YNCJ870-12MB Shower System Faucet

Product Information

The product is a shower system faucet that includes a pressure
balanced diverter valve, handheld shower kit with a flexible hose,
shower head, ceiling shower arm and flange kit, and body jets. The
faucet is designed for use in showers and provides control over
water flow and temperature.

Product Usage Instructions

Installation Instructions

1. Before installation, it is recommended to consult a
   professional plumber who is familiar with the Canadian plumbing
   code and local municipality plumbing codes.
2. Ensure that urge arresting devices are installed as required by
   the Canadian plumbing code to eliminate water hammering.
3. Create an adequate opening to easily access connections or
   other plumbing devices for maintenance or repair.
4. Apply plumber’s putty to ensure a watertight seal during
   installation.
5. Firmly hand tighten the hose to the valve and use a proper
   wrench to add a quarter turn. Tighten more if necessary.
6. The model shown in the installation steps may differ from the
   one in the box, but the connection type and installation steps
   remain the same.

Shower Valve Body Installation

1. Identify the hot and cold water supply pipes.
2. Attach the valve body to the hot and cold water supply pipes
   using appropriate fittings and connectors.
3. Ensure that the valve is in the “OFF” position.
4. Turn on the hot and cold water supply to check for any
   leaks.
5. Once satisfied, turn the valve to the “ON” position to allow
   water flow.

Body Jets Installation

1. Identify the desired locations for the body jets.
2. Attach the body jets to the designated spots on the shower wall
   using appropriate fittings and connectors.

Handshower Installation

1. Connect the flexible hose to the handheld shower.
2. Attach the wall bracket to the desired location on the shower
   wall.
3. Place the handheld shower in the wall bracket.

Head Shower Installation

1. Attach the shower head to the ceiling shower arm using
   appropriate fittings and connectors.

PRODUCT DRAWING
body jets Hand Shower holder Faucet diverter valve

No. Description

SHOWER SYSTEM FAUCET

A

Pressure balanced diverter valve

Installation instruction

D

A-1

Valve

A-2

Face plate with sealjoint

C

A-3

Diverter knob kit

A-4

set screws

A-5

Handwheel stem

A-6

Shower valve knob kit

E

A6-1 set screws

A6-2 Trim cap (A4-2 included)

B

Handheld Shower Kit with Flexible Hose

B-1

Flexible hose

B-2

Wall Bracket

B-3

Hand shower

C

Shower head

B

D

Ceiling shower arm and flange kit

E

body jets

B2 B3
B1

A1

A2

A3

A4

A

A5

A4

A6

A6-1

A6-2

MB/BN/BG/CH/ORB CARE INSTRUCTIONS DO NOT:

We recommends using a professional plumber for all installtion and repair. Please inform yourself about the canadian plumbing code`s regulations and your local municipality plumbing codes before instaillation.the canadian plumbing code requires the installation of urge arresting devices to eliminate water hammering.allow an adequate opening in orderto easilyaccess connections or other plumbing devicesfor maintenance or repair.

Plumber’s putty

RECOMMENDED TOOLS

Thread seal tape

Included

* Apply plumber’s putty under the plastic cover deck plcta to seal your installation. Appliquez du mastic pour plombier sous la sousplaque de plastique pour rendre votre installation étanche.

CONNECTION ADVICE
Firmly hand tighten the hose to the valve and add a quarter
turn using the proper wrench Tighten more if needed

The model shown in the installation steps may differ from the one in box however connection type and installation steps are the same.

INSTALL THE SHOWER VALVE BODY
A

HOT

Cold

Hot

A3
HEAD SHOWER HAND SHOWER BODY JETS

COLD

B1

INSTALLATION STEPS

A1

A2

OFF ON
OFF ON
OFF ON

A4
B
ON/OFF CONTROL

TEMPERATURE -CONTROL

INSTALL THE BODY JETS

INSTALLATION OF THE HANDSHOWER
C

INSTALLATION OF THE HEAD SHOWER
D