12 LED
Assembly instructions
Standing light
Scope of delivery
Assembly instructions
Safety information: Always interrupt the power supply prior to assembly, cleaning, or maintenance. maintenance may only be carried out by authorized technicians.
Caution: Risk of burns during operation and cooling from the light source and adjacent parts. The electrical connection may only be performed by an expert! Never look directly at an LED light source. LEDs are sensitive to pressure and acid; do not touch or put pressure on them.
Electrical connection
Operating mode «Multisens»
Operating instructions
Operating mode «Dimmable»
To change the direction of the setting, release the button and hold it again.
Operating mode «Multisens»
Function description: Multisens allows fully automatic operation of the lamp at the workstation. The lamp operates by way of a light sensor and motion detection sensor. The light sensor ensures that the lighting conditions at the workstation do not change (continuous light control function). The motion detection sensor recognizes if a person is present and switches the lamp on or off depending on this (motion detection function).
Belux AG
Neufeldweg 6
5103 Switzerland
T+41 61 316 74 01
[email protected]
belux.co
