable and cost-effective.
There are several reasons for this. First, an LED vanity mirror light is very easy to install. You can do it yourself without the help of a professional. Second, they are very energy efficient, so you won’t have to worry about high electricity bills. Third, they are durable and long-lasting, so you won’t have to worry about replacing them anytime soon. Last but not least, they are very affordable.
Unlike incandescent lights, which produce a lot of heat and require frequent replacement, LED lights are cool to the touch and last much longer. They don’t contain mercury or lead either, making them safer for your home and family. They also don’t give off any ultraviolet rays or infrared radiation.
This depends on the type of light you buy. Some lights come with a dimmer switch that allows you to adjust the brightness of the light depending on your needs. Other lights come with a remote control that lets you turn the light on and off without having to get up from your seat or bed. Still other lights have touch sensors that turn on when you touch them, saving you time and energy.
Dimmable lights let you adjust the brightness of the light according to your needs. Non-dimmable lights don’t allow this kind of adjustment.
Since it is a circuit board, LED bulbs cannot be changed in this manner. You must be able to solder, get an LED light that will fit inside the globe and plug it in, or purchase a second set to replace the burned one. However, LED lighting itself has a long lifespan. If they suddenly stop working, the wiring is usually at blame.
They have an adhesive patch, so I believe you can attach them to almost anything.
I believe mine is 110 volts. Having two prongs
The lights should dim if you tap and hold the power button. Simply tap and hold the power button once more if you wish to brighten the lights.
The light must be carefully removed, and the adhesive tape will probably remain in place. You must remove it by hand and clear any residue with glass cleaner.
The LED vanity light kits can be applied to mirrors of various shapes. Its length and shape were adjustable.
The lights can be adjusted, so you may dim them by pressing the same switch that you use to turn them on and off. It’s possible that you mistakenly held down the switch for too long, dimming them. If you did that, you can brighten again by pressing the switch. Just an idea. So I did. My lighting is still on.
Sincerity dictates that all I did was remove my cables and duck tape them to the mirror’s back. Since they are clear, it is hardly noticeable and no mess is made.
