endurance peak
quick start guide
WHAT’S THE BOX
how to wear
ATTACH ear tips and ENHANCERS Mix and match for a perfect fit and audio performance
TWISTLOCK™ Technology
Adjust ear hook
Wear and pull down the ear hook for a secure fit
first-time use
power on &connect
automatic pairing
Pairing
POWER OFF
Manual Controls
| power on & connect to the device | CONNECTING |
 |
BUTTON COMMAND
Charging
WATERPROOF IPX7
led behaviors
TECHSPEC
| Model: | Endurance Peak II |
| Driver Size: | 10 mm/0.4” Dynamic Driver |
| Power supply: | 5.0 V 1 A |
| Earpiece: | 13 g per pc (26 g combined)/0.03 lbs per pc (0.06 lbs combined) |
| Charging case: | Lithium-ion Battery (60 mAh/3.7 V) |
| Headset battery type: | Lithium-ion Battery (770 mAh/3.7 V) |
| Charging case battery type: | < 2 hrs from empty |
| Charging time: | 6 hrs |
| Music playtime with BT on: | 20 Hz – 20 kHz |
| Frequency Response: | 16 ohm |
| Impedance: | 95 dB SPL@1 kHz |
| Sensitivity: | 95 dB SPL |
| Maximum SPL: | -38 dBV/Pa@1 kHz |
| Microphone sensitivity: | 5 |
| Bluetooth version: | A2DP 1.3 AVRCP 1.5 HFP 1.7 |
| Bluetooth profile version: | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitter frequency range: | < 13 dBm |
| Bluetooth transmitter power: | GFSK, π/4 QPSK, 8DPSK |
| Bluetooth transmitter modulation: | GFSK, π/4 QPSK, 8DPSK |
 |  |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue. Device types: (IC: 6132A-JBLENPEAK2) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.6712 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLENPEAK2
Maximum operation temperature: 45°C
FCC ID: APIJBLENPEAK2
R210-144512
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
HP_JBL_Endurance Peak II_QSG_SOP_V11
Anatel — Agência Nacional de Telecomunicações
