DRNX Espresso Martini Machine

Product Information

The product is a beverage dispenser manufactured by DRNX. It is
designed to dispense beverages in a controlled and efficient
manner. The dispenser consists of various components that work
together to provide a seamless beverage dispensing experience.

Components

• 1 — Tap Handle
• 2 — Tap Body
• 3 — Nozzle
• 4 — Exterior
• 5 — Inlet Connector
• 6 — Main ON/OFF Switch
• 7 — Legs
• 8 — Forward Plate
• 9 — Rear Plate
• 10 — Side Panel(s)
• 11 — Infuser Dial
• 12 — Power Plug
• 13 — Vents/Exhaust
• 14 — Control Panel
• 15 — Beverage Tube
• 16 — Elbow Connectors
• 17 — Pre-Filter
• 18 — BROOD Beverage Container
• 19 — Inlet for Container
• 20 — Thermostat
• 21 — Calibration Knob
• 22 — Ventilation Valve
• 23 — Power ON/OFF

Specifications

• Power Supply: 100-120V/60Hz; 200-240V/50Hz
• Nominal Power: 334W

DRNX BY BROOD

DRNX is a brand by BROOD that specializes in beverage
dispensers. The product is designed and manufactured with the
highest quality standards to ensure a reliable and enjoyable
beverage dispensing experience.

Product Usage Instructions

1. Setting up the Beverage Dispenser

1. Place the dispenser on a stable and level surface.
2. Connect the power plug to a suitable power outlet.
3. Attach the legs to the dispenser if required.
4. Ensure all components are properly assembled and in place.

2. Dispensing Beverages

1. Turn on the main ON/OFF switch (component 6) to activate the
   dispenser.
2. Adjust the calibration knob (component 21) to set the desired
   temperature for the beverages.
3. Use the tap handle (component 1) to dispense the beverage.
4. Control the flow rate by rotating the infuser dial (component
   11).

3. Maintenance and Cleaning

1. Regularly clean the exterior (component 4) of the dispenser
   using a mild detergent and a soft cloth.
2. Clean the beverage tube (component 15) and nozzle (component 3)
   after each use to prevent clogs and maintain hygiene.
3. Refer to the user manual for detailed instructions on cleaning
   and maintenance procedures.

Follow these instructions carefully to ensure optimal
performance and longevity of your DRNX beverage dispenser.

COMPONENTS

23 8

13 11
9 10
15

1

2 3

4

7

20

21

6 12 5 22

14 16

16 17

18 19

1 — Tap Handle 2 — Tap Body 3 — Nozzle 4 — Exterior 5 — Inlet Connector 6 — Main ON/OFF Switch 7 — Legs 8 — Forward Plate 9 — Rear Plate

10 — Side Panel(s) 11 — Infuser Dial 12 — Power Plug 13 — Vents/Exhaust 14 — Control Panel 15 — Beverage Tube 16 — Elbow Connectors 17 — Pre-Filter 18 — BROOD Beverage Container

19 — Inlet for Container 20 — Thermostat 21 — Calibration Knob 22 — Ventilation Valve 23 — Power ON/OFF

Width: 9.75in Height: 14.75in Depth: 18.25in Weight: 73lbs Dispensing Capacity: 1.5L/min (0.4gpm) Coffee Temp at Tap: 2°C (36°F)

SPECIFICATIONS
Power Supply: 100-120V/60Hz; 200-240V/50Hz Nominal Power: 334W

DRNX BY BROOD

5