Idance Bb10k2 Bluetooth Karaoke Speaker User Manual

PARTY BALL2
BB10K2
BLUETOOTH KARAOKE System with DISCO BALL
User Manual

What is included in the Box

1 x BB-10K2(V2) unit
1 x User manual
1 x USB charging cable
2 x Wired Microphone

Thanks for your Purchase of iDance BB-10K2(V2), Please read the manual with attention before use
This product meets the essential requirements of Directive 2014/53/EU.
This product complies with the requirements of the Europe
Manufactured by iDance http://www.idanceaudio.com/documentation/declarationofconformity/

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

CAUTION THE RISK OF ELECTRIC SHOCK DOES NOT OPEN

CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with an arrowhead symbol inside an equilateral triangle is intended to alert the user of the presence of uninsulated “hazardous voltage” within the product’s enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to alert user of the presence of the important operating and maintenance (servicing) instructions in the literature accompanying the product.

NOTES
Please do not attempt to open the back cover or power adapter as opening or removing the covers may expose you to dangerous voltage or other hazards, and it will also cause the restricted servicing to be disabled: There are no user servicing components inside.

NOTES
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

NOTES

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions. Heed all warnings.
3. Follow all instructions. / Tenir compte des avertissements.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
16. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
17. The MAINS plugs used as the disconnect device, which shall remain readily operable.

PANEL DESCRIPTION

PARTY BALL BB-10K2(V2)

GENERAL OPERATION

Function Description

Press and hold the button to turn on/ off the unit.
Aux + BT + Mic can work together to mix.
Light Function Description

1. Default Disco ball light is on when the unit power on.
2. Press and hold the LED key to turn on/ off the light.

Bluetooth Function Description

1. Default is Bluetooth mode when the unit is powered on. It’s under pairing state. Using your Bluetooth device to scan for available devices and select “iDance BB-10K” to connect. Speaker will ring a prompt voice once paired successfully.
2. Press connect/ disconnect bluetooth.
3. Press – to decrease volume. Press and hold – to the previous track.
4. Press + to increase volume. Press and hold + to the next track.

Aux Function Description

1. Connect your device and speaker with a 3.5mm Aux-in cable to play your music.
2. Press – to decrease volume.
3. Press + to increase volume.
4. Aux in the cable is not included.

Charging Indication

1. Charging is needed when the battery is low, the product will into a low-power self-protect state, and the volume will drop to 70%.
2. Use DC 5V charging cable (adapter) for charging.
3. Note: Please charge for more than 12H for the first time, please keep the battery’s electricity if the battery doesn’t work for a long time, or the battery will damage.

Specifications

The undersigned, iDance co declares that the radio equipment of the BB-10K2(V2) type complies with the 2014/53/EU directive. the complete text is available at www.idanceaudio.com

• The Bluetooth® word, mark, and logo are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by iDance is under license. Other trademarks and trade names are those of their respective owners.

Made in China
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WORLD
HEADQUARTERS:
iDance H.K.
Unit i, 6/F., MG Tower,
133 Hoi Bun Road, Kwun Tong,
Kowloon, Hong Kong.
Copyrights 2020 iDance Distribution Limited – All Rights Reserved
www.idanceaudio.com

References

• Home | iDance