User Guide
PRODUCT SPECIFICATIIONS
| Product Name | two |
| Wireless Version | V5.0 |
| Operation Range | _10 Metres (Unobstructed Effective Range) |
| Earbud Charging Time | .1.5 hours |
| Charging Case Charging Time | E2 hours |
| Play Time | 3-4Hours (at 75% volume) |
| Talk Time | 3 hours (at 75% volume) |
| Standby Time | 20 Hours |
| Wireless Profiles | A2DP,AVRCP,HFP,HSP |
| Earbud Battery Type | 40mAh Rechargeable Lithium Batteries |
| Charging Case Battery Type | 400mAh Rechargeable Lithium Batteries |
HOW TO PAIR
First Time to Pair with Devices:
Note: Before first-time use, please remove the isolation film on the earbuds
1, Open the charging case and take the earbuds out. Earbuds will turn on automatically. Then enter pairing mode after the Right & Left earbuds are connected with each other(One of the earbuds indicator flashes blue and red).
2, Enable the Bluetooth on your device, search for earbuds pairing name “Q08” and click to connect.(There will be a voice prompt “connected” after connected, and the earbuds indicators turn off) Second Time to Pair with Devices ：
Take two earbuds out of the charging case, they will re-connect with last paired device automatically. (TWS binaural pairing takes 4 seconds, the connection between Bluetooth earbuds and device takes 8 seconds.)
* The earbuds turn off automatically when you put them back to the charging case. To manually power off, press and hold the earbud button for 5 seconds; To manually power on, press the earbud button once.
HOW TO CARE FOR YOUR EARBUDS
Always store the earbuds in the charging case and safely protected them.
Avoid storage at extreme temperatures(Above 65℃/149℉ or below -10℃/14℉). Otherwise, it would shorten the battery life and may affect the earbuds.
CONTROLS
Listening to Music
| Play Music | Click either earbud button for once. |
| Pause Music | Click either earbud button for once. |
| Next Songs | Double click R once |
| Previous Songs | Double click L once. |
| Activate/Stop Siri | Long press 2s either earbud button. |
Making and Answering Calls
| Answer call | Click either earbud button for once. |
| End Call | Click either earbud button for once. |
| Reject Call | Press and hold either earbud for 2S. |
| Hold Current Call,, Answer Second Call | Click either earbud button for once. |
| End Current Call, Answer First Call (Being Held) | Click either earbud button for once. |
| Reject Second Call | Press and hold either earbud for 2S. |
| Switch Calls | Press and hold either earbud for 2S. |
| Switch Phone Chat Device | Press and hold either earbud for 2S. |
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
