Cleer Audio Enduro 100 Wireless Bluetooth Headphone
Box Contents
Overview
- Press the power button for 2 seconds to turn on your ENDURO 100
- ENDURO 100 will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps on page 4)
- ENDURO 100 will automatically connect the last connected device if it is in range and available for pairing
- Find “Cleer ENDURO 100” on the Bluetooth device list
- Enjoy your ENDURO 100
Bluetooth Pairing
NFC 
- ENDURO 100 is OFF. Press the power button for 2 seconds to turn on your ENDURO 100
- Turn on NFC on your device and place it near the left ear cup
- ENDURO 100 is now paired
- For NFC enabled devices only
Pairing Mode
- ENDURO 100 is OFF. Press the power button until the LED blinks white & red
- Find “Cleer ENDURO 100” on the Bluetooth device list
- ENDURO 100 is now paired
Volume Control
- Volume up by one increment
- Volume increase continuously
- Volume down by one increment
- Volume decrease continuously
- Only active when ENDURO 100 is powered ON
- Music Play/Pause
- Call Pick/Hang up call
- Music Next track
- Music Previous track
- Trigger Siri (iOS devices only)
- Only active when ENDURO 100 Is powered ON
Line-in Connection
Hi-Res output is only available thru line-in connection Cleer USB-C to 3.5mm audio cable is for ENDURO 100 use only.
Charging
- Connect ENDURO 100 to a power source with the provided USB-C cable
- A 10-minute charge will give 12 hours of playtime. ENDURO 100 can be fully charged in 3 hours
LED Behavior
- Power on
- Power off
- Power on but not connected with any device Power on and connected with a device
- Pairing mode
- Battery low when not connected with any device Battery low when connected with a device Charging (battery level 0-49%)
- Charging (battery level 50-99%)
- Battery fully charged
Specifications
- Driver 40mm ironless” Driver
- Audio CODEC support SBC, AAC, aptx HD
- Frequency response range 20-40KHz (Line in)/ 20-20KHz (Bluetooth)
- Connections USB-C to 3.5mm for audio, USB-C to USB-A for charging
- Support BT 5.0, SPP v1.0, HFP v1.6, A2DP v1.3.1, AVRCP v1.6
- Charging A 10-minute charge will give 12 hours of playtime. ENDURO 100 can be fully charged in 3 hours
- Bluetooth transmission frequency range 2.402-2.480GHz
- Bluetooth transmission power: <4dBm
- Battery Rechargeable lithium-ion rectangle cell (3.7V)
- Playback time (BT) Up to 100 hours
- Weight 280 g
- Product Dimensions 2.72 x 1.38 x 3.07 inches
- Audio Performance 40mm Ironless Driver
Warranty
Cleer Limited Warranty
Cleer Limited warrants this product against defects in material or workmanship for (1) year as set forth below when purchased directly from Cleer Limited or a Cleer Limited retailer. Pursuant to this Limited Warranty, Cleer Limited will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies.
Labor For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with new or refurbished product, product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.
Parts For a period of (1) year from the original date of purchase of the product (“Parts Warranty”), Cleer Limited will supply new or refurbished replacement parts in exchange for parts determined to be defective.
This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software.
Instructions To obtain warranty service, you must deliver the Product, freight prepaid, in either its original packaging or packaging affording an equal degree of protection to the original Cleer Limited retailer (point of purchase) or Cleer Limited Customer Service. It is your responsibility to backup any data, software or other materials you may have stored or preserved on your unit. It is unlikely that such data, software or other materials will be lost or reformatted during service and Cleer Limited will not be responsible for any such damage or loss. A dated purchase receipt from Cleer Limited or a Cleer Limited retailer is required. For specific instructions on how to obtain warranty service for your product, Visit the Cleer Limited website www.cleeraudio.com Following warranty service your original Product or a replacement Product will be returned to you as your Product was configured when originally purchased.
Repair/ Replacement Warranty This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original Limited Warranty period or for (90) days, whichever is longer. Any parts or product replaced under this Limited Warranty will become the property of Cleer Limited.
This Limited Warranty shall not apply to (a) consumable parts, such as batteries that are designed to diminish over time, unless failure has occurred due to a defect in materials or workmanship; (b) cosmetic damage, including but not limited to scratches, dents and broken plastic on ports; (c) defects caused by normal wear and tear or otherwise due to the normal aging of the device; (d) damage caused by accident, negligence, abuse, misuse, fire, earthquakes, acts of God or damage resulting from liquid outside of the approved levels; (e) damage caused by operating the device outside Cleer Limited published guidelines; (ij damage caused by service performed by anyone who is not a representative of Cleer Limited or a Cleer Limited authorized service provider; (g) Products whose seals are tampered; (h) Products whose serial numbers have been removed or defaced from such Product; (i) modifications, alterations or repairs to the Product made by a party other than Cleer Limited or a party authorized by Cleer Limited; 0) any failure by End User or a third party to comply with environmental and storage requirements for the Product specified by Cleer Limited, including, without limitation, temperature or humidity ranges; or (k) use of the Product in combination with any third-party devices or products that have not been provided or recommended by Cleer Limited.
LIMITATION ON DAMAGES: CLEER LIMITED SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THIS WARRANTY.
DISCLAIMER THE LIMITED WARRANTY SET FORTH HEREIN IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS RELATING TO THE PRODUCT, WHETHER EXPRESS OR IMPLIED, AND CLEER LIMITED EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING OR USAGE OF TRADE AND AGAINST HIDDEN DEFECTS, TO THE FULLEST EXTENT PERMITTED BY LAW. CLEER LIMITED DOES NOT WARRANT THAT THE PRODUCT WILL MEET THE CUSTOMER’S REQUIREMENTS OR THAT USE OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM CLEER LIMITED OR ELSEWHERE WILL CREATE ANY WARRANTY NOT EXPRESSLY STATED IN THIS WARRANTY.
Recycling
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96 EC:
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.
FCC Statement
The device complies with RF specifications when the device used at 0mm from your body. Hereby, Cleer Limited. Declares that the product compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.
Compliance with FCC rules
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure requirements. The device can be used in portable exposure conditions without RF restriction.
Register your product and get support at www.cleeraudlo.com ©2019 Cleer Limited. All rights reserved.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Cleer Limited is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptx is a product of Qualcomm Technologies International, Ltd. Qualcomm Is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptx is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. Made in China.
Support
Find this user manual on
www.cleeraudio.com
Follow us on social media @Cleersound
FAQs
Since the Enduro 100 lacks multipoint connectivity, only one Bluetooth signal can be connected at once. However, take a look at our Enduro ANC, which is now on sale and does offer a multipoint connection in addition to many other features.
Because the acoustic qualities of aptX Adaptive surpass the necessity for a tighter latency than 80ms, which is what Adaptive is rated at, we decided that using it was the best option. This possibility made the most sense because it was made for a high-performance audio device rather than a gaming headset.
They’re made by Cleer. similar to most electronics
In reality, both. The extendable band’s connection to the earcups is concealed by several plastic clips that also hide the wires. However, the headband’s top is just brushed metal with cushioning underneath. Depending on head size, this enables some adjustments to make the headphone tighter or looser. I’ll reload the Flex to Fit video that we had on the page because it appears to have disappeared. This video provides instructions on how to proceed and a clear view of the top of the headband. The upgrade will take around 24 hours, though. Thank you for alerting me to this.
I don’t want to be vague, but there are two possible answers. It depends on your gaming system because this audio headphone is incompatible with Playstation and Xbox’s unique wireless connections. But you can use the included USB-C to 3.5mm connection to connect to the controllers. You can use Bluetooth connections or a direct connection to play computer games. Although this product uses Qualcomm’s Bluetooth 5.0 low latency chip set, there is a risk that there will be a small delay when on the Bluetooth signal. I wish the answer could be yes or no, but it depends on what and how you’re connecting up.
Turn off the first Bluetooth device and then connect ENDURO 100 to it. Once the headphones are in pairing mode, press and hold the power button once more. Next, choose the second electronic device, go to the Bluetooth settings, choose the ENDURO 100, and connect.
These wireless headphones are lightweight and comfy, and they also include a quick-charging feature; a 10-minute charge will give them 13 hours of playback time. Using the included USB-C connector, a full charge may be achieved in just 3 hours.
The Enduro 100 headphones do not have noise cancellation. Please take a look at the Enduro ANC, which is now for sale, for that alternative. We appreciate you showing interest in our products.
Both are compatible with this. You have the option of a 3.5 mm cable attachment or a wireless Bluetooth connection.
I need a device with excellent volume control hiss is not increased by the headphones. They play as loudly as a streaming device, such as an iPhone, but the sound quality is far better. For high fidelity, they increase frequency response rather than volume.
Sadly, there isn’t a method that I am aware of for converting a digital HDMI output stream to an analog input signal for headphones. In order to function, headphones require an analog signal. I’m not even sure if this TV has an HDMI output plug; the only one that might exist is an ARC HDMI plug, but I highly doubt it would function. You can use these headphones to connect to the TV through Bluetooth since this TV does offer an output Bluetooth signal. I am aware of no other method to connect the Enduro 100.
It most certainly is; I have a 12 Mini, and it functions flawlessly. We appreciate your interest in our 100-watt Cleer Audion Enduro.
The LED will blink in red and white after being tapped five times on either earpiece. To pair the earbuds, choose your “Cleer GOAL” from the Bluetooth device list.
When the power comes on, press the power button for 5 seconds. Turn on your headphones. Place your device near the right earcup with NFC turned on.
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
