F3206-US 10A WiFi Smart Plug
Product Information
The 10A Wi-Fi Smart Plug Model F3206-US is a digital apparatus
that can be used to control various electronic devices remotely
through an app. It has a rated voltage of 100-240V~, a rated
current of 10A (Max.), and an AC frequency of 50/60Hz. The maximum
load power of this device is 1100W.
Product Usage Instructions
- Install the Smart Life app by scanning the QR code (compatible
with Android & iOS system) or searching for it in the App Store
or Google Play. - Connect the SmartPlug to a power source.
- Turn on Wi-Fi on your phone and connect to it.
- Open the Smart Life app and click on “Add new devices”.
- Select “Plug” and input your Wi-Fi password when prompted.
- Click “Next” and follow the on-screen instructions to complete
the setup process. - Once configured, you can use the app to turn the device on/off,
set timers, and personalize settings. - To reset the device to factory settings, press and hold the
power switch for a long time.
Note: This device should be installed and operated with a
minimum distance of 20cm between the radiator and any part of your
body. Series connection is not allowed, and high voltage should be
disconnected before servicing. Any changes or modifications not
expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. Consult a
radio/TV technician for help if needed.
55
1.Install APP
2. Usage scenarios
3. Register APP
4. Configure
5. Experience
5. Experience
Power switch Long press to Recovery Factory setting
Wi-Fi indicator Configuration mode indicator flash 5-6times/second
Return Current page
Personal setting
” Smart Life
Led Switch
Scan QR code (compatible with Android & iOS system), or search “Smart Life” in APP Store or Google Play
SmartPlug Connect power
Led Switch
Phone connect toWiFi
Open APP
Add new devices Click “Plug” enter Input WiFi password
operation interface
Click “Next”
ON/Off key
Time setting
Smart Life
1
2
3
4
5
6
6. Parameters
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
ISED Statement This Class [B] digital apparatus complies with
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment
#
Product: 10A Wi-Fi Smart Plug Model: F3206-US Rated Voltage: 100-240V~ Rated Current: 10A(Max.) AC Frequency: 50/60Hz Max.Load Power: 1100W
ON/Off Button Press Long Time,Restore to Factory Settings
Power Socket State Light
Series Connection are not allowed
High Voltage – Disconnect power supply before servicing
La haute tension-Déconnecter l’alimentation électrique avant l’entretien
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Exposure: A distance of 20cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna.
Non-modification Statement: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Canadian CAN ICES-3(B). Cet appareil numérique de la classe [B] est conforme à la norme NMB-3(B)du Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire debrouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil ettoutes les personnes.
CAN ICES-3 (B)/NMB-3(B)
7
radio/TV technician for help.
fonctionnement
385
80
9NN
YNN
pNN
”
#
9
J
)86 $5*%
9
