teno
start guide
Technical specifications
| Dimensions Weight Shell material Inner body material Bluetooth Speaker configuration Amplifier Frequency range True Stereo Pairing (TWS) Microphone Power Battery type Battery capacity Speaker battery life Light battery life Charging Charge time Battery indicator Light source/brightness Light temperature Brightness levels Recommended room size | 5 ” (13cm) diameter x 2 ¾” (7cm) height Approx. 1.6 lbs (725 g) Cast resin and natural sand High-grade acoustics fabric Version 5.0 1 x 45mm full-range driver and 1 passive radiator 20W Class-D amplifier 60-20,000 Hz Available between two Teno Noise-canceling microphone for great clarity 5W (0.1W for standby) Rechargeable lithium-ion 4000 mAh Up to 8 hours at 50% volume Up to 4 hours at 100% brightness 5V/2A via USB-C charger (included) 5.5 hours White (while charging)/Green (fully charged) High-output LED/250 lumen 2700k (soft warm white) 25/50/75/100% 5-20 m²; 50-200 ft², small social gatherings, in the office and mid-sized rooms around the home |
For further product information and warranty, visit hellolumio.com/pages/my-teno, or contact us at [email protected]. teno start guide
Instructions
Your Teno is controlled via touch. Separate the two halves slightly to turn on the light. Fully separate to turn on the speaker. Teno’s Bluetooth connection is automatically discoverable from your device when you fully open Teno and hear the chime sound.
Tips
Sound indicators
| Chime Bird chirping Wings fluttering Water drops | Speaker on/off Bluetooth/TWS connected to device Bluetooth disconnected Low battery |
Light
Tap the center top surface to activate the dimmer. There are four levels of brightness to choose from.
Volume
Slide two fingers up and down along the curve at the center of the bowl to adjust volume.
Speaker
Tap the center top surface closer to the edge to receive or end a call.
Reset
Closing and re-opening Teno will resolve most issues. If that doesn’t work, hard re-set the system by pressing the reset button.
Bluetooth disconnect
If you don’t see “Teno” on your phone, ensure that Teno is not connected to another device. Disconnect first. If connection problems continue, try closing and re-opening Teno.
Maintenance and care
For fabric, wipe dust off the surfaces using a dry, soft cloth. Do not use liquid or aerosol cleaners. To remove stains or dirt, we recommend using melamine sponge cleaner (also known as magic eraser) or a soft, damp cloth and a solution of water and mild detergent, such as washing-up liquid. For the outer shell, gently wipe the shell using a soft, dry cloth. Use a brush with soft bristles for dust removal in grooves or crack areas. Do not spray water or cleaner directly onto the surface.
Scan me
Point your camera at this QR code for a Teno instructional video.
My Teno
