S1U2 POS Terminal
Product Information
Product Name: Castles S1U2 POS Terminal
Manufacturer: Castles Technology Co., Ltd.
Version: 1.1 Nov. 2022
Model Number:
CRT-S1-14-02-V1.1-CE-FCC-IC-UL-CB
Manufacturer Address: 6F, No. 207-5, Sec. 3,
Beixin Rd., Xindian District, New Taipei City 23143, Taiwan
R.O.C.
Manufacturer Website: http://www.castech.com.tw
Product Usage Instructions
1. Regulatory instruction of usage:
- Before using the terminal, please check if it has been
disassembled, modified, or shows any abnormal situation. If yes,
please do not use. - Please stay away from strong electromagnetic waves, such as
microwave ovens, magnets, shoplifting prevention devices,
high-voltage wires, automatic doors, communication antennas,
etc. - If condensation occurs when moving from a cold place to a warm
place, do not use the unit until the connected water droplets
evaporate. - Static electricity may occur in some places (such as where you
use a carpet). Avoid leaving the unit in the sun for a long time
and operate it carefully as it is a precision instrument. Do not
apply impact, drop or heavy objects on top of the unit. Do not
attach dust, oil, etc. to a part of the power terminal and avoid
scratching it.
2. Hardware Setup:
The Castles S1U2 POS Terminal consists of various parts:
- Front:
- Contactless Card Landing Zone
- LCD Display
- Smart Card Reader
- Magnetic Stripe Reader
- Front Camera
- Rear:
- Product Label
- MDB Port
- Ethernet Port
- GSM Micro SIM Card Slots
- SAM Card Slots
- USB Type A Slot (5Vdc, 0.5A max.)
- USB Type C Slot (5Vdc, 0.5A max.) Note: USB Type A Slot + USB
Type C Slot: 0.5A max. - Antenna Slot
- Bottom:
- Aiming LED
- Barcode scanner
- Illumination
- Speaker
- Left side: (No specific information
provided) - Right side: (No specific information
provided)
Please refer to the user manual for detailed instructions on
operating, configuring, and utilizing the advanced features of the
Castles S1U2 POS Terminal.
CASTLES TECHNOLOGY
S1U2 POS Terminal
Book 2 User Manual S1U2
Version 1.1 Nov. 2022
CRT-S1-14-02-V1.1-CE-FCC-IC-UL-CB
Castles Technology Co., Ltd.
6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw
Castles Technology Co., Ltd.
Pg. 1
WARNING
Information in this document is subject to change without prior notice.
No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd.
All trademarks mentioned are proprietary to their respective owners.
Castles Technology Co., Ltd.
Pg. 2
Revision History
Version 1.0
1.1
Date
Descriptions
Oct.07, 2022 Initial creation.
Nov.14, 2022
1. Modify Terminal to S1U2. 2. Modify value of Voltage and Current. 3. Add Warning on page 14.
Author Dustin
Dustin
Castles Technology Co., Ltd.
Pg. 3
Contents
1. Introduction…………………………………………………………………………………………………… 5 2. Hardware Setup……………………………………………………………………………………………… 6
2.1. Parts of the Terminal ………………………………………………………………………………. 6 2.2. Insert SAM Card …………………………………………………………………………………… 10 2.3. Insert GSM Micro SIM Card ……………………………………………………………………. 11 3. Appendix …………………………………………………………………………………………………….. 12 3.1. CE ……………………………………………………………………………………………………… 12 3.2. FCC ……………………………………………………………………………………………………. 12 3.3. IC……………………………………………………………………………………………………….. 13 3.4. UL / IEC 62368-1 ………………………………………………………………………………….. 14 3.5. Detachable Antenna Usage ……………………………………………………………………. 15
Castles Technology Co., Ltd.
Pg. 4
1. Introduction
This document provides a guideline for operating and configuring Castles S1U2 terminal.
The scope of this document includes setting up the terminal, basic operation, application lifecycle, and some advanced features.
Regulatory instruction of usage
Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use.
Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc.
Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate.
Static electricity may occur in some places (such as where you use a carpet). Please do not leave it in the sun for a long time. Please operate the unit carefully as it is a precision instrument. Do not apply impact,
drop or heavy objects on top of the unit. Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch.
Castles Technology Co., Ltd.
Pg. 5
2. Hardware Setup
2.1. Parts of the Terminal
Front 1
2
S1U2 1. Contactless Card Landing Zone 2. LCD Display 3. Smart Card Reader 4. Magnetic Stripe Reader 5. Front Camera
Castles Technology Co., Ltd.
4 5
3
Pg. 6
Rear 6
13
7
12
8
11 9
10 S1U2
6. Product Label 7. MDB Port 8. Ethernet Port 9. GSM Micro SIM Card Slots 10. SAM Card Slots 11. USB Type A Slot (5Vdc, 0.5A max.) 12. USB Type C Slot (5Vdc, 0.5A max.) Note: USB Type A Slot + USB Type C Slot: 0.5A max. 13. Antenna Slot
Castles Technology Co., Ltd.
Pg. 7
Bottom
14 15
16
14. Aiming LED 15. Barcode scanner 16. Illumination 17. Speak
17 S1U2
Castles Technology Co., Ltd.
Pg. 8
Left side
Right side
18
18. microphone
Castles Technology Co., Ltd.
Pg. 9
2.2. Insert SAM Card
SAM1
SAM2
S1U2
Insert SAM card into desire slot.
SAM 1: Cut corner is on the upper left side.
SAM 2: Cut corner is on the bottom left side.
Castles Technology Co., Ltd.
Pg. 10
2.3. Insert GSM Micro SIM Card
SIM2
SIM1 S1U2 Insert GSM Micro SIM card into desire slot. SIM 1: Cut corner is on the upper left side. SIM 2: Cut corner is on the upper right side.
Castles Technology Co., Ltd.
Pg. 11
3. Appendix
3.1. CE
Operations in the 5.15-5.35GHz band are restricted to indoor usage only
3.2. FCC
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Castles Technology Co., Ltd.
Pg. 12
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
3.3. IC
Industry Canada statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.
Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.
Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués.
Castles Technology Co., Ltd.
Pg. 13
3.4. UL / IEC 62368-1
Warning: Power cord shall be connected to a socket-outlet with earthing connection.
Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations.
Warning: This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or “Limited Power Source”), rated 9-48 Vdc, 1.5-0.5 A minimum, Tma = 40 degree C minimum.
Attention: le cordon d’alimentation doit être branché sur une prise secteur avec mise à la terre.
Attention: Risque d’explosion si la batterie est remplacée par une de type incorrect Éliminer la pile usagée conformément à la réglementation locale en vigueur.
Attention: Le produit est destiné à être alimenté par un adaptateur secteur ou source d’alimentation CC répertorié « L.P.S. » (ou “Source d’alimentation limitée”) et est évalué à 9-48 Vdc, 1.5-0.5 A min., Tma = min. 40 degrés C.
Warning: The equipment is only suitable for mounting wall at height 2m.
Attention: L’équipement ne convient que pour un montage mural à une hauteur 2 m.
Castles Technology Co., Ltd.
Pg. 14
3.5. Detachable Antenna Usage
This radio transmitter [IC: 27350-S1U2001] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Le présent émetteur radio [IC: 27350-S1U2001] a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l’exploitation de l’émetteur.
Manufacturer
Model Antenna Type Max Gain (dBi) Impedance ()
ADVANCED WIRELESS & ANTENNA INC
ADVANCED WIRELESS & ANTENNA INC
WWAN WLAN
Dipole Antenna for LTE application
PIFA Antenna for WIFI application
2.66 dBi 4.427 dBi
50 ohm 50 ohm
SPORTON INTERNATION INC NFC
Loop antenna
N/A
50 ohm
Note: The POS Terminal will install in vending machine or gas station machine in the future and the antenna will install on top of machine.
Castles Technology Co., Ltd.
Pg. 15
